Exhaust

XS650 - Builders Kit

TC Bros. Do it yourself exhaust kit for all years of the Yamaha XS650.

Kit Includes 2 flanges and collars to fit your stock XS650 head, 2 mandrel bent 90 degree pieces, 2 mandrel bent 180 degree pieces and 2 straight length pieces.

Tubing is 1.5 inch diameter 16 gauge mild steel and is bent on a 3" Centerline Radius. Flanges are 1/4 inch thick. Plenty of material is included to make just about any custom exhaust that you think of!

Made in the USA.

 DIY Builder Exhaust Kit fits Harley Davidson 3 Bolt STD Heads

do it yourself builder’s exhaust kit fits all Harley Davidson Panhead and Shovelhead engines utilizing the 3-bolt STD exhaust flange heads. This kit comes with everything you need to cut and weld a set of custom pipes for your bike and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper heavy duty, TIG welded, ¼" thick flange set to fit your STD head bike with a leak free seal.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

DIY Builder Exhaust Kit fits Harley Davidson Panhead

do it yourself builder’s exhaust kit fits all Harley Davidson Panhead engines with heads that utilize clamp on exhaust headers. This kit comes with everything you need to cut and weld a set of custom pipes for your Pan and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper flange set to fit your bike.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

DIY Builder Exhaust Kit fits Harley Davidson Shovelhead

do it yourself builder’s exhaust kit fits all Harley Davidson Shovelhead engines utilizing single-bolt exhaust flange heads. This kit comes with everything you need to cut and weld a set of custom pipes for your Shovel powered bike and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper heavy duty, TIG welded, ¼" thick flange set to fit your bike with a leak free seal.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo

do it yourself builder’s exhaust kit fits all Harley Davidson Evolution engines including all Sportster and Big Twin Models produced from 1984-Present (including Twin Cam). This kit comes with everything you need to cut and weld a set of custom pipes for your Evo powered bike and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper heavy duty flange set to fit your bike with a leak free seal.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

DIY Builder Exhaust Kit fits 57-85 Harley Sportster Ironhead

do it yourself builder’s exhaust kit fits all Harley Davidson Sportster Ironhead engines produced from 1957-85. This kit comes with everything you need to cut and weld a set of custom pipes for your Ironhead Sporty and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper flange set to fit your bike.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

High Performance Washable Air Filter Element for TC Bros Air Cleaners

High Performance Washable Air Filter Element for TC Bros Air Cleaners. Dimensions: ID: 2.875 in (73 mm), OD: 3.875 in (98.4 mm), Height: 2.25 in (57.1 mm). NOT LEGAL FOR SALE OR USE IN CALIFORNIA

xs650 Billet Aluminum Intake Manifolods

XS650 Billet Aluminum Intake Manifolds allow fitment of aftermarket 34-36mm Mikuni VM Roundslide carburetors to 1970-1984 Yamaha XS650 and TX650 models.

Get rid of your cracked and leaking rubber intake manifolds and replace them with our super trick CNC machined billet aluminum racing intakes. These are very sturdy and improve flow to your motor. They are perfect when installing aftermarket carbs. Your stock rubber intakes are not designed to support the weight your carbs without your stock airboxes installed, causing them to crack over time. Our aluminum intakes are much stronger and will not crack.

Kit includes stainless steel hoseclamps that will never rust.

These will fit aftermarket 34-36mm Mikuni VM Roundslide Carbs ONLY. Will not fit stock 34mm CV or BS, stock 38mm, or Mikuni 38mm VM Roundslide Carbs.

Sold as a pair. 

Made In USA.

Shotgun Exhaust Pipes - Honda Shadow VT600 VLX 600 - Black

The shotgun exhaust pipes for your Honda Shadow VT600 VLX600 are a straight pipe with a high position on the bike to radically change the look of your build to give it a more aggressive tracker style! 

Fits: 

• Honda Shadow VT600 & VLX 1988 - 2007

Specs:

• Made from 16ga steel
• TIG welded to our DOM steel bosses
• 3/8" thick steel collars
• Includes new exhaust nuts and spacers for stock studs
• Fits 1988 - 2007 Honda Shadow VT600, aka VLX 600**
• It will not fit any other models
• Does NOT include exhaust gaskets

The Street Sweeper Shotgun Exhaust is inspired by days past of bad hombre's who got mowed down by righteous dudes with boom sticks; in a time when a man didn't need to know what a duvet was!

Any time a change is made to your motorcycle exhaust or intake, a re-jet, aka tuning is necessary. Our Performance Tuning Kit is meant to work with a free-flowing velocity stack and a free-flowing exhaust system. Our Performance Tuning Kit is intended as a performance upgrade with velocity stacks and or/open exhaust and is not recommended for a stock intake setup or other aftermarket setups. You can pick up a kit HERE 

To clean chrome pipes use Windex and a clean microfiber cloth. Do not use steel wool. Do not clean pipes until they are cold to the touch. Even pipes that have been in the sun can sometimes be too hot to clean. Do not use anything other than Windex to clean chrome pipes. The colour change is normal on all pipes even when plated as they are single-wall exhaust. Natural steel pipes WILL develop rust unless you plate or coat them, however, many people want that ratty look. We recommend you DO NOT WRAP your exhaust! Our lifetime warranty does not cover natural steel exhaust pipes.

**You may need to remove your side cover, passenger peg, and mount to accommodate these pipes.** 

If you are concerned about sound levels we offer some bolt-in baffles that will reduce the volume of the pipes. 

FOR CLOSED COURSE USE ONLY. NOT FOR ON-ROAD USE. Be a rebel.

Builders Exhaust Kit for Honda Shadow VT600 VLX 600

You've got a vision for your vt600 but you just can't find the exhaust that stacks up to your creation. It can only mean one thing. It's time to roll up your sleeves and get your hands dirty making your own. This kit is made specifically for the Honda Shadow vt600 and vlx600

Fits Honda Shadow VT600, VLX & Steed 1988 - 2007

This Kit Contains 1.75" OD Mild Steel 16ga Exhaust Tubing: 

• Qty 2: 20" Straight Tubing Section 
• Qty 2: 45 Degree Bends 2.5" Radius
• Qty 2: 90 Degree Bends 2.5" Radius
• Qty 1: 2.5" Radius U-Bend 
• Qty 4: Exhaust Flange Nuts
• Qty 4: Exhaust Flange Nut Aluminum Spacers
• Qty 1: VT600 Builders Exhaust Boss and Collar Set (Fits years 1988 - 2007)  

This kit requires fabrication. As with all our builders' parts the use of these parts is completely up to you and we are unable to give any fabrication advice.

Builders Exhaust Kit for VT750 1998-2020

No cookie-cutter exhuast here! Bring your vision to life. Bust out the grinder and the welding machine and use this complete kit to fabricate your own exhaust!

Fits Honda Shadow VT750 models from 1998-2020

This Kit Contains 1.75" OD Mild Steel 16ga Exhaust Tubing: 

• Qty 2: 20" Straight Tubing Section 
• Qty 2: 45 Degree Bends 2.5" Radius
• Qty 2: 90 Degree Bends 2.5" Radius
• Qty 1: 2.5" Radius U-Bend 
• Qty 4: Exhaust Flange Nuts
• Qty 4: Exhaust Flange Nut Aluminum Spacers
• Qty 1: VT750 Builders Exhaust Boss and Collar Set (Fits years 1998 - 2020)  

This kit requires fabrication. As with all of the TJBC builders parts the use of these parts is completely up to you and we are unable to give any fabrication advice.

NOTE: Some models outside the US have 02 Bungs, you will need to source your own 02 bungs. 

Magnus V Upsweep Exhaust - Fits Honda Shadow VT600 VLX600 - Raw Steel Finish

The Magnus V exhaust pipes for the Honda Shadow VLX600 are a simple yet bold descendant of the classic up-swept exhaust of chopper years past. You live your life marching to the beat of your own drum, hell, maybe you even built that drum, and you like it that way! So why should your bike be anything less?  With the throttle screwed in, the only sounds are the wind and the dull rumble of your exhaust pipes. Pure living and inspiration. Inspiration comes in many forms and sometimes the past inspires us to recreate and adapt its cues of style to our lives and our rides. 

*Please note that this is for a raw steel exhaust. You will need to chrome, coat, or paint this exhaust. We always suggest a professional coating so that the exhaust does not rust and rot away.*

Fits all years of VT600, VLX, and Steed.
DOES NOT FIT ANY OTHER MODELS. 

SPECS:

• 16ga steel tubing
• TIG-welded construction
• TJ Brutal Customs DOM exhaust bosses
• 3/8" thick steel collars
• Does NOT include exhaust gaskets

**ORDERS MAY INCUR AN OVER-SIZED SHIPPING FEE**

Made from 16 ga, 1.75" mild steel tubing and TIG welded by the pancake-batter-white, expertly trained hands of a Honda Chopper Geisha (Not really; they're actually welded by a sweaty, tattooed, bearded dude, named TJ, and he is nowhere near as elegant as a geisha). This exhaust is the perfect fit for the individually-styled, chopper-purist rider or the fan of simple exhaust style. 

The ends are a straight cut which allows you to customize with fishtails, mufflers, baffles, or feathers....whatever tickles yer pickle, man! Installing baffles will give the bike a bit more of a tame rumble. 

Each set includes exhaust nuts, and a spacer and nut To mount the pipes to the stock exhaust mount. 

**You will need the stock exhaust mounting stud intact on your bike for these to mount. If you hacked it off, (like I did, oops) you can weld a stud or bolt in its place to hang the exhaust. Raw steel pipes WILL rust unless you plate or coat them. 

Disclaimer shit - For race or show use only... Cuz we have to.