The mst Vintage Cup is used for mounting of the mst vintage on 22 mm and 1 in. handlebars. Brass cup for the tiny series, especially the mst vintage - lavishly turned/machined from solid metal. 'Used look' to match with the Vintage instrument. Each cup is unique due to the manually coated patina.
Secure mounting on 22 mm handlebars with polished handlebar clamp. The real 'eye-catcher' for every custom bike. Diameter 56 mm, Length 60 mm.
This is for the cup only. Visit here for the most vintage gauge
Motogadget motoscope proRegular price $599.95
|Length, Height, Depth||109 mm/ 47 mm/ 11 mm|
|Weight w/ cable||approx. 100 g|
|Mount||2 x M3 threaded hole|
|Power consumption, operating||max. 200 mA (load dependent)|
|Power consumption, standby||0.4 mA (load dependent)|
|Operating voltage||9 V - 15 V|
|Operating temperature||-20°... +80°C|
|Rev counter (LED bargraph)
||0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
||0 – 350 km/h or mph|
|Trip meter A
||bis 999.9 km or mi|
|Trip meter B
||bis 999.9 km or mi|
|Total mileage (adjustable)||bis 250000 km or mi|
|Operating hours/Service||0 – 9999.5 h|
|Timekeeping||0 – 99:59:59 h/min/s|
|RPM count (on LCD)||0 – 20000 rpm|
|Adjustable RPM warning (gear shift flash)||0 – 20000 rpm|
|On-board voltage||9 – 18 V|
|Low voltage warning||Warning if below ca. 11V|
|Timekeeping 0 - 100 km/h or 0 - 60 mph||0.00 – 30.59 sec.|
|Actual accelleration||+/- 0.00 – 1.50 G
|Average speed||0 – 350 km/h or mph|
|Max. speed||0 – 350 km/h or mph|
|Max. RPM||0 – 20000 rpm|
|Max. positive acceleration||+1.50 G
|Max. negative acceleration||- 1.50 G
|Gear display||N, gear 1 - 6|
|Green control LED (w/ breakoutbox A/B)||Neutral (N)|
|Green control LED (w/ breakoutbox A/B)||Turn indicator left/right|
|blue control LED (w/ breakoutbox A/B)||High beam|
|Red control LED (w/ breakoutbox A/B)||Miscellanious warning funktions|
|Fuel/Reserve (w/ breakoutbox A/B)||0 - 100% w/ low warning|
|Air temperature* (w/ breakoutbox B)||-20 - 80 °C / -4 - 176 °F w/ high/low warning|
|Water temperature* (w/ breakoutbox B)||40 - 120 °C / 104 - 248 °F w/ high/low warning|
|Oil temperature* (w/ breakoutbox B)||40 - 150 °C / 104 - 302 °F w/ high/low warning|
|Oil pressure* (w/ breakoutbox B)||0 - 8 bar / 0 - 116 psi w/ high/low warning|
Motogadget Motoscope miniRegular price $379.95
**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information
Motogadget - msp Breakout Box ARegular price $65.00
All motoscope pro indicator lights cables are connected to the msp Breakout Box A.
Convenient screw-type terminals make child's play of the interconnections. The compact dimensions facilitate the hidden mounting of the box and the numerous cables connected to it anywhere on the vehicle.
Between the box and the motoscope pro just one cable is required (mo.bus). The msp Breakout Box is moulded-in waterproof and vibration-resistant.
|Dimensions (LxBxH)||26 x 39 x 10 mm|
Oil pressure switch
Left and right turn indicators
Motor warning light
Motogadget mst streamline cupRegular price $155.00
The mst Streamline Cup is used for mounting all tiny series analogue speedometers on the handlebar. The intended use of these stylish brackets is the mounting of all 49 mm instruments of the tiny series to handlebars with a diameter of 22 mm and/or 1 in. The cups are completely turned and machined from solid aluminum. The mounting clamp is precisely laser-cut from aluminum and shaped and is used for an easy but secure mounting on the handlebar.
All mounting screws are stainless steel. Diameter 56 mm, Length 60 mm
Motogadget MSM Combi Frame with Indicator LightsRegular price $149.95
The msm combi frame allows installation of motoscope mini to the handle bar with additional mounting hardware. 5 indicator lights and series resistors are pre-installed. The device is machined from solid aluminium and available in anodized or polished finish.
The combi frame comes with approx. 50 cm cable, screws and manual. Additional mounting parts like the combi Clip-Kit Bracket, combi Bolt-On Bracket, combi Weld-In Bracket or combi Mounting Bracket are required. The motoscope mini itself is not included.
Please note the two orange LEDs are replaced with green ones according to EU regulations since 2011.