Foot Controls & Pegs

Bolt-On Pegs

These are made for 1"  1-1/8" or 1-1/4"  hardtail frames.  They come powder-coated black. Sold as a pair.  Can be used for either highway pegs or passenger pegs. Bolt-on and go!

Holey Shifter Pegs & Brake Pegs - Honda Shadow

Made with the Honda Shadow in mind but will fit many other motorcycles!

Specs:

• 2.25" long
• 7/8" Diameter
• Includes mounting bolt 
• Pegs are sold individually. For a set of pegs, purchase a quantity of two when you checkout. 

To install on a Honda Shadow, you will need to cut off the existing shifter or brake peg and drill a 8mm hole in the shifter arm. Then use the included bolt to bolt the peg on. Make sure you use Loc-tite on the bolt threads!

With a drill and a hacksaw this whole process takes about 10 minutes tops. A cutoff wheel in an angle grinder makes the whole process a lot faster. Don't chop off your fingers!

Aluminum pegs are crafted from 6061A aircraft grade Aluminum and the black pegs are Anodized. 

Brass pegs are crafted from C 36000 machinable Brass

Some models may require more fabrication to fit. 

Sold Each. Not in pairs.

This is for the purchase of a peg only. The video is for example purposes and shows other pieces which are not included

THE BLACK BOX - Complete Controls Kit

THE BLACK BOX is a Complete Controls Kit that includes our Grips, Pegs, Shifter, Brake Peg, Throttle Assembly & Carb Shield

Experience the ultimate in black parts with the TJBC BLACK BOX. Whether you're looking for a fully murdered-out build or just want to add some darkness to your bike, this curated box has you covered. Indulge with the finest ALL BLACK parts.

Each Black Box Includes:

• QTY 1: The Acerus - Single Cable Throttle Assembly For Honda Shadow - Black
• QTY 1 Set: The Malleus Machined Throttle Sleeve and Clutch Grips - 1" Bars - Black
• QTY 1: Holey Shifter Peg - Anodized Black
• QTY 1: Holey Brake Peg - Anodized Black
• QTY 1 Set: Holey Footpegs - Black 
• QTY 1: Fortis Crucem Carb Shield - Honda Shadow VT600 VLX600 VT750 - Black

Jockey Shifter and Suicide Clutch Kit - VT600 - All Years

The BOLT-ON Jockey Shifter and Suicide Clutch Kit for the Honda Shadow VT600, VLX600 is the first of its kind to be produced for the Honda Shadow motorcycle! 

Fits:

• Honda Shadow VT600 1988 - 2007

The Jockey Shift and Suicide Clutch Kit for bobbers and choppers is a breeze to install, requiring zero fabrication, you will only need a few wrenches, and some allen/hex keys to get your bike rolling!  The Aluminum Shift knob is threaded at 3/8-16".  This is an amazing upgrade for your Honda Shadow!

You can use your stock clutch cable or pick up a 2" shorter clutch cable! The kit will come partially assembled, you will need to use Loctite and adjust everything before you ride. Tighten the Jockey Shift set screws down tightly!

Each Suicide Clutch Kit will include a replacement forward engine mount bolt and 3 stainless cap head screws to bolt the clutch backing plate to your stator case! Jockey Shifters will include the adapter, arm, hardware, and TJ Brutal Customs aluminum shift knob which threads onto the shifter arm.

**Note:  Please use loc-tite on all threads before riding. For case, bolts use anti- seize**

The Suicide Clutch Kit DOES NOT fit the VT750, however, the Jockey Shifter arm will.

Check out the video for a simple step-by-step install!

Pro Series Gold MX Lite Foot Pegs

TC Bros. Pro Series MX Lite Foot Pegs were designed with the high performance Harley Davidson rider in mind. Inspired by the off-road racing world and refined for the ultimate on-road experience, these pegs provide a high traction and stability. Precision machined right here in the USA from the highest quality materials, these foot pegs are extremely strong and lightweight. Providing 360 degree adjustability and a design that increases the lean angle of your motorcycle, the attention to detail on these is second to none. 

Features:

• Exclusive taper locking foot peg mounts hold securely without slippage, yet are 360 degree adjustable to provide a perfect angle to fit your bike and foot. 
• CNC machined from strong and lightweight 6061-T6 aircraft grade aluminum. 
• Replaceable stainless steel cleats will not rust and are specifically machined to provide the proper amount of traction for motorcycle footwear.
• 3.375" long x 1.375" wide surface provides excellent stability without sacrificing lean angle. 
• Black anodized finish for great looks and corrosion resistance (other finishes available). 
  
• Proudly made in the USA.
• Pegs install using basic hand tools.
• Replacement parts and tech support after the sale.

Fitment

• Kit includes 3/8" male style foot peg mounts that fit many popular 1984-newer Harley Davidson models including Dyna, FXR, Softail (excluding 2018-newer), and Sportster models (excluding 2011-newer XL1200C "Custom", XL1200CP "Custom Program", and XL1200X "Forty Eight", 2012-newer XL1200V "Seventy Two, 2016-newer XL1200CX "Roadster, 2018-newer XL1200XS "Forty Eight Special", and all water cooled "Revolution Max" engine models).
• Does not fit Pan America models.
• More fitments are available in other kits. 

Pro Series Black MX Lite Foot Pegs

TC Bros. Pro Series MX Lite Foot Pegs were designed with the high performance Harley Davidson rider in mind. Inspired by the off-road racing world and refined for the ultimate on-road experience, these pegs provide a high traction and stability. Precision machined right here in the USA from the highest quality materials, these foot pegs are extremely strong and lightweight. Providing 360 degree adjustability and a design that increases the lean angle of your motorcycle, the attention to detail on these is second to none. 

Features:

• Exclusive taper locking foot peg mounts hold securely without slippage, yet are 360 degree adjustable to provide a perfect angle to fit your bike and foot. 
• CNC machined from strong and lightweight 6061-T6 aircraft grade aluminum. 
• Replaceable stainless steel cleats will not rust and are specifically machined to provide the proper amount of traction for motorcycle footwear.
• 3.375" long x 1.375" wide surface provides excellent stability without sacrificing lean angle. 
• Black anodized finish for great looks and corrosion resistance (other finishes available). 
  
• Proudly made in the USA.
• Pegs install using basic hand tools.
• Replacement parts and tech support after the sale.

Fitment

• Kit includes 3/8" male style foot peg mounts that fit many popular 1984-newer Harley Davidson models including Dyna, FXR, Softail (excluding 2018-newer), and Sportster models (excluding 2011-newer XL1200C "Custom", XL1200CP "Custom Program", and XL1200X "Forty Eight", 2012-newer XL1200V "Seventy Two, 2016-newer XL1200CX "Roadster, 2018-newer XL1200XS "Forty Eight Special", and all water cooled "Revolution Max" engine models).
• Does not fit Pan America models.
• More fitments are available in other kits. 

Pro Series MX Style Shifter Peg - Black

TC Bros. Pro Series MX Shifter Peg (sold each) is designed with the high-performance Harley Davidson rider in mind. Inspired by the off-road racing world and refined for the ultimate on-road experience, this peg provides high traction and stability. Precision machined right here in the USA from the highest quality materials, this shift peg is extremely strong and lightweight. Providing 360-degree adjustability and a design that perfectly complements a set of our Pro Series MX or MX Lite foot pegs, these pegs also work very well as both a shifter peg and a brake pedal on our Pro Series mid controls kits.

Features:

• 360-degree adjustable to provide a perfect angle to fit your bike and foot. 
• CNC machined from strong and lightweight 6061-T6 aircraft-grade aluminum. 
• Replaceable stainless steel cleats will not rust and are specifically machined to provide the proper amount of traction for motorcycle footwear.
• 2" long x 1" wide surface provides excellent engagement, while the large radius profile on the underside prevents tearing up the toe surface of your footwear while upshifting.
• Black anodized finish for great looks and corrosion resistance (other finishes available). 
  
• Proudly made in the USA.
• Peg installs using basic hand tools.
• Replacement parts and tech support after the sale.

Fitment:

• Peg includes 5/16-24 socket head mounting hardware that fits OEM shifters on most Harley Davidson models including Dyna, FXR, Softail, Touring, and Sportster models (excluding water cooled "Revolution Max" engine models). 
• Compatible with TC Bros. brand mid controls and forward controls kits. Note that these are sold each, and 2 would be required for any TC Bros. brand foot controls kits.

Yamaha XS650 Forward Controls Kit

bolt-on forward controls kit for all years/models of the Yamaha XS650 from 1970-1983. These work great for custom choppers, bobbers, or even stock bikes!

Features:

• CNC machined 6061 aluminum foot pegs with non-slip knurled finish.
• Precision fit bronze bushing pivots.
• TIG welded mounting brackets with durable black powdercoat finish.
• Proudly made in the USA.
• Detailed mounting instructions and hardware included.
• Foot position is extended compared to OEM for an all around, comfortable ride.
• Replacement parts and tech support after the sale.
• Linkage Kits available separately.

Dyna Mid Controls Kit Fits

Customize and upgrade the look and feel of your Harley Davidson Dyna with a high quality USA Made bolt on mid controls kit from TC Bros. Designed to fit all 1991-2017 Dyna Models (see fitment notes below). These controls not only look great, but are much higher performing than factory mid controls. The foot peg position is slightly higher and much closer to the engine, providing for increased lean angle before the pegs will contact the pavement. Detailed mounting instructions & quality hardware included to ensure trouble-free installation. 

Features:

• Footpeg locations allow for greater lean angle.
• CNC machined 6061 aluminum folding foot pegs with non-slip knurled finish. 
• Precision fit bronze bushing pivots for smooth operation.
• Investment cast steel mounting brackets for rigidity.
• Durable black powdercoat finish.
• Proudly made in the USA.
• Detailed mounting instructions and hardware included.
• CNC Machined, stainless steel brake linkage rod.
• Replacement parts and tech support after the sale.

Fitment Notes:

• Kit includes everything required to install on a 1991-2017 Dyna that came with factory Harley mid controls. If you have a model that came with factory forward controls, additional hardware is required for install. Cost and difficulty varies greatly depending on year & model. For example, 2006-2017 forward controls models are most costly to convert because they require removal/installation of inner and outer primary. Please see table in the install instructions for the list of additional hardware needed before purchase. 

Loaded Gun Custom Yamaha XS650 Rearsets

Loaded Gun Customs ultra lightweight, high performance XS650 bolt on rearsets by TC Bros.

This kit fits all Yamaha XS650 motorcycles from 1974-1983. Kevin from Loaded Gun Customs teamed up with TC Bros. to produce the best rearsets for your money. The rearsets are made from lightweight aluminum making the whole kit weigh only 2lbs 14oz.

Kit includes a pair of rear sets featuring CNC machined 6061 aluminum pegs with oil impregnated bronze bushings, as well as CNC machined aluminum mounting brackets. Linkage rods with heim joints and mounting hardware are also included. The pegs are knurled for increased grip. The mounting plates bolt to your stock footpeg mounts. Everything bolts on with no frame modifications. Mounting instructions with pictures are included.

The stock kickstart lever must be heated and bent to clear the brake pedal. The stock brake pedal and stock shifter must be cut and a hole drilled in them to attach linkage to. Everything is explained in the included instructions. This is a very easy mod to do to your Yamaha XS 650 and is perfect for cafe racers.

Sportster Mid Controls Kit for 91-03 5 Speed

Customize and upgrade the look and feel of your Harley Sportster with a high quality USA Made bolt on mid controls kit from TC Bros. Designed to fit all 883 and 1200 Sportster 5-speed models produced from 1991-2003. These controls feature classic lines and timeless good looks. Detailed mounting instructions & quality hardware included to ensure trouble-free installation.

Features:

• CNC machined 6061 aluminum folding foot pegs with non-slip knurled finish.
• Precision fit bronze bushing pivots.
• TIG welded mounting brackets with durable black powdercoat finish.
• Proudly made in the USA.
• Detailed mounting instructions and hardware included.
• Foot position is the same as a set of OEM Harley mid controls for an all around, comfortable ride.
• Replacement parts and tech support after the sale.

TC Bros. Sportster Forward Controls Kit for 91-03 5 Speed

Customize and upgrade the look and feel of your Harley Sportster with a high quality USA Made bolt on forward controls kit from TC Bros. Designed to fit all 883 and 1200 Sportster 5-speed models produced from 1991-2003. These controls feature classic lines and timeless good looks. Detailed mounting instructions, quality hardware, and stainless steel linkage rods ensure trouble-free installation.

Features:

• CNC machined 6061 aluminum folding foot pegs with non-slip knurled finish
• Precision fit bronze bushing pivots
• Stainless steel linkage rods
• TIG welded mounting brackets with durable black powdercoat finish
• Proudly made in the USA
• Detailed mounting instructions
• Foot position is the same as a set of OEM Harley forward controls for an all around, comfortable ride.
• Replacement parts and tech support after the sale

Sportster Forward Controls Kit for 04-13

Choppers bolt on forward controls kit to fit all 883 and 1200 models of Harley Davidson Sportster from 2004-2013 is proudly made in the USA.

Kit features CNC machined 6061 aluminum folding footpegs with a knurled, non slip finish for great looks and performance. Heavy duty steel mounting brackets are TIG welded and powdercoated satin black for durability. Stainless steel linkage rods provide smooth shifting and corrosion resistance. Highly detailed mounting instructions allow for simple installation. Kit includes everything you need to bolt these to your Sportster, whether it came with factory mid controls or factory forward controls. All pivot points utilize oil impregnated, precision fit bronze bushings for long life. Foot position is the same as a set of OEM Harley forward controls for an all around, comfortable ride.

Honda Shadow ACE 750 Forward Controls Extension Kit 1998-2003 VT750

This kit is manufactured right here in the USA and is in stock and ready for immediate shipment to your door. This kit is designed to relocate your stock Honda forward controls 7.5” forward of the stock location (recommended for riders with a minimum 31” inseam). If your stock controls feel too close to you and you are looking to increase riding comfort, especially on long trips, then this is the kit for you.

Don’t be fooled by cheaper, flimsy made forward controls extension kits that flex under your feet, especially when applying the rear brake. This kit features 1/2” thick CNC Machined 6061-T6 Billet Aluminum mounting brackets, and a solid 3/4” diameter 6061-T6 Aluminum cross brace that ties both mounting brackets together for an ultra-rigid kit. The one-piece 5/16” diameter shift rod is stainless steel so it will never rust, as well as all of the supplied mounting hardware (bolts, nuts, washers, etc.). The rigid one-piece welded brake rod and all of the mounting brackets are powdercoated gloss black for a very durable finish that requires very little maintenance. The gloss black color matches your stock frame color very nicely for a professional-looking install.

Full Installation Instructions, as well as 3D exploded parts diagram, makes 100% bolt-on installation very simple with common hand tools. Product is professionally retail packed to ensure safe arrival to you without damage/scratches.

Technical support provided before and after the sale if needed from TC Bros Choppers M-F 8am-5pm EST.

With stainless hardware, rigid cross brace, one-piece shift and brake rods, high gloss powdercoat finish, and the best install instructions/technical support in the industry, you will not find a nicer extensions kit anywhere.

Universal Linkage Kit

Universal Linkage Kit for all TC Bros. metric forward control and rearset kits. The rods/tubes will need to be cut to fit your application.

Kit Includes:

• Two 24'' Long 5/16" Threaded Rods
• Four 5/16" Ball Joints
• Two 5/16" ID x 1/2" OD Steel Tubes* (to cover rod threads and increase rigidity)
• Eight 5/16" Jam Nuts
• Four Nylock Nuts 
• Four Flat Washers

Brake Pivot For Forward Control Linkage

universal brake pivot kit for connecting forward control linkage to drum brake linkage.

Kit includes: weld on raw steel mount with threaded holes that is coped to fit your frame tubing. After welding the mount to your frame you can then bolt the brake pivot to the mount.

Brake pivot is totally serviceable with replaceable oil impregnated bronze bushings. Pivot is powdercoated gloss black for a super durable finish. Kit also includes one raw steel return spring mounting tab and a return spring.

Sportster Mid Controls Kit for 91-03 5 Speed

Customize and upgrade the look and feel of your Harley Sportster with a high-quality USA Made bolt-on mid controls kit from TC Bros. Designed to fit all 883 and 1200 Sportster 5-speed models produced from 1991-2003. These controls feature classic lines and timeless good looks. Detailed mounting instructions & quality hardware are included to ensure trouble-free installation.

This is the same kit as this mid controls kit, except without footpegs or toe pegs.

You can re-use your stock pegs if on a budget, or choose from the vast array of aftermarket Harley pegs available today and get the exact look you desire.

Features:

• Precision fit bronze bushing pivots.
• TIG welded mounting brackets with durable black powder coat finish.
• Proudly made in the USA.
• Detailed mounting instructions and hardware are included.
• Foot position is the same as a set of OEM Harley mid controls for an all-around, comfortable ride.
• Replacement parts and tech support after the sale.