Name: Motogadget m.button
Brand: motogadget
Price: 109.0 CAD
Availability: InStock

Motogadget m.button

$109.00

m.button

Another innovation from motogadget: the m.button.
It's a big help - in combination with the new m.unit blue, basic, and m.unit v.2 - in reducing 'cable clutter' and simplifying wiring harnesses.

Integrated into the handlebar tube - or any other adequate location - this tiny cylinder will electrically connect all handlebar instruments, switches, and buttons.
Using state-of-the-art bus technology, the m.button digitally processes signals and transmits them to the m.unit over a thin cable.
The electrical consumers will then be switched inside the m.unit.
All control wires are moved into the handlebar. This saves space, weight, labour, and time. A 'must have' for custom bikes with clean-look handlebars.

In simple facts:
a) normally, the operating current (e.g. headlight or turn signals) is transmitted directly via the wiring of the handlebar switches. Due to the high currents, cables with large cross-sections have to be routed from the fuse box to the switch and back to the electrical consumer.
The result: big cable bundles. Definitely, a 'no go' for custom bikes with restricted space or a concealed electrical system.

b) using the m.unit without the m.button, just a thin cable for each switch- or button-controlled feature has to be routed to the m.unit. These cables only carry minute control currents. All high loads and currents are switched directly at the m.unit and transmitted directly to the electrical consumers. This already leads to a significant reduction and simplification of the wiring harness. Here you can see the example of a circuit diagram.

c) using the m.unit blue, basic, or m.unit v.2 in combination with the tiny m.button, you will once again reduce the number of cables that have to be routed! All switches/buttons on the handlebar are connected at the shortest distance possible and concealed inside the handlebar. Consequently, you will have to route only ONE thin cable from the m.button to the m.unit. All loads and currents will be switched directly at the m.unit (see explanations above). A layout reduced to the max! Here you can see the example of a circuit diagram with the use of m.button

The m.button is completely moulded in, making it water-tight and resistant to vibrations.

Specifications and features

The m.button is equipped with connections for
- turn signal, left side
- turn signal, right side
- headlight (low beam and high beam)
- E-starter
- horn
- brake light switch, front brake

m.button – dimensions
Diameter: 12 mm
Length: 25 mm
Cable length: approx. 60 cm
Connecting cable to m.unit: approx. 200 cm
Weight: approx. 30 g

Attention: The only intended use of the m.button is in combination with m.unit blue or m.unit v.2

motogadget mo.switch basic

$117.00

mo.switch basic 3-button

The mo.switch basic is a universal, high-quality push-button control for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In combination with an electronic push-button control box (not included), these CNC-made push-buttons can switch all electrical units such as lights, indicators, electric starters, horn and much more.

CNC-milled from billet aluminum the housing is anodized in glossy black. Optionally, the button holder (inlay) is also available with a silver anodized colour. The compact housing is equipped with either two or three pushbuttons. All buttons are always in the direction to the driver.

The two or three buttons per unit are always black. A hidden M4 stainless steel mounting screw clamps the housing securely to each handlebar.

The individual buttons are of high quality, very robust and protected against vibrations and splash water (IP65).

Due to sufficient size and ergonomic pressure point (light, mechanical detent), they allow a safe operation - even when operating with a glove.

A single-wire or two-wire wiring is easily possible by two terminals per push-button. One terminal for ground is already provided internally for single-wire wiring. Cable routing in the handlebars is therefore easy.

In case of possible damage, the single push-buttons are available individually and can be replaced.

The mo.switch basic is of course compatible with all common push-button controls such as the mo.unit blue/basic.

Scope of delivery

mo.switch basic billet housing
2 or 3 push-buttons per unit
Manual

Prism Supply Co Vintage Safety Glasses

$36.00

Vintage Safety Glasses - Clear

Vintage-inspired safety glasses Contains side shields to keep bugs, metal, wood, etc. out of your eyes Lenses and frame are made of plastic If you're looking for our tinted safety glasses click here

"I wear these myself in the garage but also as riding glasses and I love them!" - Jeff

Motogadget mo.blaze disc

$120.00

mo.blaze disc

mo.blaze disc by motogadget – a turn signal for handlebar end installation in a trend-setting design.

The mo.blaze disc is the latest generation of turn signal lights. The characteristic feature of the LED turn signal is the transparent light-emitting disc on a compact aluminum base providing the harmonious finish of the handlebar end.

This is already the third generation of our turn signals using the motogadget TranzLight-Technology® (TLT, patent pending). This progressive approach to development is not limited to the miniaturization of turn signal casings. Furthermore, it creates new lighting concepts directly through a crystal-like plastic body. Only the precision of CAD calculations and state-of-the-art manufacturing processes allow this new design and its performance opportunities.

The luminous flux required for the TranzLight technology is generated by the intensiLED® procedure developed by motogadget. It consists of three important pillars:

Specifically selected, high output LED with maximum efficiency and 7W total output and a service life of more than 50,000 hours.
IC controlled constant power source with 330 kHz pulses.
Special collimator optics precisely bundles the emission light from the LED into the plastic body.

The subtle aluminum casing is used for the secure mount of the plastic body only and includes the electronic control system and high-end LEDs. Traditionally, the casing is machined using CNC technology, available with an anodized black or mirror polish surface, and furnished with an elegant finish of laser inscriptions.

The turn signal for handlebar end installation has a very low construction height and, due to the transparent disc, the m.blaze shows up with a very neutral and subtle look. That's why the m.blaze is the perfect match for many styles and all types of motorbikes.

Like any other conventional LED turn signal, the turn signal kit can be operated with load resistors or any of our load-independent flasher relays (m.flash, m.wave, m.stop, m.relais+).

The m.blaze disc has an E mark and front turn signal approval.

Always make sure to order a complete set consisting of the left and right-side turn signal assembly

Advantages

Completely unique, discrete design and functionality
Barely recognizable on handlebar when OFF
Extremely bright light to the front side, well-recognizable light output to the rear side
State-of-the-art, high-performance LED technology called IntensiLED
Electronic voltage conditioning and secure protection circuits
No need for turn signal indicator lights
Quite a harmonious finish for the handlebar end - especially when equipped with m-grip or other billet grips.

Specifications and features

Diameter	35 mm
Overall length	68 mm
Partial length outside handlebar	20 mm
Partial length inside handlebar	48 mm
Cable length	ca. 100 cm
Weight	approx. 40 g
Mounting	Delivered with rubber clamping parts for steel and aluminum handlebars (22 mm and 1 in.) with 14 mm to 21 mm I.D.
Power consumption	approx. 7 Watt

TC Bros Universal Frisco Gas Tank Mounting Kit

TC Bros Universal Frisco Gas Tank Mounting Kit

$28.00

Universal Frisco Gas Tank Mounting Kit

Includes 3/8"-16 Stainless steel button head bolts, 1018 mild steel tophat bungs, leather cushion washers, stainless steel washers.

TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack

TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack

$10.00

Leather Cushion Washers with 3/8 inch Hole 10 pack

These leather washers are perfect for protecting your paint and are more durable than rubber. The cushioning & dampening effect that these washers provide is perfect for installing between your frame and mounting tabs found on gas tanks, fenders, oil tanks, or anything else you want to protect from vibration. Also great for use under solo seat springs to prevent squeaking. Dimensions are 1 inch diameter x 3/8 inch hole x 1/8 inch thick. Sold in pack of 10 washers.

Prism Supply Co Vintage Safety Glasses - Tinted

Prism Supply Co Vintage Safety Glasses - Tinted

$36.00

Vintage Safety Glasses - Tinted

Vintage-inspired safety glasses Contains side shields to keep bugs, metal, wood, etc. out of your eyes Lenses and frame are made of plastic If you're looking for our tinted safety glasses click here

"I wear these myself in the garage but also as riding glasses and I love them!" - Jeff

Prism Supply Co Cloth Spark Plug Wires

$27.00

Cloth Spark Plug Wires

Prism Supply Co runs these spark plug wires on all of their Prism builds and we guarantee you won't be disappointed with the quality.

40" long
2 90° black spark plug boots
black coil boots
2 terminal ends

TC Bros Weld-On Rear Ribbed Fender Mount

TC Bros Weld-On Rear Ribbed Fender Mount

$22.00

Weld-On Rear Ribbed Fender Mount

universal fit, weld-on ribbed fender mounting bracket is constructed from a single piece of 1/4" thick American made mild steel for easy welding.

Vintage style curves and contours provide eye appeal while the 5/16" diameter mounting holes make for a simple installation. 1018Mild Steel CNC Machined bungs are provided to weld directly to your ribbed fender.

This fender bracket is most commonly used to mount ribbed fenders to a frame cross member. The straight portion of the bracket is easily trimmed to length to fit your application.

Combine this bracket with a set of our universal fender struts (SKU #104-0008) and you have a fender mounting system that will withstand the most demanding rigid frame applications. Sold individually.

Proudly made in the USA.

twelve-cell-antigravity-battery-front-view

Antigravity - AG-1201 Battery (12-Cell)

$250.00

AG-1201 Battery (12-Cell)

Small Case Lithium Battery

The AG-1201 battery has 360 Cranking Amps yet is only 4.50″ Length x 3.25″ Depth and 4.25″ Height (to the top of the terminals). This battery is a great choice for those seeking very high power in a compact battery. It can replace the typical 12 Ah lead/acid battery with a weight savings of up to 7 pounds while offering much more cranking power. This battery is best used for applications where extreme weight loss and ultra compact size are desired.

Features

Adhesive-Backed Foam Included for EASY INSTALLATION.
Most Compact of Lithium Motorsports Batteries available.
Ultra-Lightweight and High-Power Lithium-Ion Motorsport Battery.
Can hold a charge up to a year provided there are no “Parasitic Drains” (accessories that draw power when bike is off (i.e. alarms, ECUs, iPods, GPS, heated grips, etc).
Built in the USA to high quality standards.
Large all-brass terminal design.
Waterproof (Not intended for jetski use).
3-Year Warranty

Best Uses

Capable of every day use in bikes up to 1100cc (For more capacity and power use the Antigravity AG-1601).
Race and Track Day use 1500cc.
Custom builds up to 1200cc. (If using a high-performance motor use the Antigravity AG-1601).
4 Cylinder Race Cars up to 1800cc.

Prism Supply Co Glass License Plate Jewels

Prism Supply Co Glass License Plate Jewels

$30.00

Glass License Plate Jewels

These vintage style glass jewels are great for mounting your license plate or any other mounting application. They consist of a #10 mounting shaft. Sold as a pair.

Prism Supply Co DIY Electrical Kit

$132.00

DIY Electrical Kit

Not sure what to order for your electrical kit? We've got you covered! This kit is designed to wire the majority of any non-electric start choppers or cafe racers. (Wiring for an electric starter requires a larger gauge ground wire and power wire which isn't included)

If you feel like you may need an extra wire you can always purchase some of the Prism vintage cloth wire.

The electrical kit includes the following:

Tackle Box
2 x 6 in - 1/2" heat shrink
3 x 6 in - 1/4" heat shrink
3 x 6 in - 0.19" heat shrink
1 - Universal 3-Position Key Switch
10 - Male Quick Disconnect
10 - Female Quick Disconnect
10 - Butt Splice
5 - 1/4" Ring terminal
10 - #10 Ring Terminal
4 ft - 1/4" Heat Resistant Loom (fits 3 wires through it)
4 x 10ft sections of 16 gauge electrical wire (Black, White, Brown, and Green)
10 - 6" zip ties
1 - Auto Re-Setting Circuit Breaker Kit

TC Bros. Side Mount License Plate Bracket (with no light)

TC Bros. Side Mount License Plate Bracket (with no light)

$53.00

TC Bros. Side Mount License Plate Bracket (with no light)

The unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut mounting holes in the bracket. The axle mount hole is .787" diameter so this can be used on Harleys with 3/4" axles and Metric bikes with 20mm axles.

This is the most versatile bracket on the market! Your mounting options and licence plate positions can be mixed and matched to give you the unique look that you are going for.

The bracket is powdercoated gloss black and comes with stainless steel button head bolts/nuts.

Use our LED License Plate Lights/Bolts (TC Bros. #107-0037) to keep your bike legal.

This plate holder is designed for holding a license plate only (not for use with a tail light). For side mounted plate holders with tail lights, please see our other products.

Made in USA.

TC Bros-Radius Style Threaded 3/8-16 Short Length Steel Bungs by TC Bros

TC Bros-Radius Style Threaded 3/8-16 Short Length Steel Bungs by TC Bros

$22.00

Radius Style Threaded 3/8-16 Short Length Steel Bungs

Radius Style Threaded 3/8-16 Short Length Steel Bungs by TC Bros.

Save time and create professional quality mounts using these blind threaded radius bungs.

Perfect for mounting fenders or anything where you desire a clean, finished appearance.

Proudly made in the USA from premium American 1018 cold rolled steel for easy welding. 3/4" diameter x 1-1/4" long. See photos for all dimensions.

Sold in packs of 4

Motogadget Motoscope mini

$286.00

motoscope mini

The motoscope mini is a highly compact digital instrument for motorbikes.

The LED display we created for the motoscope mini is unique in the instrument realm. 251 ultra-bright LEDs provide an essentially rimless and extremely readable display surface that can entirely be used for the display of readings. This intricate and innovative technology combines a maximum of display surface with minimal casing dimensions.

The unadorned and elegant design of the motoscope mini and its high-class appearance fit every bike, trike, or four-wheel vehicle. Exposed mounting can reinforce style and looks, but it might just as well be installed more discretely and 'clean' - with the mini, everything is possible!

Casing

The high-quality aluminum casing is machined from solid metal and its surface is black anodized. The mirror-polished variant has its own appeal. Electronics come completely moulded-in and are immune to weather, water, dust, and vibrations.

Display and features

The innovative, ultra-bright 251-LED dot matrix shows the engine speed in a scalable horizontal bar graph and all other features as easily readable numeric values. With the push of a button, the engine speed can be displayed as a numerical value (rpm) as well.

For optimal readability in dark, sunlight and dawn conditions, the LED luminosity varies automatically.

Specific engine speed thresholds can be programmed for the display to show the maximum permissible engine speed ('red zone') or a gear shift light with all LEDs pulsating simultaneously.

The kicker: The display of the motoscope mini not only displays numeric values from left to right but from top to bottom as well. Thus, the instrument may also be mounted vertically!

Operation

You can toggle between the different information on the LED display by operating the provided menu push-button or e.g. the headlight flasher push-button on the handlebar.

By default, the display shows the speed value. Other values may be displayed via push-button operation if needed. A feature for automatically switching back to the speed value after a predetermined time or leaving the manually chosen value on the display is provided.

Default settings or recorded values are of course stored even with the power supply switched off.

Mounting

Due to its compact dimensions, the motoscope mini is easily mounted just about anywhere on any vehicle. Single mount on your triple clamp or right onto the handle bar, embedded into already present instrument panels, into the tank, or FBE - this instrument is applicable anywhere.

We offer universal mounts as well as brand-specific solutions e.g. for Buell or Harley-Davidson. Please refer to 'Mounting'.

Connection and sensors

Hassle-free wiring and detailed installation and operating instructions enable even users without any previous experience in handling the vehicle's electrical system to connect this instrument.

The supplied speedometer sensor in stainless steel is very small (M5/25 mm). The 1.5 m connector cable easily connects it to the front or back wheel. This permits easy conversions of originally mechanical speedometer drives.

The motoscope mini is compatible with various original speedometer sensors (reed contact and proximity sensors) used by motorbike manufacturers. In these cases, only the terminals have to be connected while the installation of mechanical sensors will be completely obsolete.

An intelligent 'teaching' function provides for easy speedometer calibration - even in cases of vehicles with sensors at the gearbox.

Parts delivered

Instrument with approx. 75 cm connector cable
Mini push-button
Removable fuse
6 cable end connectors
Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
2 powerful neodymium mini magnets
2 mounting screws M3
Detailed installation and operating instructions

TC Bros-Kickback Sissy Bar DIY Kit Short

TC Bros-Kickback Sissy Bar DIY Kit Short

$128.00

TC Bros-Kickback Sissy Bar DIY Kit

This is exactly what you need for a sissy bar that fits your bike perfectly!

Kit includes a precision CNC bent sissy bar hoop, axle plate mounting tabs, 3/8-16 threaded radius bungs, mounting bolts, and leather washers to protect your paint.

Simply trim the hoop to your desired height and weld the included tabs and bungs to the hoop. The hoop is constructed from premium 1/2" diameter 1018 cold-rolled American steel for high strength and easy welding. The threaded radius bungs allow for mounting bolts to be hidden on the underside of your fender for a professional-looking installation. Universal design is perfect for both flat or round profile rear fenders.

For some extra style, use the TC Bros Mounting Bung Kit

Proudly made in the USA

TC Bros - 8" Narrow Mini Apes Handlebars 1"

TC Bros - 8" Narrow Mini Apes Handlebars 1"

$158.00

1" Narrow Mini Apes Handlebars

Our 8" Rise Narrow Mini Ape Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. They are CNC mandrel bent for ultra-smooth bends and flawless symmetry. Knurled riser clamp locations are 3.5" on centers to fit standard Harley spacing (not springer) and prevent bars from slipping once installed. With 8" of rise and sufficient pullback, these bars are very comfortable and fit stock cables, brake lines, and wiring on most Harley models. They look great on any Harley, but especially good on Narrow glide front ends because, unlike most ape hangers on the market, the bottom of these bars are not wider than the trees.

Available in two configurations: "Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls. Dimpled bars are drilled for internal wiring.

Available in two finishes: Triple chrome plated, or durable satin black powder coat.

Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.

Does not fit throttle by wire models.

Smooth configuration bars may also be used on many Triumph models or Metric Cruisers with 1" diameter stock handlebars.

TC Bros Weld-On Rear Fender Mount

$13.00

Weld-On Rear Fender Mount for Bobbers and Choppers

universal fit, weld-on fender mounting bracket is constructed from a single piece of 1/4" thick American made mild steel for easy welding.

Vintage style curves and contours provide eye appeal while the 5/16" diameter mounting holes make for a simple installation. Leather washers are provided to prevent paint damage and provide vibration resistance. This fender bracket is most commonly used to mount flat profile fenders (4.5" minimum width) to a frame cross member. The straight portion of the bracket is easily trimmed to length to fit your application. Although this bracket is designed to best fit flat profile fenders, we have found that it works well to mount TC Bros. SKU #105-0136 rear fender because the center portion of the fender is a very large radius (nearly flat).

Combine this bracket with a set of our universal fender struts (SKU #104-0008) and you have a fender mounting system that will withstand the most demanding rigid frame applications. Sold individually.

Proudly made in the USA.

m.button

Specifications and features

mo.switch basic 3-button

Scope of delivery

Vintage Safety Glasses - Clear

mo.blaze disc

Advantages

Specifications and features

Universal Frisco Gas Tank Mounting Kit

Leather Cushion Washers with 3/8 inch Hole 10 pack

Vintage Safety Glasses - Tinted

Cloth Spark Plug Wires

Weld-On Rear Ribbed Fender Mount

AG-1201 Battery (12-Cell)

Small Case Lithium Battery

Features

Best Uses

Glass License Plate Jewels

DIY Electrical Kit

TC Bros. Side Mount License Plate Bracket (with no light)

Radius Style Threaded 3/8-16 Short Length Steel Bungs

motoscope mini

Casing

Display and features

Operation

Mounting

Connection and sensors

Parts delivered

TC Bros-Kickback Sissy Bar DIY Kit

Available in two finishes: ﻿﻿Triple chrome plated, or durable satin black powder coat.

Smooth configuration bars may also be used on many Triumph models or Metric Cruisers with 1" diameter stock handlebars.

Weld-On Rear Fender Mount for Bobbers and Choppers

Available in two finishes: Triple chrome plated, or durable satin black powder coat.