Chronoclassic Speedo
The Chronoclassic speedo from motogadget is an analog speedometer with many additional digital functions in a classic round housing.
Technically identical to the motoscope classic speedo, the Chronoclassic speedo is characterized by its black face and white pointer. The design is reminiscent of old Smiths' instruments.
Technically identical to the motoscope classic speedo, the Chronoclassic speedo is characterized by its black face and white pointer. The design is reminiscent of old Smiths' instruments.
Versions
Another special feature of the Dark Edition is the dark LC display. It gives the instrument an even more harmonious appearance.
However, we expressly point out that the readability is reduced in direct sunlight. If you value the best possible readability, please use the green standard display.
The technically identical instrument is also available with a white face (see motoscope classic speedo) or as an analog tachometer (see Analog-DZM CLASSIC series).
However, we expressly point out that the readability is reduced in direct sunlight. If you value the best possible readability, please use the green standard display.
The technically identical instrument is also available with a white face (see motoscope classic speedo) or as an analog tachometer (see Analog-DZM CLASSIC series).
scope of delivery
- Instrument with approx. 55 cm connection cable
- Complete plug connection
- Fuse
- Speedometer sensor M5 x 0.5 (fine thread) with 150 cm connection cable
- 2 x magnet
- Mini push-button
- 3x VA screws M4
- Detailed installation and operating instructions
Please note that temperature and pressure sensors must be ordered separately (see accessories).
Specifications and features
| Technical specifications | |
| Mounting diameter | 80 mm |
| Total diameter (screw ring): | 85 mm |
| Depth without cable gland | 34 mm |
| Weight | approx. 230 g |
| Attachment | 3 x M4 threaded bushes |
| Current consumption in operation | approx. 200 mA (depending on load) |
| Current consumption in idle state | 0 mA |
| Operating voltage | 9V - 18V |
| operating temperature | -20 ° ... + 80 ° C |
| function | Measuring range |
| Speedometer (analog with pointer) | 0 - 200 km / h or mph, above on the LC display |
| Trip odometer | up to 999 km or mi |
| Total kilometers (adjustable) | up to 250,000 km or mi |
| Travel time display | 0 - 99:99:99 h / min / s |
| Tachometer (on LCD) | 0 - 20,000 rpm |
| adjustable speed warning (internal LED and external shift light) | 0 - 20,000 rpm |
| On-board voltage display | 9V - 18V |
| NEW! Low voltage warning | LED flashes when the onboard voltage falls below approx. 11V - replaces the charge control lamp |
| Air temperature * (optionally instead of water temp.) | -20 - 80 ° C / -4 - 176 ° F with high / low warning |
| Water temperature * (alternatively instead of air temp.) | 40 - 120 ° C / 104 - 248 ° F with high / low warning |
| Oil temperature * | 40 - 160 ° C / 104 - 320 ° F with high / low warning |
| Oil pressure* | 0.5 - 8 bar / 8 - 116 psi with high / low warning |
| Time measurement 0 - 100 km / h or 0 - 60 mph | 0.0 - 99.9 sec. |
| momentary acceleration | (-20.0) - 20.0 m / s2 |
| Average speed | 0 - 350 km / h or mph |
| Maximum value speed | 0 - 350 km / h or mph |
| Maximum speed value | 0 - 20,000 rpm |
| max. positive acceleration | 0 - 20.0 m / s2 |
| max. negative acceleration | 0 - (- 20.0) m / s2 |
| Gear indicator | N, aisles 1 - 6 |
| green control LED | Idle (N) |
| yellow control LED | Turn signal left, right |
| blue control LED | High beam |
| red warning LED | various warning functions external (e.g. oil pressure switch), internal (speed, temperature, pressure, voltage) |
| Output for ext. Shift light | Switching capacity max. 1.4 A. |
