CHEMICALS

Helmet and Visor Clean

Formulated to clean the outside of the helmet

250 ml

- Neutral non-aggressive formula

- Removes oily and dry dirt without damaging the surface

- Streak-free

- Anti-insect action dissolves organic residue

- For use on all helmets

Helmet In

is an indoor helmet cleaner that removes dirt accumulated in your helmets such as perspiration or dust.

Spray the foam and let it work for 1 hour. Wipe with a cloth if necessary. Your helmet is clean and fresh.

Cable Life

Protect All Cable Life is an excellent wire/cable lubricant that cleans, purges and lubricates in seconds. It leaves a non-drying, ultra-thin film that penetrates, lubricates, displaces moisture and prevents rust and corrosion, extending cable life and reducing slop. Cable Life is formulated to work in temperature extremes from high heat and humidity to temperatures below 0° Fahrenheit. Cold weather protection makes Cable Life especially effective in protecting cables from freezing in the open position and in preventing snow and ice buildup. Over spray is not harmful to nearby surfaces or mechanisms.

Don't forget the cable luber tool

Visor Rainoff

VISOR RAINOFF is a visor cleaner with a water-repellent effect. It places a protective film on the visor allowing water to slide easily.

Spray the product on the visor, let it dry for 2 minutes and wipe with a soft cloth.

Shine and Protect

Waxing your bike just got easier! This professional grade wax makes protecting your motorcycle from UV rays, contaminants, and road grime a quick process. It also repels water and prevents dust from adhering to the surface.

7 oz.

Dry Chain  - Wax

This lubricant is the best choice to protect motorbike chains even under the most adverse conditions. It is commercialized as a spray, which simplifies its application, and ensures that the product sticks on the chain perfectly, minimizing the spillages to the rear wheel. This product incorporates PTFE additives on its formulation that maximize its water resistance and allow optimal performance even at high temperatures in any type of environment. This lubricant is especially recommended for motorbikes with o-ring chains, which require the highest performance standards. To ensure optimal results, it is recommended to decrease the chain before applying the MOTO CHAIN DRY

Qualities

•  Excellent load-carrying capacity and anti-wear and anti-corrosion properties
• High oiliness, which improves the sticking of the oil to the transmission chain and keeps the wheel clean
• Optimal friction coefficient that improves the chain wear protection thanks to the PTFE additives
• This product maximizes the lifetime of motorbike chains
• Water-proof product: its performance is optimal even in humid environments

Insect Remover

Removes splattered insects, organic residues and tar from wind screens, fairing, paint, metal and plastics.

400 ml

- Spray cleaner

- Removes traces of insect and organic residue without damaging surfaces or leaving streaks

- For use on: Windscreens, Fairings, Mirrors, Paint, Metal, and Motorcycle Ploastic

- Ready to use

Viso-Clean Individual Packets

VISO-CLEAN quickly and effectively loosens and removes dust, insects, oil residue etc. Increased safety thanks to a smudge-free, clear view. The handy little cleaning kit, which contains one wet wipe and one dry, fits in any small bag, making it perfect for use on the move.

ACF50

ACF-50, Anti-Corrosion Formula, is a state of the art, anti-corrosion lubricant compound, specifically designed for the Aerospace Industry. It is an ultra Thin Fluid Compound (TFFC) that actively treats metal using advanced polar bonding technology.

ACF-50 actively penetrates and "creeps" into the tightest seams, lap joints, micro cracks, and around rivet heads, displacing moisture and other corrosive fluids (orange juice, coke, coffee, salt water) in these corrosive prone areas. 

ACF-50's thin film acts like an "OFF SWITCH" for corrosion remaining effective for up to 24 months.

Kills and stops corrosion on contact.

Protects, Penetrates, Lubricates.

• Approved for use on all metals & electronics
• Can be sprayed on, wiped on or fogged for complete protection.
• Clear ultra thin fluid film leaves a non-greasy atmospheric barrier to protect base metal.
• Spray directly into electrical connections and compenents to prevent corrosion induced faliures.
• Chemically neutralizes the corrosive effects of road salt.
• Will not dry out or trap moisture in
• Excellent vehicle storage preparation and protection
• Remains active up to 12 months.

Tank Liner - Jumbo Kit

 Combines to create an excellent "tank within a tank"

• Cures to a tough white skin which protects the inside of the tank from rust and corrosion

• Resists leaded and unleaded gasoline, gasohol and octane boosters

• Complete kit includes tank wash, conditioner, and liner

• Includes 16-Fluid Ounce Tank Liner, 32-Fluid Ounce Tank Prep A, and 16-Fluid Ounce tank Prep B

• For tanks up to 5 gallons

Fuel Treatment

K100 Fuel Treatments are proprietary formulations of complex engineered organic compounds developed to eliminate water in fuels, remove gums and varnishes and stabilize fuel, add lubricity and corrosion protection and boost cetane/octane ratings. It's ALL- IN ONE Chemistry is all you will need to keep your engines running right.

Benefits of Using K100 Fuel Treatment

• Prevents Phase Separation in Ethanol Blended Gasoline
• Eliminates water and all water-related problems
• Stabilizes fuel for up to two years, and keeps it fresh
• Increases Octane/Cetane ratings 1 1⁄2 to 2 points
• Replaces lost lubricity in LSD, ULSD and K-1 winter blends
• Cleans engines and fuel systems for better mileage, easier starts, smoother idle, more power and better acceleration
• Reduces black smoke, unburned hydrocarbons, CO and particulate emissions
• Reduces maintenance costs and downtime and extends engine life

KREEM COMBO KIT - TANK REPAIR

Combo Includes:
1 - Pint Kreem Tank Liner
1 - Pint Part "A"
1 - .5 Pint Part "B"
 
Kreem Fuel Tank Liner is designed for use as a preventative maintenance product in metal and fiberglass tanks, new or old: containing gasoline, gasohol, or diesel. Kreem Fuel Tank Liner has a unique formulation with extremely rapid set-up, that arrests corrosion, prevents leakage from hairline cracks and seam pinholes by coating the tank’s inner surface with a fuel resistant elastomer. Kreem Fuel Tank Liner contains titanium dioxide which gives a high degree of light reflectance to aid in visual inspection of the tank’s interior during application.

With the advanced formulation of Kreem, you will receive better adhesion qualities and a smoother coating with even faster set-up time. This advance formulation has been developed and tested to withstand most octane boosters. Feel confident using gasohol in your tank with Kreem Fuel Tank Liner as methyl or ethyl alcohol have no effect on the coating.

Kreem Tank Prep is a two component system. The A-Wash will remove any grease or oil film and etch the tank’s inner surface. The B-Wash will aid in this step, plus remove any water still remaining in the tank. The B-Wash also acts as a primer for the Kreem Fuel Tank Liner, so begin the application process immediately.

Total Cycle Cleaner 1/2Ltr

• S100 Total Cycle Cleaner works by creeping to find the hidden soils you can't see, then penetrating and loosening them so a sharp stream of water can remove them
• Spray on in seconds, rinse off in seconds, and the job is done
• Can be used safely on all plastic, plated, and painted surfaces, and won't strip wax
• Sprayer with 6-foot hose accessory is available, sold separately

STA-BIL FUEL STABILIZER 8 oz.

For quick starts after storage.
Keeps fuel fresh.
1 oz. treats 2-1/2 gallons of gas or diesel fuel.Protects engine from gum, varnish, rust, corrosion.
Contains no alcohol.

S100 Wheel Cleaner

Sometimes those road wheels need some extra cleaning power to get them back to that "like new" look. And, worse yet, that brake dust (it contains metallic particles!) can become corrosive if allowed to stand for awhile. If you find that brake dust build up is hard to keep up with, we recommend you try our S100 Special Performance Gel Wheel Cleaner. It provides up to 50% more cleaning power than our Total Cycle Cleaner thanks to the clinging power of its unique gel formulation. Spray on and allow to stand, then rinse thoroughly. Neither acid, nor lye-based like cheaper products, S100 Wheel Cleaner provides complete surface safety for any type of wheel or wheel finish, including those tricky anodized finishes.

Features:

• Removes brake dust, road soils and chain lube
• Non-acid, non-lye based formula
• Safe for all wheels and coatings, even anodized
• Unique gel formulation clings for better cleaning

Polishing Soap

The perfect weapon in that fight against dulling and tarnishing for larger areas.  This just might be the world’s fastest way to polish!  Forget the slow, tedious two-finger polishing you know and step up to a handful of polishing power.  Based on a technology used by European silversmiths, this clay and soap-based polish is applied with a wet sponge (included).  Wet the sponge, drag across the Polishing Soap and scrub the surface.  Rinse with a hose or let dry and buff out.  No smelly, oily residue and a speed that will amaze you.  Pipes, fork tubes, wheels, case covers etc. get shined up in a fraction of the time it used to take.  Economical, too.  Outlasts a couple of tubes of ordinary polish.  (Not recommended for painted or anodized surfaces.). Dozens of uses around the home are described in the booklet included.

Brake Fluid DOT 4

Synthetic brake fluid designed for hydraulic systems in motorcycles that operate in severe conditions where the recommended quality level is DOT 4 or DOT 3. Guarantees maximum efficiency and the highest stability in the functioning of the brake pump.

Properties

High boiling point: above 260 ºC • Prevents foam formation. • Highly resistant to oxidation. • Compatible with joints and seals, thus preventing fluid loss risks. • Contains inhibitors that prevent corrosion of the metal components of the circuit.

Tank Mask

Forms a protective film to protect paint.

Rinses off with water!

Before you KREEM your tank, Protect the paint with Tank Mask!

No Special Equipment needed.

KREEM TANK MASK is a water-based masking liquid designed to be brushed onto painted motorcycle gas tanks and other painted surfaces where it dries to a non-tacky film that protects surfaces against KREEM’s Fuel Tank Liner and Tank Prep B. TANK MASK also traps dirt and dust under its protective film and is safe for all thoroughly cured painted surfaces.

Chrome and Aluminum Polish

• Cleans restores and polishes new and/or tarnished chrome and aluminum parts

• Does not damage chrome treated or aluminum surfaces

• Keeps chromed parts looking like new

• 100ML

Motul Perfect Seat 8.45OZ 

Powerful cleaner and restorer for all vinyl seats and saddlebags. Prevents material from drying out and cracking.

• - Non - slip formula
• - UV protection to protect from sun fading
• - Cleans restores and protects all vinyl saddles
• - Dries evenly and leaves protective dry and non-greasy sheen
• - Repels dust for long-lasting protection
• - Orange aroma

Heavy Duty Platinum 6 Speed Full Synthetic Transmission Oil

Designed by Spectro in response to complaints from Harley owners about the great but noisy new 6-speed transmission, this full synthetic provides ultimate lubrication protection. Formulated to significantly reduce gear noise and provide easier, smoother shifting, this SAE 75w140 formulation eases shifting even when cold. High loads and extreme heat do not affect the oil, so it performs well when pushed hard and long. A.P.I. GL-5 rated.