Our Anteris Complete Fender and Sissy bar kit for Honda Shadows includes everything you will need to mount up one of our curved fenders and a sissy bar to your VLX600! ZERO WELDING REQUIRED! Includes curved fender for 150-180 tires, Straight up Sissy Bar, Pressio Bolt-On Fender Mount Kit and all hardware necessary to mount everything to your bike You can carry a passenger on the fender, or you can strap a sleeping bag and a tent to it! This Kit will work with a mono strut setup or the factory mono shock, for either setup you will need to remove the fender subframe and cut off the rear fender support horns! This is Honda Shadow bobber kit is a huge value add to your bike!
Sissy bar is approximately 15" tall from the top of the fender to top of the sissy bar.
The only thing you will need is your muscles, a drill, and a drill bit! We made this kit so simple that you don't even have to do any math or take your shoes off to count! All hardware is 3/8-16" so only one drill bit is necessary. You will need to drill holes in the fender to mount the sissy bar and the fender mount, and to drill holes in your axle plates for the lower sissy bar bolts. You will need to remove the chain guard as well. Seriously, this is literally the easiest kit to use ever!
This Complete Kit includes the following parts -
Optional Upgrades- This kit works perfectly with our Mono Struts and Mono Strut E-Tanks
Yes, you can carry a passenger on this fender and sissy bar.
These are cake to install. You can attach them to your axle plates one of two ways:
TJ's Method - Locate the 3rd & 4th from the rear notch on your axle plate on each side and center punch each plate about 1/2" above the notches. You want to make sure the lower bung doesn't hit the adjustment notches and it doesn't hit the curved portion of the axle plate.
Drill a 5/16" hole and then tap it with a 3/8"-16 tap.
OR
Alternate Method - Drill a 3/8" hole and use a nylock nut on the bolt on the backside of the axle plate. Lay a length of chain over the center line of the tire, tape it down and lay the fender on this, it will give you a perfect fender height!
Move your sissy bar to the angle you want and mark the location of the holes on the fender, needed for the bolts to attach to the upper fender supports. Pull the fender off and drill the holes.
At the rear of the fender you will want to drill slightly oversized 3/8" holes to attach the Sissy Bar fender supports.
Perth County Moto Classic Logo tee - Black
Regular price $29.99Gift Card
Regular price $50.00Shopping for someone else but not sure what to give them? Give them the gift of choice with a Perth County Moto gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
*Take note that the gift cards are issued in Canadian currency.
Guardian Bell – Motorcycle Gremlin Bell – Ride Safe, Ward Off the Road Spirits
Regular price $26.95There’s a reason every rider knows and respects the legend of the Guardian Bell. When you mount this little bell onto your ride, you're doing more than just accessorizing—you’re joining a long-standing tradition of safety, brotherhood, and good karma on two wheels.
The Story & the Ritual
Decades ago, riders swore by the gremlin myth: mischievous spirits lurking on the open road, ready to sneak up on your bike and cause trouble. The bell? It’s the trap. Hang it low on your frame or swingarm, and the rumbling of the engine and the constant ringing keep those road gremlins busy until they slip off—never to bother you again.
And here’s the key: the power of this bell isn’t just in brass and steel—it’s in the gift. Someone who cares about you gives you this bell. That handshake, that nod between riders, the “ride safe” promise—all of it fuels the legend. Because you didn’t buy protection, you were given a shield.
Why This Bell from Us
At Perth County Moto, we’re more than a store—we’re riders. We’ve lived the open stretch, felt the wind, and know that every mile counts. This Guardian Bell isn’t only built solidly; it’s backed by our own commitment to your ride.
Whether you’ve just locked in your new bike, you’re gearing up for the big tour, or your buddy’s about to hit the road—this bell isn’t just a loop on your fork. It’s an “I’ve got your back” from someone who knows.
Product Details & How to Use
High-quality metal bell, ready to take the road vibes and ring loud and proud.
Compact size, easy to mount on the front fork, swingarm, or low frame-point—ideal location to trap those gremlins before they reach you.
Comes with mounting ring/clip for easy install.
Best hung low and visible, where it can rattle freely and reflect your ride’s character.
Gift-Ready for Riders
Perfect for new bike owners, long-haul buddies, custom builds, or just because you care. Because someone else giving the bell to you is what sets this apart.
Makes a meaningful stocking-stuffer, pit-box item, or “welcome to the club” present. Comes in a small gift bag with a message about the Guardian Bell lore.
Ride On With Confidence
Mount it. Trust it. Ride safe. With this Guardian Bell hung on your bike, you’re keeping the legend alive—and more importantly, keeping your eyes on the horizon.
KD - Sunglasses
Regular price $24.95Available in
MotoGirl Lara Cargo Riding Pants - Black
Regular price $395.00Lara Cargo Black Trousers
It's no secret who these cargo trousers were named after and once you put these on, you'll feel as kick-ass & adventurous as her when you're on your bike! These Lara's are great with boots, or long enough to go over ankle boots or shoes. Wear as casual when off the bike, they will become your favourite trousers!
Fitting: The Lara's are fitted with waist adjustment buckles. The fit of the Lara's will relax slightly after about an hours wear so if you are in between sizes, we suggest going for the size that best fits your hip measurements and then pulling the waist in with the adjusters to get your perfect fit!
Lindz wears a size 2XL in the Lara Cargo pants with a natural waist (39") and hip (44"). She is 5'9" and wears the regular inseam with a bit of length to spare! The tall inseam works well for anyone 5'10" & up. Please reach out if you have any questions!
Key Features:
PERFORMANCE & PROTECTION
Certified Garment: Class A EN 17092-4:2020
Knee & hip protection: Level 2 EN1621-1:2012
Construction:
Outer Layer: Cotton Twill / Spandex
Inner Layer: DuPont™ KEVLAR® / Polyester Mesh
DuPont™ and KEVLAR® are trademarks of affiliates of DuPont de Nemours, Inc.