AG-401 Battery (4-Cell)

AG-1201 Battery (12-Cell)

AG-1601 Battery (16-Cell)

8-Cell Aluminum Battery Tray

This ultra-lightweight Antigravity Battery Tray (the BT-02 model) is custom designed for holding the Small Case AG-801 or AG-802 (6-Volt) batteries.

It’s the perfect Battery Box for Custom Bikes, Performance/Race Cars, and other applications where you want to mount your Small Case 8-Cell Battery. These offer a very cool look and are extremely lightweight with an all-Aluminum frame.

• Quick and Easy installation.
• Strong Welded, Unpolished Aluminum Battery Tray.
• Fits the 8-Cell “Small Case” Antigravity battery AG-801
• Comes with  Battery Tray and Hardware.

8-Cell Battery Box

This is a battery box designed and made here in the USA by LC Fabrications, specifically for the Antigravity Battery 8-Cell Models (AG-801 and the 6V AG-802). Perfect for applications such as Custom Bikes, Race Cars, Performance Street Cars or anywhere you can think of where you need to secure your Antigravity Small Case battery in a secure and great-looking battery mount. They are also offered in sizes for all our other Antigravity Small Case models.

These LC Fabrications Battery Boxes are made from 6061 aluminum and polished to perfection in the USA (Virginia). They come with all the hardware needed to mount and secure your battery.

Assembled dimensions are approx 4.5L x 2.5W x 3.25H and it weighs just about 1 lb.

These LC Fabrication Battery Boxes are the first choice for Custom Builders or Performance Cars that use Antigravity Batteries. Other models are available for all Antigravity Batteries Small Case Models.

• Easy installation and great-looking design.
• Lightweight, polished Aluminum with all hardware included (battery not included).
• Fits the 8-Cell “Small Case” Antigravity Batteries: AG-801

Bolt-On Battery Box - Honda Shadow VT600 VLX - Fits 8 Cell Antigravity Battery

This bolt-on battery box for the AG801 small case 8 cell Antigravity battery is the perfect fit for your Honda Shadow bobber build! You can bolt these on anywhere they will fit on your bike! Made of .125" (1/8") thick steel, this battery box is built for a long life. Two drain holes in the bottom ensure that any moisture that's collected can get out. I know many of you Shadow owners don't have access to a welder, but almost anyone can get their hands on a simple drill and some bolts!

Specs:

• 1.25" thick mild steel 
• Approx 4.5" Length x 2.5" Width x 3.75" Height
• 3/8" mounting holes
• drain holes

This battery box will work great if you are getting rid of all your stock electronics and using one of the TJ Brutal Bolt-on E Tanks!! The battery box easily bolts in by drilling 2 holes in the forward tube of your swingarm, all the way towards the right side of the bike, away from the chain. Then attaching the box with 2X 3/8"-16 bolts. Be sure to use loc-tite or locking agent on the threads. 

This fits a Honda VLX VT600 88-07 but may fit other bikes. For other bikes, you would need to check the specs for fitment compatibility.

Antigravity 8-Cell Battery Box Approx- 4.5" Length x 2.5" Width x 3.75" Height approx (to the top of the terminals). This box is for the Antigravity 8-cell small case batteries, not for OEM batteries.

Small Case 4-Cell Battery Tray

This ultra-lightweight Antigravity Battery Tray (the BT-01 model) fits the Small Case AG-401 and SC-1 batteries.

Custom-designed battery box for holding your Antigravity Battery. It’s perfect for Custom Bikes, Performance Cars, and other applications where you want to mount your Small Case Antigravity Battery. These offer a very cool look and are extremely lightweight with an all-Aluminum frame.

• Quick and Easy installation.
• Strong Welded, Unpolished Aluminum Battery Tray.
• Fits 4-Cell “Small Case” Antigravity Batteries Found here

Optimate 4 Quad Program

OptiMate 4 Quad Program is the ultimate battery charger for the high technology 12V/12.8V battery in your adventure, touring, cruiser or performance motorcycle, or ATV, Side by Side and personal watercraft – the most advanced power-sport battery charger!

OptiMate 4 Quad Program tests before & after charging and can recover a 'dead-flat' lead-acid & lithium (LiFePO4) battery from as low as 0.5 Volts.

Features:

• Ideal for: AGM, GEL & STD 12V batteries from 4 – 60Ah & Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 15Ah
• Charging Amps: 1.25A (constant current)
• Charging Volts: nominal: 12V & 12.8V range: 0.5V – 14.4V
• Operation: Selectable, 4 charge programs
• 12V: 1) Smart desulphation: 0.5V - 14.4V 2) BMW CAN-bus compatible: 5V - 14.4V
• 12.8V: 3) Low Volt Recovery: 0.5V - 14.4V 4) BMW CAN-bus compatible: 8.8V - 14.4V
• Use: Indoor/Outdoor (lowest temperature: -40°F/-40°C)
• Input: Global (100-240V 50-60Hz), high efficiency (CEC listed)
• Style: Weatherproof case with wall mounts, with 6 ft/180 cm AC supply lead and 6 ft/180 cm charge lead ending in SAE connector
• Save: Low Volt Start of 0.5V + 2-step desulphation recovery ( 1-step low volt pulse save during CAN-bus mode)
• Safe: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected

Optimate 4 Quad Program - Premium Edition

SILVER series: 8-step 6V 4A / 12V 3A sealed battery saving charger & maintainer

OptiMate 5 6V/12V the smarter charger for all 6V and 12V lead-acid batteries – great for deep cycle batteries!

Fully automatic multi-step program brings the battery safely to full charge – Connect to the battery and OptiMate 5 6V/12V does the rest, no supervision required!

MORE FEATURES:

Automatically adjusts current to match battery size and condition.

Safe to leave connected. Full electronic protection.

Maintains battery at full charge and good health.

Saves your ‘dead’ battery from as low as 0.5V.

Tests battery state of health.

Voltage safety check: will not charge if battery voltage does not match selection. Requires user confirmation.

Energy saving technology. √ Stand-by power less than 0.5W. √ Efficient 24-7 battery maintenance.

Weatherproof. Rated for use down to -40°C / -40°

IDEAL FOR: STD, AGM, GEL, SLI & DEEP CYCLE 6 & 12V batteries from 3 – 120Ah (up to 160Ah for 6V).

CHARGING AMPS: 4A (6V) / 3A (12V) (Ampmatic)

CHARGING VOLTS: 6V range: 0.5V – 7.2V; 12V range: 8V (0.5V*) – 14.4V

*Voltage safety check. Will not charge if battery voltage does not match selected voltage. User must confirm it is a low volt 12V battery > press selection button for 3 seconds to confirm > then lowest charge voltage for 12V is reduced to 0.5V.

OPERATION: Selectable

STEPS: 8

FEATURES: SAVE & CHARGE all 6V & 12V lead-acid batteries.

USE: Indoor / Outdoor  (lowest temperature: -40°F / -40°C).

INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).

STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.

SAVE : Low Volt Start of 0.5V + 2 step desulphation recovery.

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

INCLUDED: weatherproof battery lead & battery clip set.

WARRANTY: 3-year limited replacement warranty.

LITHIUM series: 8-step 12.8V 0.8A sealed battery saving charger & maintainer

OptiMate Lithium 4s 0.8A, the essential battery charger for the 12.8V/13.2V LiFeP04 / LFP in your off-road, moto-cross, or race motorcycle – Ultimate protection for your high-performance Lithium battery.

• OptiMate Lithium is recommended by Honda, Yamaha, Kawasaki, KTM, and Husqvarna and global Lithium battery manufacturers Anti-gravity, Super-B, and Earth-X.
• Automatically charge, test and maintain your 12.8V / 13.2V LiFePO4 / LFP starter or deep cycle batteries – Battery performance guaranteed!
• If you forgot, saves your lithium battery from as low as 0.5V with the unique and safe OptiMate Lithium method – Continues charging if healthy, stops, and warns if faulty!
• BMS wake-up mode safely wakes battery with integrated BMS protection out of sleep mode.
• OptiMate Lithium 24-7 smart inter-active maintenance prevents discharge from connected circuitry & guarantees more battery power, longer battery life!

IDEAL FOR: Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 30Ah

CHARGING AMPS: 0.8A (constant current)

CHARGING VOLTS: nominal: 12.8V range: 0.5V – 14.4V

OPERATION:  Fully automatic

STEPS: 8

FEATURES: Saves low voltage LiFePO4 batteries. Specialized LiFePO4 charge cycle. Maintains & protects LiFePO4 batteries

USE: Indoor / Outdoor (lowest temperature: -4°F / -20°C).

INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).

STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.

SAVE : Low Volt Start of 0.5V + 3 step low volt save & test.

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

INCLUDED: weatherproof battery lead & battery clip set.

WARRANTY: 3-year limited replacement warranty.

USB 0-108 V2

• Low input (12.3V) auto-off protects vehicle battery from total discharge. Supply range: 12.3 to 16Vdc
• 12V power through an industry standard SAE 2-pin connector
• Short circuit, overheat, over-voltage protection
• Apple 1A charge confirmation ‘handshake’ built in

P5 Advanced Smart Pump With Integrated Battery Pack

The New P5 Advanced Smart Tire pump system was designed after collecting feedback from our Gen 1 Smart Pumps. Motorcycle tire pressure is a key component for any ride, on or off-road, the P5 will keep your tires dialed in any environment. 

The P5 features a 5000 MaH Lithium Ion Cell, Internal Cooling fan, Heat and Abrasion protected threaded filling Trachea, digital pressure monitoring, 2-150PSI digitally adjustable pressure settings, and a USB-A Output for mobile device charging on the go. 

The P5 is backed by Lexin's standard two-year hassle-free warranty and is a must-have item for any Moto or wheeled Powersports applications. 

The smart tire pump system REQUIRES to be fully charged before FIRST USE.

UNIT SPECS

- 2-150PSI Digitally adjustable pressure settings

- 5000 MaH battery 

- USB-A Output for mobile device 

XP-1 Micro-Start (Gen 2)

The Micro-Start XP-1 has an ALL-NEW design! The second generation XP-1 is upgraded with super fast USB-C PD30w Charging and other great features. The XP-1 was one of the first mini lithium jump-starters on the market and is considered the industry standard in its class

• Jump-Start cars, trucks, motorcycles, powersports vehicles, more
• Charge Phones, Tablets, Laptops and other USB devices (Apple or Windows)
• Type-C USB IN/OUT and Type A QC USB Out
• Type-C PD 30w Super Fast Charging (2 hr recharge)
• 400A starting current / 2000A peak
• 12,000 mAh capacity (44.4 Wh)
• LED Flashlight built-in
• 6.9 x 3.7 x 1.4 inches (176x95x35 mm)
• Carry Case and Accessories included

The next generation MICRO-START XP-1 is here! Our XP-1 jump-starter/ personal power supply (PPS) was Winner of the SEMA New Products Award in 2013 – it was the First and ORIGINAL mini jump box and continues to evolve. Now we have raised the bar bigtime with a NEW sleek design, higher jump-starting Power, and great features like a large Digital Display plus the new and super fast PD 30w USB Type-C Charging/Recharging so the XP-1 can power or fast charge all your modern Electronics like Phones, Tablets and Laptops. Take Portable Power and the ability to Jump Start your vehicles wherever you go. Take us on your next adventure!