Seats and Hardware

King & Queen Seat

TC Bros. King & Queen hardtail chopper seats feature quality American construction and timeless looks. Handmade in the USA, these seats are designed to be a perfect fit to their 1982-03 Sportster weld-on hardtails using their mounting kit, fender, and sissy bar (sold separately). Six 5/16-18 threaded mounts on the heavy 14ga powder-coated steel seat pan make it possible to fit these seats to many other hardtail frames as well. Hand-stitched from 100% Marine grade vinyl, these seats look like leather but without the maintenance. Bolt-on some serious style to your bike with this seat!

Pattern available in diamond or pleaded

Weld On Threaded Solo Seat Spring Mounts

TC Bros. Choppers pair of Custom Weld on Chopper/Bobber Solo Seat Spring mounts.

Great for torsion style seat springs.

CNC Machined from 1018 cold rolled steel and are ready to weld on. 
Stainless Steel Studs are 5/16"-18 thread and base is 1" diameter with a 1 1/8" radius coped into the mount. Easily fits 1" and 1 1/4" cross tubes.

Kit Includes 2 CNC Machined mild steel mounts, 2 stainless steel washers, 2 stainless steel studs, 2 nylock nuts. (seat springs not included).

Just like their front seat pivot these are universal and can fit endless applications.

TC Bros. Weld-On Front Solo Seat Pivot / Hinge for Bobbers & Choppers

This pivot bracket is made from one piece of 3/16" steel for the ultimate in strength and simplicity. Unlike welded pivot brackets, the one piece design eliminates the possibility of a cracked seat pivot bracket caused by a failed weld. It also makes for a very low profile that looks great on just about every aftermarket spring style solo seat made. The long slotted holes permit a wide range of fitments and allow for adjustability. The finish on the bracket is black powdercoat for durability. This simple design also permits the weld-on mount to be mounted to either a round frame tube or a flat surface without a standoff and without interference to the pivoting action because the weld-on pivot mount is slightly larger in diameter than the rest of the components. The weld-on pivot mount is raw finish steel and ready to weld. The 3/8" hex socket cap bolt is stainless steel, as well as the washer and nylock nut so they will never rust. The replaceable bushings are oil impregnated bronze for a squeak free ride and very long life. Fitment possibilities are nearly endless. If you have a solo seat with springs on it, this bracket will probably fit.

Made in USA.

Chrome Seat Springs (pair)

Hardtail Rigid Cobra Seat

TC Bros. Cobra hardtail chopper seats feature quality American construction and timeless looks. Handmade in the USA, these seats are designed to be a perfect fit to the TC Bros. 1982-03 Sportster weld-on hardtails using their mounting kit and fender.

Five 5/16-18 threaded mounts on the heavy 14ga powder coated steel seat pan make it possible to fit these seats to many other hardtail frames as well. Hand stitched from 100% Marine grade vinyl, these seats look like leather but without the maintenance.

Bolt-on some serious style to your bike with this seat!

Available in diamond or pleaded.

PLEASE CONTACT US FOR AVAILABILITY IF INTERESTED IN PURCHASING THIS ITEM.  INFO@PERTHCOUNTYMOTO.COM

STAINLESS STEEL SEAT HINGE - POLISHED

Overview: This investment-cast stainless steel seat hinge from Biltwell may very well outlast the rest of your motorcycle. Cast in stainless steel and polished, it fits all solo seat pans with protruding hardware in the nose. Two long slots provide a broad range of fore/aft adjustability. This seat hinge features a steel frame bung with self-lubricating bronze pivot bushings. Finished off with a chrome-plated shoulder bolt to fasten the unit to your moto.

• Cast stainless steel
• Mirror polished
• Raw steel frame bung w/ bronze bushings
• Cast Biltwell logo
• Chrome shouldered Allen bolt included

Install Tip: For added insurance, use a drop of your favorite threadlocker when installing the pivot bolt.

Rigid Solo and Cobra Seat Mounting Kit

Everything you need to mount your TC Bros. Rigid Solo or Cobra Seat. The weld-on bracket is coped to fit our Sportster hardtail perfectly. Mounts are slotted if you want to use this for a universal/custom use.

Macho Negro Seat Hinge - Black

Overview: This investment-cast stainless steel seat hinge from Biltwell may very well outlast the rest of your motorcycle. Cast in stainless steel and polished, it fits all solo seat pans with protruding hardware in the nose. Two long slots provide a broad range of fore/aft adjustability. This seat hinge features a steel frame bung with self-lubricating bronze pivot bushings. Finished off with a chrome-plated shoulder bolt to fasten the unit to your moto.

• Black electroplated finish
• Raw steel frame bung w/ bronze bushings
• Cast Biltwell logo
• Chrome shouldered Allen bolt included

Install Tip: For added insurance, use a drop of your favourite threadlocker when installing the pivot bolt.

King Cobra Seat - Brown

The folks over at Prism Supply Co. spent a long time working on these seats. Sourcing the best material and upholsterer to do the job! These bolt-on seats for 82-03 Harley Davidson Sportsters are finally here. They guarantee you won't be disappointed with the quality and the comfort. 

• Made in USA
• Leather
• Brown
• Tuck N' Roll Stitching

Dimensions are as follows:

• 26" overall length
• 3.9" wide at passenger section
• 2" thick foam

These are not made for rigid frames.  They are made for swing arm Sportsters using the stock frame and fender.

Sportster King & Queen Seat Fits 1994-2003 

TC Bros. King & Queen Sportster seats feature quality construction and timeless looks. Handmade from the finest materials, these seats are designed to be a perfect fit for stock frame 1994-03 Harley Davidson Sportster models.

TC Bros. sissy bars are required to run this seat (sold separately).
Compatible with these TC Bros Sissy Bars
Sissy Bar Chrome

Sissy Bar Black

Kickback Sissy Bar Chrome

Kickback Sissy Bar Black

Heavy 14ga powder-coated steel seat pan. Hand-stitched from 100% Marine-grade semi-gloss vinyl, these seats look like leather but without maintenance.

This listing is for a diamond pleated stitching style. See part #106-0114 if you would prefer pleated stitching. Bolt-on some serious style to your bike with this seat!

Note: These seats can be fit on 1982-1993 Sportster frames as well but you will need to fabricate your own sissy bar. 

Frame Mount Solo Seat Kit

• Designed for installing Drag Specialties large and small spring solo seats
• Includes spring mount bracket with 3" chrome springs, seat bracket, leather frame cover, and instructions
• Mount is black powder-coated, steel spring mount studs are stainless steel and all other hardware is zinc coated
• Height is determined based on spring style
• Made in the U.S.A.
• Fits 04-06, 10-20 XL
• Mounting kit only. Seat not included

Midline Tuck N Roll

Our newest DIY solo seat features a shape aficionado of the classic chopper game will recognize instantly. The nose, side profile and rear kick are classic Bates.

Hardtail Rigid Mount Solo Seat

TC Bros. rigid mount chopper solo seats feature quality American construction and timeless looks. Handmade in the USA, these seats are designed to be a perfect fit to the TC Bros. 1982-03 Sportster weld-on hardtails using their mounting kit & fender (sold separately). Four 5/16-18 threaded mounts on the heavy 14ga powder coated steel seat pan make it possible to fit these seats to many other hardtail frames as well. Hand stitched from 100% Marine grade vinyl, these seats look like leather but without the maintenance. Bolt-on some serious style to your bike with this seat!

Available in diamond or pleated.

PLEASE CONTACT US FOR AVAILABILITY IF INTERESTED IN PURCHASING THIS ITEM.  INFO@PERTHCOUNTYMOTO.COM

Bates Black Vinyl Solo Seat

Solo seat black vinyl features a metal baseplate which includes studs for mounting springs and nose brackets.
Order mount kits and nose T bracket separately. The two spring studs under the solo seat measure 3-1/8" center-to-center in the front and 7" center-to-center in the rear. *NOTE: Threads are 6mm.

Bates Tuck and Roll Solo Seat

Bates style vinyl solo seat features original tuck and roll style stitching. Seat has 2" riser at rear, with 5/16" x 18 thread mount studs welded in place.
Bolt holes are 7" apart, 7-1/4" from the front stud and the front studs are 3-1/4" apart.