Mounting Tabs

Leather Cushion Washers with 3/8 inch Hole 10 pack

These leather washers are perfect for protecting your paint and are more durable than rubber. The cushioning & dampening effect that these washers provide is perfect for installing between your frame and mounting tabs found on gas tanks, fenders, oil tanks, or anything else you want to protect from vibration. Also great for use under solo seat springs to prevent squeaking. Dimensions are 1 inch diameter x 3/8 inch hole x 1/8 inch thick. Sold in pack of 10 washers.

Weld-On Rear Ribbed Fender Mount

universal fit, weld-on ribbed fender mounting bracket is constructed from a single piece of 1/4" thick American made mild steel for easy welding.

Vintage style curves and contours provide eye appeal while the 5/16" diameter mounting holes make for a simple installation. 1018Mild Steel CNC Machined bungs are provided to weld directly to your ribbed fender.

This fender bracket is most commonly used to mount ribbed fenders to a frame cross member. The straight portion of the bracket is easily trimmed to length to fit your application.

Combine this bracket with a set of our universal fender struts (SKU #104-0008) and you have a fender mounting system that will withstand the most demanding rigid frame applications. Sold individually.

Proudly made in the USA.

Weld-On Rear Fender Mount for Bobbers and Choppers

universal fit, weld-on fender mounting bracket is constructed from a single piece of 1/4" thick American made mild steel for easy welding.

Vintage style curves and contours provide eye appeal while the 5/16" diameter mounting holes make for a simple installation. Leather washers are provided to prevent paint damage and provide vibration resistance. This fender bracket is most commonly used to mount flat profile fenders (4.5" minimum width) to a frame cross member. The straight portion of the bracket is easily trimmed to length to fit your application. Although this bracket is designed to best fit flat profile fenders, we have found that it works well to mount TC Bros. SKU #105-0136 rear fender because the center portion of the fender is a very large radius (nearly flat).

Combine this bracket with a set of our universal fender struts (SKU #104-0008) and you have a fender mounting system that will withstand the most demanding rigid frame applications. Sold individually.

Proudly made in the USA.

Mounting Tab Style 2

CNC laser cut from 1/4" thick American-made mild steel for easy welding.

Heavy-duty design performs under the most demanding rigid frame applications. 5/16" diameter hole works perfectly with 5/16" hardware and is the proper size for you to tap to 3/8-16 if a threaded hole is needed. Save yourself a lot of time on your build by using these tabs to mount almost anything.

Sold in packs of 4.

Proudly made in the USA.

Weld-On Steel Mounting Tabs Style 1

Tab Style #1. CNC laser cut from 1/4" thick American made mild steel for easy welding.

Heavy-duty design performs under the most demanding rigid frame applications. 5/16" diameter hole works perfectly with 5/16" hardware and is the proper size for you to tap to 3/8-16 if a threaded hole is needed.
Save yourself a lot of time on your build by using these tabs to mount almost anything.

Sold in packs of 4.

Proudly made in the USA by TC Bros.

Weld-On Steel Mounting Tabs Vintage Style 10

Tab Style #10. CNC laser cut from 1/4" thick American-made mild steel for easy welding.

Heavy-duty design performs under the most demanding rigid frame applications. 5/16" diameter hole works perfectly with 5/16" hardware and is the proper size for you to tap to 3/8-16 if a threaded hole is needed. Tab is coped to fit perfectly to 1-1/8" diameter frame tubing but is a very easy fit to both 1" and 1-1/4" diameter as well. Save yourself a lot of time on your build by using these tabs to mount almost anything.

Sold in packs of 4.

Proudly made in the USA.

Weld-On Steel Mounting Tab Style 5

Tab Style #5. CNC laser cut from 1/4" thick American made mild steel for easy welding.

Heavy-duty design performs under the most demanding rigid frame applications. 5/16" width slot works perfectly with 5/16" hardware and allows for additional adjustment of components. Save yourself a lot of time on your build by using these tabs to mount almost anything.

Sold in packs of 4.

Proudly made in the USA.

Universal Frisco Gas Tank Mounting Kit

 Includes 3/8"-16 Stainless steel button head bolts, 1018 mild steel tophat bungs, leather cushion washers, stainless steel washers.

Heavy Duty Oil Tank Mounting Kit

Use this kit to mount TC Bros. Oil Tanks to our Sportster Hardtail.

Can also be used for universal applications. Made in USA

Heavy Duty Rubber Mounting Triangular Tab

TC Bros. universal fit, weld-on rubber mounting tabs are CNC laser cut from 1/4" thick American made mild steel for easy welding.

The CNC machined, 6061 aluminum tophat style spacer and military spec rubber grommet perform under the most demanding rigid frame applications. Included 5/16"-18 x 1" stainless steel button head mounting bolt looks great and is very corrosion resistant.

These tabs save you a lot of time on your build and provide you with professional quality results. Perfect for mounting oil tanks, gas tanks, or any other component that can be easily damaged by excessive vibration. Sold individually.

Proudly made in the USA. (SOLD EACH)

Heavy Duty Gas Tank Rubber Mounting Kit

The TC Bros. universal fit, weld-on gas tank rubber mounting tabs kit is CNC laser cut from 1/4" thick American made mild steel for easy welding.

The CNC machined, 6061 aluminum tophat style spacers and military spec rubber grommets perform under the most demanding rigid frame applications. Included 5/16"-18 x 1" stainless steel button head mounting bolts look great and are very corrosion resistant.

Commonly used with "Frisco" style fuel tanks, these tabs save you a lot of time on your build while providing you with professional quality results. To install, simply weld the tabs to the backbone of your motorcycle frame, insert the rubber grommets and tophat spacers, then the bolts pass through the tophats and thread into the mounting bungs located on the bottom of your fuel tank (not included).

Rigid Solo and Cobra Seat Mounting Kit

Everything you need to mount your TC Bros. Rigid Solo or Cobra Seat. The weld-on bracket is coped to fit our Sportster hardtail perfectly. Mounts are slotted if you want to use this for a universal/custom use.

King & Queen Seat Mounting Kit

Everything you need to mount your TC Bros. King & Queen Seat. Weld-on bracket is coped to fit our Sportster hardtail perfectly. Mounts are slotted if you want to use this for a universal/custom use.

Weld-On License Plate Bracket

The good folks over at Prism Supply Co have designed a license plate bracket to work with any new or vintage license plate.  It's perfect for that sissy bar application. Comes in either stainless or mild steel with a thickness of 8 gauge or 0.1285".

Don't forget a set of Glass License Plate Jewels for that vintage custom look! 

Weld On Brake Stay Mounting Tab

TC Bros. universal fit, weld-on brake stay mounting tabs are CNC laser cut from 1/4" thick American-made mild steel for easy welding.

Vintage style curves and contours provide eye appeal while the 3/8" diameter hole makes for easy attachment of your brake anchor rod end. This heavy-duty tab design stands up to the most demanding rigid frame applications and can be used to mount almost anything you can dream of.

Sold individually.

Proudly made in the USA.

Weld-On Steel Mounting Tab Style 9

Tab Style #9 (Vintage). Similar construction to our standard mounting tabs but with more curves and contours for a vintage look. CNC laser cut from 1/4" thick American-made mild steel for easy welding.

Heavy-duty design performs under the most demanding rigid frame applications. 5/16" width slot works perfectly with 5/16" hardware and allows for additional adjustment of components. Save yourself a lot of time on your build by using these tabs to mount almost anything.

Sold in packs of 4.

Proudly made in the USA.

Weld-On Steel Mounting Tab Style 4

Tab Style #4. CNC laser cut from 1/4" thick American-made mild steel for easy welding.

Heavy-duty design performs under the most demanding rigid frame applications. 5/16" width slot works perfectly with 5/16" hardware and allows for additional adjustment of components. Save yourself a lot of time on your build by using these tabs to mount almost anything.

Sold in packs of 4.

Proudly made in the USA.

Weld-On Steel Mounting Tab Style 6 

Tab Style #6 (Vintage). Similar construction to our standard mounting tabs but with more curves and contours for a vintage look. CNC laser cut from 1/4" thick American-made mild steel for easy welding.

Heavy-duty design performs under the most demanding rigid frame applications. 5/16" diameter hole works perfectly with 5/16" hardware and is the proper size for you to tap to 3/8-16 if a threaded hole is needed. Save yourself a lot of time on your build by using these tabs to mount almost anything.

Sold in packs of 4.

Proudly made in the USA.

Single Sided Weld On Chain Tensioner - Skate Wheel (Powell Peralta)

-Ready to weld on to your frame!
-Universal to any chain size or belt drive.
-Raw mild steel for easy welding
-Tig Welded
- The spring is hand wound stainless steel for unsurpassed tension.

This tensioner is used to keep the chain tight automatically which avoids chain slap which can cause drive issues as well as damage to fenders and frames.