Name: Motogadget motoscope pro
Brand: motogadget
Price: 599.95 CAD
Availability: InStock

Motogadget motoscope pro

$599.95

motoscope pro

The motoscope pro is the most recent generation of motogadget's digital dashboard series.

Cutting-edge technology enables us to create ultra-slim casing designs. 734 LEDs - governed by a 16-bit RISC processor - create an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.

The rev-counter is displayed fully scalable via the analog LED band with a drag indicator function. The main and secondary displays are user-configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals via the Breakout Boxes. The motoscope pro is equipped with a fully-fledged CAN-bus interface and thus ready for many of tomorrow's developments like for example the plug 'n ride Breakout-Box Triumph (please see tab 'Triumph' above).

The dashboard communicates over a proprietary digital one-wire bus (m-Bus) with additional Breakout Boxes to easily expand the application spectrum. This makes the dashboard highly versatile and makes application to a wide range of vehicles and tasks possible.

The billet aluminum casing is CNC-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE and does not have to be registered.

Please order the Breakout Box to connect indicator light signals (see Breakout Box Std.) or to connect digital bus systems (Triumph, H-D) additionally. For BMW R9T a Breakout Box is not necessary.

Parts delivered

Instrument with ca. 55 cm connector cable
Speedometer sensor M5 x 0,5 fine-pitch thread (stainless steel, IP67) with ca. 150 cm connector cable
2 magnets
10 cable end connectors
In-line fuse
2 stainless steel screws
Detailed installation and operating instructions

Please note: Touch sensor not included anymore.

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Specifications and features

Length, Height, Depth	109 mm/ 47 mm/ 11 mm
Weight w/ cable	approx. 100 g
Mount	2 x M3 threaded hole
Power consumption, operating	max. 200 mA (load dependent)
Power consumption, standby	0.4 mA (load dependent)
Operating voltage	9 V - 15 V
Operating temperature	-20°... +80°C
Rev counter (LED bargraph)	0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer	0 – 350 km/h or mph
Trip meter A	bis 999.9 km or mi
Trip meter B	bis 999.9 km or mi
Total mileage (adjustable)	bis 250000 km or mi
Operating hours/Service	0 – 9999.5 h
Clock	23:59 h/min
Timekeeping	0 – 99:59:59 h/min/s
RPM count (on LCD)	0 – 20000 rpm
Adjustable RPM warning (gear shift flash)	0 – 20000 rpm
On-board voltage	9 – 18 V
Low voltage warning	Warning if below ca. 11V
Timekeeping 0 - 100 km/h or 0 - 60 mph	0.00 – 30.59 sec.
Actual accelleration	+/- 0.00 – 1.50 G
Average speed	0 – 350 km/h or mph
Max. speed	0 – 350 km/h or mph
Max. RPM	0 – 20000 rpm
Max. positive acceleration	+1.50 G
Max. negative acceleration	- 1.50 G
Gear display	N, gear 1 - 6
Green control LED (w/ breakoutbox A/B)	Neutral (N)
Green control LED (w/ breakoutbox A/B)	Turn indicator left/right
blue control LED (w/ breakoutbox A/B)	High beam
Red control LED (w/ breakoutbox A/B)	Miscellanious warning funktions
Fuel/Reserve (w/ breakoutbox A/B)	0 - 100% w/ low warning
Air temperature* (w/ breakoutbox B)	-20 - 80 °C / -4 - 176 °F w/ high/low warning
Water temperature* (w/ breakoutbox B)	40 - 120 °C / 104 - 248 °F w/ high/low warning
Oil temperature* (w/ breakoutbox B)	40 - 150 °C / 104 - 302 °F w/ high/low warning
Oil pressure* (w/ breakoutbox B)	0 - 8 bar / 0 - 116 psi w/ high/low warning

Motogadget Motoscope mini

$379.95

motoscope mini

The motoscope mini is a highly compact digital instrument for motorbikes.

The LED display we created for the motoscope mini is unique in the instrument realm. 251 ultra bright LEDs provide for an essentially rimless and extremely readable display surface which can entirely be used for the display of readings. This intricate and innovative technology combines a maximum of display surface with minimal casing dimensions.

The unadorned and elegant design of the motoscope mini and its high class appearance fits every bike, trike or four-wheel vehicle. Exposed mounting can reinforce style and looks, but it might just as well be installed more discretely and 'clean' - with the mini, everything is possible!

Casing

The high-quality aluminium casing is machined from solid metal and its surface is black anodized. The mirror polished variant has its own appeal. Electronics come completely moulded-in and are immune to weather, water, dust and vibrations.

Display and features

The innovative, ultra bright 251-LED dot matrix shows the engine speed in a scalable horizontal bargraph and all other features as easily readable numeric values. With the push of a button, the engine speed can be displayed as numerical value (rpm) as well.

For optimal readability in dark, sunlight and dawn conditions, the LED luminosity varies automatically.

Specific engine speed thresholds can be programmed for the display to show the maximum permissible engine speed ('red zone') or a gear shift light with all LEDs pulsating simultaneously.

The kicker: The display of the motoscope mini not only displays numeric values from left to right but from top to bottom as well. Thus, the instrument may also be mounted vertically!

Operation

You can toggle between the different informations on the LED display by operating the provided menu push-button or e.g. the headlight flasher push-button on the handle bar.

By default, the display shows the speed value. Other values may be displayed via push-button operation if needed. A feature for automatically switching back to the speed value after a predetermined time or leaving the manually chosen value on the display is provided.

Default settings or recorded values are of course stored even with the power supply switched off.

Mounting

Due to its compact dimensions, the motoscope mini is easily mounted just about anywhere on any vehicle. Single mount on your triple clamp or right onto the handle bar, embedded into already present instrument panels, into the tank or FBE - this instrument is applicable anywhere.

We offer universal mounts as well as brand specific solutions e.g. for Buell or Harley-Davidson. Please refer to 'Mounting'.

Connection and sensors

Hassle-free wiring and the detailed installation and operating instructions enables even users without any previous experience in handling the vehicles electrical system to connect this instrument.

The supplied speedometer sensor in stainless steel is very small (M5/25 mm). The 1.5 m connector cable easily connects it to the front or back wheel. This permits easy conversions of originally mechanical speedometer drives.

The motoscope mini is compatible with various original speedometer sensors (reed contact and proximity sensors) used by motorbike manufacturers. In these cases, only the terminals have to be connected while the installation of mechanical sensors will be completely obsolete.

An intelligent 'teaching' function provides for easy speedometer calibration - even in cases of vehicles with sensors at the gear box.

Parts delivered

Instrument with approx. 75 cm connector cable
Mini push-button
Removable fuse
6 cable end connectors
Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
2 powerful neodymium mini magnets
2 mounting screws M3
Detailed installation and operating instructions

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Motogadget MSM Combi Frame with Indicator Lights

Motogadget MSM Combi Frame with Indicator Lights

$149.95

MSM Combi Frame with Indicator Lights

The msm combi frame allows installation of motoscope mini to the handle bar with additional mounting hardware. 5 indicator lights and series resistors are pre-installed. The device is machined from solid aluminium and available in anodized or polished finish.

The combi frame comes with approx. 50 cm cable, screws and manual. Additional mounting parts like the combi Clip-Kit Bracket, combi Bolt-On Bracket, combi Weld-In Bracket or combi Mounting Bracket are required. The motoscope mini itself is not included.

Please note the two orange LEDs are replaced with green ones according to EU regulations since 2011.

Motogadget mst streamline cup

$155.00

mst Streamline Cup

The mst Streamline Cup is used for mounting all tiny series analogue speedometers on the handlebar. The intended use of these stylish brackets is the mounting of all 49 mm instruments of the tiny series to handlebars with a diameter of 22 mm and/or 1 in. The cups are completely turned and machined from solid aluminum. The mounting clamp is precisely laser-cut from aluminum and shaped and is used for an easy but secure mounting on the handlebar.

All mounting screws are stainless steel. Diameter 56 mm, Length 60 mm

Motogadget mst speedster tiny

$400.00

mst speedster tiny

The mst speedster is a small, analogue speedometer with an appealing vintage design.

The dial is based on the streamlined designs of the '40s and '50s. The colour is a matching 'warmer' white. The indicator shape is matched to the design of the dial and made from brushed stainless steel. There is a bezel in either 'polished finish' or 'anodized black' available.

All further properties and specifications of this instrument are identical to the motoscope tiny.

Parts delivered

Instrument with approx. 75 cm connector cable
Mini push-button
2 removable fuses
9 cable end connectors
Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
2 powerful neodymium mini magnets
2 mounting screws M3 with washer
2 diodes for pairing of turn signals
Detailed installation and operating instructions

Specifications and features

Mounting diameter	49 mm
Weight	approx. 96 g
Mount	2 x M3 threaded hole
Power consumption, operating	approx. 200 mA (load dependent)
Operating voltage	9 V - 15 V
Operating temperature	-20°... +80°C
Speedometer, analogue (indicator)	0 – 200 km/h or mi/h
Speedometer, numeric (LED display)	200 – 999 km/h or mi/h
Max. speed	0 – 999 km/h or mi/h
On-board voltage	9 – 15 V
Clock	00:00 – 23:59
Trip meter	0 – 999.9 km or mi
Total distance (adjustable)	99999 km or mi max.
Indicator lights	turn signal, high beam, neutral, hazard light

Motogadget msp Breakout Box B

$126.95

msp Breakout Box B

All motoscope pro indicator lights, temperature, and oil pressure signal cables are connected to the msp Breakout Box B.

Convenient screw-type terminals make child's play of the interconnections. Between the box and the motoscope pro just one cable is required (mo.bus). The msp Breakout Box is moulded-in waterproof and vibration-resistant.

The msp Breakout Box B is compatible with the last generation motoscope pro only. It is incompatible with the older first generation of the device (identified by the missing bar-code decal at backside).

Specifications and features

Dimensions (LxBxH)	26 x 39 x 10 mm
Input terminals	Fuel/reserve Oil pressure switch Left and right turn indicators High beam Neutral Motor warning light Oil temperature Water temperature Ambient temperature Oil pressure

Motogadget - msp Breakout Box A

$65.00

msp Breakout Box A

All motoscope pro indicator lights cables are connected to the msp Breakout Box A.

Convenient screw-type terminals make child's play of the interconnections. The compact dimensions facilitate the hidden mounting of the box and the numerous cables connected to it anywhere on the vehicle.

Between the box and the motoscope pro just one cable is required (mo.bus). The msp Breakout Box is moulded-in waterproof and vibration-resistant.

Dimensions (LxBxH)	26 x 39 x 10 mm
Input terminals	Fuel/reserve Oil pressure switch Left and right turn indicators High beam Neutral Motor warning light

Motogadget Motoscope Classic Speedometer

Motogadget Motoscope Classic Speedometer

$740.00

Motoscope Classic Speedometer

The motoscope classic speedo from motogadget is an analogue speedometer with many additional digital features in a classic round casing. A white dial and a red indicator driven by a precision stepper motor comprise the analogue rev counter. An LC display and four indicator LEDs indicate the additional features accurately and reliably.

This compact instrument creates new possibilities in vehicle design. The design goes well with every type of mod or original machine - regardless of a real classic, youngtimer, custom or sports bike. The motoscope classic is equally suited for sports or kit cars.

High-end materials, assembly by hand and our scrupulous quality control provide the highest possible quality in functionality and looks.

Casing

The high-quality aluminum casing is turned and machined from the block by CNC technology. The surface is brushed first and later anodized in black or natural aluminum. The casing is 100% water-tight. The viewing glass is made from scratch-proof special plastic. The widely used 80-mm-dimensions allow for easy replacement of the original instruments.

Analogue dial with indicator and the LC display

The readability of the speed is optimal due to the red indicator on the white dial. The innovative background illumination achieves maximum usage of the dial area.

The readability and illumination of the LC display remain outstanding, even in cases of direct sunlight. Four ultra-bright indicator LEDs complete the instrument. The red LED acts as a warning light when reaching the set threshold for rpm, temperatures (min./max.), pressure readings (min./max.), vehicle voltage and the oil pressure switch or similar connected transmitting devices. Different warnings are easily distinguishable due to different blinking patterns or continuous lighting.

Operation

Display pages of the LCD display are swapped with the menu button. Different measurement readings can be displayed if needed by the push of a button. Default settings or saved values will of course be preserved in the memory even if the power is cut.

Mounting

The widely used mounting diameter provides instrument adaptivity to many vehicle platforms. We provide optional mounting parts. Refer to "Mounting".

Sensors and connection

The connector cable is approx. 55 cm in length and the connectors are already pre-installed on the instrument side. Matching counter parts for the vehicle side are included.

The engine speed measurement input is easily connected to the ignition coil or ignition box. The included stainless steel speedometer sensor is small (M5/22 mm) and is effortlessly connected to the front or rear wheel by the 1.5 m connector cable.

We provide appropriate sensors for optimal measurements of air, oil and water temperature as well as oil pressure (refer to 'Accessories').

Versions

A technically identical instrument with a black dial (refer to 'Chronoclassic') or configured as an analogue speedometer (refer to the analogue CLASSIC series speedometer) is also available.

Parts delivered

Instrument with approx. 55 cm connector cable
Complete wiring
Fuse
Speedometer sensor M5 x 0,5 fine-pitch thread with 150 cm connector cable
2 x magnet
Mini push-button
3x M4 screw (stainless steel)
Detailed installation and operating instructions

Please note that temperature and pressure sensors have to be ordered separately (refer to 'Accessories').

Specifications and features

Mounting diameter	80 mm
Total diameter (bezel)	85 mm
Depth without cable fitting	34 mm
Weight	approx. 230 g
Mount	3 x M4 threaded hole
Power consumption, operating	approx. 200 mA (load dependent)
Power consumption, standby	0 mA
Operating voltage	9 V - 18 V
Operating temperature	-20°... +80°C
Speedometer (analogue/indicator)	0 – 200 km/h or mi/h, on top of LCD
Trip meter	999 km or mi max.
Total distance (adjustable)	250000 km or mi max.
Journey time display	0 – 99:99:99 h/min/s
Rev counter (on LCD)	0 – 20000 rpm
rpm threshold warning, adjustable (int. LED and ext. gear shift flash)	0 – 20000 rpm
On-board voltage display	9 V – 18 V
NEW! Low voltage warning	LED blinks if on-board voltage drops below approx. 11V - replacement for battery charge status light
Air temperature* (optional instead of water temp.)	-20 - 80 °C / -4 - 176 °F with high-/low warning
Water temperature* (optional instead of air temp.)	40 - 120 °C / 104 - 248 °F with high-/low warning
Oil temperature*	40 - 160 °C / 104 - 320 °F with high-/low warning
Oil pressure*	0 - 8 bar / 0 - 116 psi with high-/low warning
Timekeeping 0 - 100 km/h or 0 - 60 mi/h	0.0 – 99.9 s
Current acceleration	(-20.0) – 20.0 m/s2
Average speed	0 – 350 km/h or mi/h
Max. speed	0 – 350 km/h or mi/h
Max. rpm	0 – 20.000 rpm
Max. positive acceleration	0 – 20.0 m/s2
Max. negative acceleration	0 – (-20.0) m/s2
Gear indicator	N, gear 1 - 6
Green indicator LED	Neutral (N)
Yellow indicator LED	Turn signal left, right
Blue indicator LED	High beam
Red indicator LED	Different warning functions external (e. g. oil pressure switch), internal (rpm, temperature, pressure, voltage)
Output external gear shift flash light	Switched power 1.4 A max.

Motogadget msp Retaining Plate A - Black

$40.00

msp Retaining Plate A - Black

The holding plate msp A is a universally usable holder for the motoscope pro.

It is precisely lasered from aluminum and then brushed and anodized in black.

Height 12.8 mm, width 10.8 mm. It can be cut to length and drilled as required.

Motogadget Retaining plate msc A

$43.00

Retaining plate msc A

The holding plate msc A is suitable for the assembly of all Classic instruments.

Universal mounting plate made of aluminum, brushed and anodized, for the motoscope classic and Chronoclassic.

Total length 185 mm, width 85 mm (for cutting to length and drilling as required). Assembly by clamping with an external cup msc A.

Motogadget Outer Cup/ Cup msc A

$70.00

Outer Cup/Cup msc A

The outer cup mst A enables the installation of all Classic series speedometers. It closes flush with the screw ring of the instrument and the outer edge of the retaining plate.

When using the holding plates msc A and msc C, the outer cup is always necessary in order to clamp the instrument firmly against the holding plate.

motogadget motoscope tiny

$400.00

Motoscope Tiny

The motoscope tiny is a very small, analogue speedometer in 49mm format. It measures the speed digitally and displays it precisely using a stepper motor and pointer. The installation diameter of 49 mm and the installation depth of only 24 mm open up a wide range of installation options. Refined technology makes the classic look possible without compromise. The dial has no display cut-out or LCD and looks convincing in the classic style. The perfect solution for purists and minimalists.

casing

The high-quality aluminum housing is turned from solid and its surface is black anodized. The screw ring is also available black anodized or high-gloss polished.

The housing is 100% waterproof and insensitive to vibrations.

Display

The analogue dial in black and white contrast is indirectly illuminated by white LEDs. An innovative LED display is hidden behind the black part of the dial, which only lights up through the dial when it is in operation and is not visible when switched off.

In order to achieve optimal readability in darkness, sun and twilight, the luminosity of the LEDs is automatically adjusted.

If the 200 km / h on the analog scale is exceeded, the speed is automatically shown in the LED display. The maximum speed is also saved.

The 4 indicator lights (blue, red, 2 x green) are also integrated into the dial. These also only become visible during operation.

service

You can switch between the LED displays using the menu button supplied or, for example, the flasher button on the handlebar.

The standard indication on the display is the time. If necessary, the values for total kilometres, daily kilometres, onboard voltage, etc. are displayed by briefly pressing the button.

All functions, such as resetting the daily kilometres or the like, are easy to operate using the button. Presetting or saved values are of course saved even without power supply.

Cultivation

The motoscope tiny is easy to attach using the two M3 threaded sockets on the back. We offer various brackets for assembly. See under assembly.

Connection and sensors

The detailed installation and operating instructions (see under Downloads) make the connection of the instrument possible even for users who have previously stayed away from the vehicle electrics.

The supplied stainless steel speedometer sensor is very small (M5 / 23 mm) and easy to hide. With the 1.5 m long connection cable, it can be easily attached to the front or rear wheel. This means that vehicles with an original mechanical speedometer drive can also be easily converted.

The motoscope tiny is compatible with many original speed sensors (reed contact and proximity sensors) from the vehicle manufacturer. In this case, only connections are connected and the mechanical installation of a sensor is completely unnecessary.

An intelligent 'Teach function' enables the speedometer to be calibrated easily - even for vehicles with sensors on the gearbox such as Harley-Davidson (TM).

scope of delivery

The instrument with approx. 75 cm connection cable
Mini push-button
2 flying fuses
9 cable end connectors
Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connection cable
2 strong neodymium mini magnets
2 mounting screws M3 with washers
2 diodes for merging the indicators
Detailed installation and operating instructions

Specifications and features

Technical specifications
Mounting diameter	49 mm
Weight	approx. 96 g
Attachment	2 x M3 threaded bushes
Current consumption in operation	approx. 200 mA (depending on load)
Power consumption in idle state	0 mA
Operating voltage	9V - 15V
operating temperature	-20 ° ... + 80 ° C

function	Measuring range
Analog speedometer (pointer)	0 - 200 km / h or mph
Numerical speedometer (LED display)	200 - 999 km / h or mph
maximum speed	0 - 999 km / h or mph
Board voltage	9-15V
Time	00:00 - 23:59
Trip odometer	0 - 999.9 km or mi
Total kilometres (adjustable)	up to 99,999 km or mi
Indicator lights	Indicator, high beam, neutral, warning lamp

motogadget MST Vintage Gauge

$470.00

MST Vintage Gauge

The mst vintage is a small, analogue speedometer with a brass bezel in an appealing 'old school' look.

The design is different, but technically it is identical to the motoscope tiny. The dial is based on the streamlined design of the '40s and '50s. Additionally, it features a yellowed and cracky surface giving the dial its extremely aged look.

The bezel and indicator are made from solid brass and have been manually coated with patina. The created patterns and signs of ageing vary with each instrument and give it an individual and unique look.

There is a special matching Streamline Cup available for the mst Vintage - made from solid brass with a patina. Refer to 'Mounting'.

THIS IS FOR THE GAUGE ONLY. VISIT HERE FOR THE MST VINTAGE CUP

Apart from weight, all further properties and specifications of this instrument are identical with the motoscope tiny.

Parts delivered

Instrument with approx. 75 cm connector cable
Mini push-button
2 removable fuses
9 cable end connectors
Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
2 powerful neodymium mini magnets
2 mounting screws M3 with washer
2 diodes for pairing of turn signals
Detailed installation and operating instructions

Specifications and features

Mounting diameter	49 mm
Weight	approx. 110 g
Mount	2 x M3 threaded hole
Power consumption, operating	approx. 200 mA (load dependent)
Operating voltage	9 V - 15 V
Operating temperature	-20°... +80°C
Speedometer, analogue (indicator)	0 – 200 km/h or mi/h
Speedometer, numeric (LED display)	200 – 999 km/h or mi/h
Max. speed	0 – 999 km/h or mi/h
On-board voltage	9 – 15 V
Clock	00:00 – 23:59
Trip meter	0 – 999.9 km or mi
Total distance (adjustable)	99999 km or mi max.
Indicator lights	turn signal, high beam, neutral, hazard light

motogadget MST Vintage Cup Brass

$195.00

MST Vintage Cup Brass

The mst Vintage Cup is used for mounting of the mst vintage on 22 mm and 1 in. handlebars. Brass cup for the tiny series, especially the mst vintage - lavishly turned/machined from solid metal. 'Used look' to match with the Vintage instrument. Each cup is unique due to the manually coated patina.

Secure mounting on 22 mm handlebars with polished handlebar clamp. The real 'eye-catcher' for every custom bike. Diameter 56 mm, Length 60 mm.

This is for the cup only. Visit here for the most vintage gauge

Motogadget MSM Combi Handle Bar Bolt-On Bracket

Motogadget MSM Combi Handle Bar Bolt-On Bracket

$145.50

MSM Combi Handle Bar Bolt-On Bracket

In connection with the combi Frame, the Handle Bar Bolt-On Bracket is used to mount the motoscope mini to the handlebar. The handlebar has to be drilled.

Mounting bracket and required parts included. The combi frame and the motoscope mini are not included.

PLEASE SPECIFY IN NOTES IF YOU REQUIRE 1" OR 7/8" WHEN ORDERING

Motogadget MSM Combi Handle Bar Clip-Kit Bracket

Motogadget MSM Combi Handle Bar Clip-Kit Bracket

$145.95

MSM Combi Handle Bar Clip-Kit Bracket

In connection with the combi Frame, the Handle Bar Clip-Kit Bracket is used to mount the motoscope mini to the handlebar. It is not required to drill the handlebar.

Includes mounting bracket and Handle Bar Clip-Kit with corresponding screws. The combi frame and the motoscope mini are not included.

PLEASE SPECIFY IF YOU HAVE 1" OR 7/8" BARS

Motogadget Chronoclassic

$770.00

Chronoclassic

The Chronoclassic from motogadget is a digital multifunctional instrument in a classic round case.

Technically identical to the motoscope classic, the Chronoclassic is characterized by its black dial and white pointer. The design is reminiscent of old Smith's instruments.

Versions

Another special feature of the DarkEdition is the dark LC display. It gives the instrument an even more harmonious appearance.

However, we expressly point out that the readability is reduced in direct sunlight. If you value the best possible readability, please use the green standard display.

The identical instrument is also available as an analog tachometer (see Classic analog tachometer).

scope of delivery

Instrument with approx. 55 cm connection cable
Complete plug connection
Fuse
Speedometer sensor M5 x 0.5 (fine thread) with 150 cm connection cable
2 x magnet
Mini push-button
3x VA screws M4
Detailed installation and operating instructions

Please note that temperature and pressure sensors have to be ordered separately (see accessories).

Specifications and features

Technical specifications
Mounting diameter	80 mm
Total diameter (screw ring):	85 mm
Depth without cable gland	34 mm
Weight	approx. 230 g
Attachment	3 x M4 threaded bushes
Current consumption in operation	approx. 200 mA (depending on load)
Power consumption in idle state	0 mA
Operating voltage	9V - 18V
operating temperatur	-20 ° ... + 80 ° C

function	Measuring range
Tachometer (analog / pointer)	0 - 8, 10 or 14 krpm
Speedometer (LCD)	0 - 350 km / h or mph
Trip odometer	up to 999 km or mi
Total kilometers (adjustable)	up to 250,000 km or mi
Travel time display	0 - 99:99:99 h / min / s
Tachometer (on LCD)	0 - 20,000 rpm
adjustable speed warning (internal LED and external shift light)	0 - 20,000 rpm
On-board voltage display	9V - 18V
NEW! Low voltage warning	LED flashes when the on-board voltage falls below approx. 11V - replaces the charge control lamp
Air temperature * (optionally instead of water temp.)	-20 - 80 ° C / -4 - 176 ° F with high / low warning
Water temperature * (optionally instead of air temp.)	40 - 120 ° C / 104 - 248 ° F with high / low warning
Oil temperature *	40 - 160 ° C / 104 - 320 ° F with high / low warning
Oil pressure*	0.5 - 8 bar / 8 - 116 psi with high / low warning
Time measurement 0 - 100 km / h or 0 - 60 mph	0.0 - 99.9 sec.
momentary acceleration	(-20.0) - 20.0 m / s2
Average speed	0 - 350 km / h or mph
Maximum value speed	0 - 350 km / h or mph
Maximum speed value	0 - 20,000 rpm
max. positive acceleration	0 - 20.0 m / s2
max. negative acceleration	0 - (- 20.0) m / s2
Gear indicator	N, aisles 1 - 6
green control LED	Idle (N)
yellow control LED	Turn signal left, right
blue control LED	High beam
red warning LED	various warning functions external (e.g. oil pressure switch), internal (speed, temperature, pressure, voltage)
Output for ext. Shift light	Switching capacity max. 1.4 A.

Motogadget Motoscope mini Handle Bar Clip Kit

Motogadget Motoscope mini Handle Bar Clip Kit

$137.95

Handle Bar Clip Kit

The Handle Bar Clip Kit allows mounting the motoscope mini or motosign mini directly to the handlebar.

Kit includes: Two clamps with stainless steel mounting screws.

PLEASE SPECIFY IF YOU NEED THIS KIT FOR 1" OR 7/8" BARS

Motogadget H-D Twin Cam Rockerbox Bracket

Motogadget H-D Twin Cam Rockerbox Bracket

$305.95

H-D Twin Cam Rockerbox Bracket

The H-D TwinCam Rockerbox Bracket allows mounting the motoscope mini sideways to all Harley-Davidson™ TwinCam series motors.

Kit includes: Bracket, plastic disks for heat shielding, stainless steel mounting screws, steel braided hose, manual.

Motogadget H-D Evo BigTwin Rockerbox Bracket

Motogadget H-D Evo BigTwin Rockerbox Bracket

$301.95

H-D Evo BigTwin Rockerbox Bracket

The H-D Evo Rockerbox Bracket allows mounting the motoscope mini sideways to all Harley-Davidson™ Evo series motors.

Kit includes: Bracket, plastic disks for heat shielding, stainless steel mounting screws, steel braided hose, manual.

Motogadget MSM Weld-In Cup Stainless

$114.95

MSM Weld-In Cup Stainless

msm Weld-in Cup in stainless steel for facilitated embedding of the motoscope mini into the tank or weld-mounting it onto the handlebar.

Motogadget MSM Combi Weld-In Cup (stainless steel)

$136.95

MSM Combi Weld-In Cup (stainless steel)

msm combi stainless steel weld-in cup for facilitated embedding of the combi frame into the tank or welding it, e.g. to the handlebar.

Motogadget Speed Sensor M5

$79.95

Speed Sensor (inductive prox. sensor) negative/ground signal

The inductive proximity sensor can be deployed as alternative speedometer sensor on all our instruments. It requires NO magnets to pick up impulses.

Usually it is just pointed at big rotating metal parts. Depending on the type of motorbike, adjustment is more demanding as is the adjustment of e.g. Dry-Reed contacts.

M5 threading, 25 mm length, 2 nuts included. Cable length 150 cm

ATTENTION: this is a speed sensor with NEGATIVE/GROUND signal. It is used with our latest instruments. Please check with your manual, what signal your speedo input expects.

If you need a positive signal please see speedo sensor with positive signal - order no. 9007046.

Specifications and features

ATTENTION: this is a speed sensor with NEGATIVE/GROUND signal. It is used with our latest instruments. Please check with your manual, what signal your speedo input expects.

If you need a replacement, your sensor cable should have an imprint DW-AD-601-M8-121 NPN.

If not please see speedo sensor with negative signal

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information