Phone Mounts

Stem Mount Short Arm Ram Mount

FEATURES

X-Grip with Touch-Claw

 The RAM-HOL-UN10-400U consists of the small Tough-Claw^™ base and universal X-Grip^® cradle for large phones and phablets. The X-Grip^® cradle has a clean and clever four-leg design that sports great holding power without hiding your smartphone behind foam pads and plastic. The X-Grip^® cradle expands and contracts for the perfect fit of most smartphones. This mount rotates 360 degrees.

X-Grip with Touch-Claw 

X-Grip Handlebar Kit for Large Phone/Phablet

• High-strength composite and stainless steel construction and powder-coated marine-grade aluminum
• Includes a 1" diameter patent rubber ball and socket system with adjustment points at both ends of the socket arm; this, with a twist of the arm knob, allows you to move the x-grip mount to the optimum viewing position
• Spring-loaded holder expands and contracts for a perfect fit to the device
• Rubber-coated tips will hold device firm and stable
• U-bolt dimensions: 0.5" x 1.25"
• Cradle is compatible with handheld devices that will fit the following dimensions: minimum width of 1.75" with a minimum height of 5.5"; Maximum width of 4.5" with a minimum height of 3.25"; depth of 0.875"

Tough Claw Mount With Level Cup Drink Holder

• High-strength composite and stainless steel mount with drink holder designed with two pivot points to keep your drink upright, regardless of conditions
• Kit includes small Tough-Claw™ base and RAM Level Cup™ Self-Leveling Drink Holder; Tough-Claw allows for tool-less removal and adjustments on any rail/tube or flat surface
• Mount rotates 360°
• Integrated eyelet and hook provide an optional tethering function to help secure any small or open container
• Clamping range on rail/tube surfaces is 0.625" to 1.5"; clamping range on flat surface is 0" to 1.14"
• Fits cans, cups, mugs, etc. ranging from 2.5" to 3.5" diameter
• 1" rubber "B" ball size
• Comes with Ram can koozie

X-Grip Replacement Tether

Replacement part for the Ram Mounts X-Grip

Post Caps

• Replacement post caps for Ram Mounts X-Grip
• Includes four rubber post caps to keep your device secure when mounted in the RAM X-Grip phone or tablet holder
• Compatible with all versions of the RAM X-Grip
• Made of rubber; super glue included

Tough-Claw with 1" Diameter Rubber Ball

• The perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars
• High-strength glass-filled nylon construction with corrosion-resistant stainless steel hardware
• Rubber pads provide stable, even gripping and protection of mounting surface
• Small  can be clamped on rails from 0.625" to 1.5" outer diameter
• Large can be clamped to rails from 1" to 2.25" outer diameter
• Ideal for mounting tablets, action cameras, smartphones and much more in a variety of applications
• Perfectly suited for mounting on the handlebars, racks and roll cages
• Made in the U.S.A.

Use with the GoPro adapter and Double Socket

1" Ball Suction Cup Base

• Made from high-strength composite and powder-coated marine-grade aluminum
• 3 1/4" twist-locking suction cup base for an extra-strong hold
• 1" rubber ball mount
• Connects to a large variety of Ram mounts and cradles

NOTE: For best results, use the suction cup on glass or other non-porous plastic surfaces

Makes a great mount for GoPro Adapter with the Double Socket Arm

Double Socket Arm for 'B' size 1" Ball

• Powder-coated marine-grade aluminum
• 1" rubber ball size "B"
• Socket at both ends
• Overall length 3.69"
• Socket-to-socket length 3"

Works with GoPro Mount , Tough Claw and Suction Cup Base

GoPro Camera Adapter

• High-strength composite construction
• Consists of 1" diameter rubber ball, connected to a custom GoPro adapter
• Patented rubber ball design dampens shock and vibration, helping to extend the life of your camera
• Multiple articulations and adjustment points for perfect viewing angles
• Attaches directly to the underside of the camera, replacing the factory mounting bracket
• Compatible with GoPro cameras including HD HERO, HD HERO 2, HD HERO 3 and HD HERO 960
• Mounts to many Ram double-socket arms and mounts such as this one (sold separately)

Camera not included

The Quad Lock Handlebar Mount Pro is the ultimate smartphone mount for motorcycles and ais compatible with all Quad Lock Cases including the Quad Lock Universal Adaptor.

SECURE MOUNTING
Our patented dual-stage lock means you can ride with confidence knowing that your smartphone will stay secure on your bike.

QUICK TO ATTACH / DETACH
Simply twist and lock in one motion to attach your smartphone to your handlebar to view GPS navigation as you ride.

SLEEK DESIGN
Don't compromise on your bike's aesthetic. The sleek design of all Quad Lock mounts seamlessly integrates onto your bike's handlebars.

Add a coloured lever to style your Quad Lock® Out Front Mount or Out Front Mount PRO to your bike.

WHAT'S INCLUDED:
HANDLEBAR MOUNT PRO
1 x Quad Lock® Index Head (with black lever)
1 x Handlebar Mount PRO Clamp
1 x Extension arm
3 x Bar spacers
1 x Allen (Hex) Key

SPECS

• Made from black anodised CNC machined aluminium
• Black stainless steel hardware
• Fits handlebar sizes 22mm (⅞”), 25mm (1”), 28mm (1-⅛”), 32mm (1-¼”), 35mm (1-⅜”) (diameter)
• 360 degree arm rotation
• Discreet cable route for USB charge cables (remove plug in upper clamp to access)
• Assembled with Black Lever

VIBRATION SOLUTION
The level of vibration from some motorcycles can affect the image stabilisation on new smartphones. The optional Quad Lock Vibration Dampener ensures you can confidently mount your smartphone to any motorcycle.

WILL I NEED ONE FOR MY SETUP?
Our research indicates that only certain motorcycle types have experienced the issue, however, our research also indicates that a number of the bikes in this same classification have had no issues whatsoever. Quad Lock recommends the use of the Vibration Dampener.

HOW DOES IT WORK?
Featuring a dual chassis suspension system with precision engineered silicone grommets, the Vibration Dampener reduces over 90% of high frequency vibrations to protect your smartphone’s camera.

PERFORMANCE TESTED BY THE BEST
Working with vibration specialists in Automotive and Defence, the Vibration Dampener was put through extreme performance testing. It was also extensively tested in real world scenarios thanks to the dedicated Quad Lock community.

The motorcycles listed have been known to cause vibration damage to the optical image stabilisation of smartphones when mounted, however, even if your bike is not listed, Quad Lock recommends the use of our Vibration Dampener for additional confidence.

Handlebar Mount

The Quad Lock Handlebar Mounts are the ultimate smartphone mounts for motorcycles and are compatible with all Quad Lock Cases including the Quad Lock Universal Adaptor.

SECURE MOUNTING

Our patented dual-stage lock means you can ride with confidence knowing that your smartphone will stay secure on your bike.

QUICK TO ATTACH / DETACH

Simply twist and lock in one motion to attach your smartphone to your handlebar to view GPS navigation as you ride.

SLEEK DESIGN

Don't compromise on your bike's aesthetic. The sleek design of all Quad Lock mounts seamlessly integrates onto your bike's handlebars. Stylise your mount with a colored lever to match your bike (optional extra).

What's Included

• 1 x Quad Lock® Index Head (with blue lever)
• 1 x Handlebar Mount Clamp
• 1 x Extension arm
• 3 x Bar spacers
• 1 x Allen (Hex) Key

Tech Specs

• Made from tough glass filled nylon
• Stainless steel hardware
• Fits handlebar sizes 22m (⅞”), 25mm (1”), 28mm (1-⅛”), 32mm (1-¼”) (diameter)
• 360 degree arm rotation

For anti-vibe protection, we suggest adding the Vibertaion Dampner

Brake Reservoir Mount

The Quad Lock® Brake Reservoir Mount is the perfect solution for mounting your phone to maxi scooters, scooters, and motorcycles' square brake fluid reservoirs.

SECURE MOUNTING

With our patented dual-stage locking mechanism, you can be confident your smartphone will stay securely attached as you ride, no matter the conditions.

The mount is attached to your scooter's brake fluid reservoir using thread-locking screws, reducing the risk of fasteners becoming loose due to thermal and/or mechanical inputs, such as vibrations.

OPTIMAL VIEWING ANGLE

The index head can be tilt adjusted, and the arm features multiple pivot points, giving you flexibility to position your smartphone in the optimal viewing angle, without interfering with any of your scooter or motorcycle's controls.

The hole pitch range suits lengths of 38mm to 70mm (1-½” to 2-¾”). The mount can be moved laterally when mounted on small brake reservoir lids, ensuring your phone will be in a position that allows full access to all controls.

SLEEK DESIGN

The Brake Reservoir Mount will look perfectly at home on your scooter or motorcycle, with it's high quality materials and understated design.

What's Included:

• 1 x Quad Lock® Brake Reservoir Mount
• 2 x M4 x 16 CSK screws
• 2 x M4 x 18 CSK screws
• 1 x combination 3mm/4mm hex (Allen) key

Tech Specs:

• Made from tough glass filled nylon
• Stainless steel pivot pins and threaded inserts
• Powder coated steel bracket
• High tensile steel fasteners with micro-encapsulated thread locker
• Mount hole pitch range from 1-½” (38mm) to 2-¾” (70mm)
• Multi-pivot arm adjustment and head tilt adjustment
• Lateral adjustment when mounted on small brake reservoir lids

VIBRATION DAMPENER

The level of vibration from some motorcycles can affect the image stabilisation on new smartphones. The Quad Lock Vibration Dampener ensures you can confidently mount your smartphone to any motorcycle.

FURTHER PROTECT YOUR SMARTPHONE

Compatible with all Quad Lock Motorcycle Mounts and Quad Lock Motorcycle Accessories, the Quad Lock Vibration Dampener reduces over 90% of high frequency vibrations produced by motorcycles.

PRECISION ENGINEERED

Featuring a dual chassis suspension system with precision engineered silicone grommets, the Vibration Dampener absorbs vibrations to protect your smartphone’s camera.

EASY TO INSTALL

The Quad Lock Vibration Dampener comes with everything you need to integrate with your existing Quad Lock Motorcycle Mount and can be installed in minutes.

Performance

PERFORMANCE TESTED BY THE BEST

Working with vibration specialists in Automotive and Defence, the Vibration Dampener was put through extreme performance testing. It was also extensively tested in real world scenarios thanks to the dedicated Quad Lock community.

The motorcycles listed have been known to cause vibration damage to the optical image stabilisation of smartphones when mounted, however, even if your bike is not listed, Quad Lock recommends the use of our Vibration Dampener for additional confidence.

Universal Adaptor

The Quad Lock® Universal Adaptors feature a secure locking mechanism compatible with all Original twist and lock mounts and can be directly adhered to phones, cases, and most flat metal or plastic surfaces.

SLIM PROFILE

At just 5mm and 5.3mm thick, the Quad Lock® Universal Adaptor fits seamlessly onto the back of smartphones and cases. 

^{Please refer to the Product Stability Guide below for more information
Please Note: Use of the Universal Adaptor may interfere with Wireless Charging}

Tech Specs

ORIGINAL UNIVERSAL ADAPTOR

• 3M™ VHB adhesive
• Slim profile (5mm thick)
• 48mm wide and 60mm tall
• Durable and tough composite construction
• Adheres to flat and slightly curved surfaces
• Compatible with Quad Lock® Original twist and lock Mounts

The Quad Lock Universal Adaptor uses a 3M™ VHB 4952 Adhesive which will adhere to smooth, non-textured, non-porous surfaces such as:

• Plastics such as PC, ABS, PVC, Nylon, Acrylic
• Non-painted metals
• Un-coated glass

The adhesive will not bond to the following substrates:

• Rubber, TPU, TPE
• Leather
• Silicone
• Hydrophobic-coated glass (Also known as anti-fingerprint glass, which is found on the back of most modern smartphones)
• Soft touch coating or paint
• Low surface energy plastics such as Polypropylene (PP), Polyethylene (PE), Acetal, HDPE
• Wood

We highly recommend using a case with the Universal Adaptor if your phone has a glass back.

Please ensure the substrate is thoroughly cleaned and dry before applying the Universal Adaptor.

The 3M™ VHB™ is a single-use adhesive and is not reusable.

MAG UNIVERSAL ADAPTOR 

Our Quad Lock MAG™ Universal Adaptor features our secure locking mechanism compatible with all twist, lock mounts and can be directly adhered to phones, cases and most flat metal or plastic surfaces.

SLIM PROFILE
At just 5.3mm thick, the Quad Lock MAG™ Universal Adaptor fits seamlessly onto the back of smartphones and cases.

QUAD LOCK MAG™
The Quad Lock MAG™ Universal Adaptor is compatible with our Quad Lock MAG™ head and Quad Lock® twist, lock mounts.

Quad Lock MAG™ makes mounting your phone even faster, simply position your phone and the magnets do the rest.

WHAT'S INCLUDED

1 x Quad Lock MAG™ Universal Adaptor
Alcohol Prep Pad

SPECS

• 3M™ VHB adhesive
• Slim profile (5.3mm thick)
• 60mm wide and 60mm tall
• Durable and tough composite construction
• Adheres to flat and slightly curved surfaces
• Compatible with Quad Lock® twist, lock mounts, heads, and accessories
• Compatible with Quad Lock MAG™ head

SURFACE GUIDELINES

The Quad Lock Universal Adaptor uses a 3M™ VHB 4952 Adhesive which will adhere to smooth, non-textured, non-porous surfaces such as:

Plastics such as PC, ABS, PVC, Nylon, Acrylic
Non-painted metals
Un-coated glass
The adhesive will not bond to the following substrates:

Rubber, TPU, TPE
Leather
Silicone
Hydrophobic coated glass (Also known as anti-fingerprint glass, which is found on the back of most modern smartphones)
Soft touch coating or paint
Low surface energy plastics such as Polypropylene (PP), Polyethylene (PE), Acetal, HDPE
Wood
We highly recommend using a case with the Universal Adaptor if your phone has a glass back.

Please ensure the substrate is thoroughly cleaned and dry before applying the Universal Adaptor.

The 3M™ VHB™ is a single use adhesive and is not reusable.

Weatherproof Wireless Charger Head USB

** Power Source Required **

Include the Wireless Charging Head with your Quad Lock® Motorcycle mounts for secure waterproof wireless charging.

FAST CHARGING CAPABILITY
Easily use GPS navigation without draining your smartphone's battery. The wireless charging heads supports fast charging when coupled with adequate power supply.

Please Note: Power output may vary depending on the phone brand and model.

SECURE MOUNTING
The dual stage lock means you can ride with confidence as your smartphone is securely mounted to your motorcycle while it charges.

WEATHER RESISTANT
Rain happens. Our Quad Lock® Wireless Charging Heads offer weatherproof dust and water resistance, enabling you to confidently journey through various conditions.

WIRELESS CHARGING HEAD COMPATIBILITY:
iPhone 15 Pro, 15 Pro Max, 15, 15 Plus, 14 Pro, 14 Pro Max, 14, 14 Plus, 13 Pro, 13 Pro Max, 13, 13 mini, SE (3rd Gen), 12 Pro, 12 Pro Max, 12, 12 mini, 11 Pro, 11 Pro Max, 11, SE (2nd Gen), X/Xs, Xs Max, XR, 8 Plus, 8
Samsung Galaxy S24 Ultra, S24+, S24, S23 FE, S23 Ultra, S23+, S23, S22 Ultra, S22+, S22, S21 FE, S21 Ultra, S21+, S21, Note20 Ultra, Note20, S20 FE, S20 Ultra, S20+, S20, Note10, Note10+, Note9, S10+, S10, S10e, S9+, S9, S8+ and S8
Google Pixel 8 Pro, 8, 7 Pro, 7, 7a, 6 Pro, 6, 5, 4, 4 XL, 3, 3 XL
Huawei P40 Pro and P30 Pro

The Wireless Charging Heads are not compatible with the Universal Adaptors

WHAT'S INCLUDED
1 x Quad Lock® Weatherproof Wireless Charging Head
1 x 50cm (20") USB-C to USB A Cable
1 x 1.5m (59") USB-C to USB-A Cable
1 x 1.2m (47") Right-Angle USB-C to USB-A Cable
1 x 3mm Hex Key
1 x M5x35 CSK Screw
5 x Nylon Zip Ties

SPECS
Compatible with all Quad Lock® Motorcycle Mounts and suitable wireless charging smartphones.

Apple devices charge wirelessly at a maximum of 7.5W.
Galaxy devices (newer than S7 and Note10) charge wirelessly at a maximum of 10W.
Pixel devices (newer than Pixel 5) charge wirelessly at a maximum of 15W.

• Dual stage lock
• Built from a combination of die cast aluminum and reinforced plastics
• 5W, 7.5W & 10W charging (iPhone up to 7.5W)
• IP66 Water Resistant
• Minimum recommended input from 5V/2A USB-A port
• LED light for status indication
• Portrait or Landscape mounting for optimal viewing
• Aluminum rear housing to dissipate heat
• CE/FCC certified
• On/Off button to power device

The Wireless Charging Heads come with an LED light to indicate the level of power your device is receiving.

QUAD LOCK MOTORCYCLE USB CHARGER

Keep your phone charged while you ride with the Quad Lock® Motorcycle USB Charger.

EASY INSTALLATION
Seamlessly integrate the Motorcycle USB Charger with any Quad Lock® Motorcycle Mount or 1" Ball Adaptor.

The Charger is neatly positioned under the Quad Lock® mount head to provide USB power without the need for long charging cables.

The 1.5m SAE connection cable and 20cm SAE to battery ring terminals give you the option to connect directly to your Battery Terminal or existing SAE Port. The charger draws zero current when not in use so there is no danger of draining your battery.

FAST CHARGING & SURGE PROTECTION
The Quad Lock® Motorcycle USB Charger supports Quick Charge 2.0 for Fast Charging. With integrated surge and polarity protection to keep your device safe from human error (also known as wrong installation).

IP66 WATER RESISTANT RATING
Unless you're taking your bike under water (which we don't recommend), the IP66 water resistant rating means there is no need for a cap to cover the USB port, no matter how heavy the rain.

Device specific charging cable and mount not included

WHAT'S INCLUDED

• Quad Lock® Motorcycle USB Charger
• 1.5m SAE connection cable and 20cm SAE to battery ring terminals

SPECS

• IP66 Water resistant housing
• IPX8 Water proof USB socket. No need for a plug.
• Quick Charge 2.0 (5V-2A, 9V-1.67A, 12V-1.5A)
• The input voltage requirement for the Moto USB is 12V - 24V DC
• Inbuilt Self Healing Poly Fuse and Surge Protection
• Polarity Protection (Prevents damage if incorrectly installed)
• 1.5m cable to SAE connector and 20cm SAE to battery ring terminals