Seat

King & Queen Seat

LIMITED QUANTITY NOW BACK IN STOCK!

TC Bros. King & Queen hardtail chopper seats feature quality American construction and timeless looks. Handmade in the USA, these seats are designed to be a perfect fit to their 1982-03 Sportster weld-on hardtails using their mounting kit, fender, and sissy bar (sold separately). Six 5/16-18 threaded mounts on the heavy 14ga powder-coated steel seat pan make it possible to fit these seats to many other hardtail frames as well. Hand-stitched from 100% Marine grade vinyl, these seats look like leather but without the maintenance. Bolt-on some serious style to your bike with this seat!

Pattern available in diamond or pleaded

Solo Seat 2 - Diamond

 1/8-inch thick (3mm) stamped steel pan with welded carriage bolts on nose and tail for spring and hinge mounting. One inch thick moulded polyurethane foam padding with a hand-stitched heavy-duty vinyl cover. Four carriage bolts are welded onto the bottom of the pan to facilitate spring and seat hinge mounting. Your frame may require modifications to nose hinge and spring bungs for proper fitment.

Solo Seat 2 - Tuck N' Roll

 1/8-inch thick (3mm) stamped steel pan with welded carriage bolts on nose and tail for spring and hinge mounting. One inch thick moulded polyurethane foam padding with a hand-stitched heavy-duty vinyl cover. Four carriage bolts are welded onto the bottom of the pan to facilitate spring and seat hinge mounting. Your frame may require modifications to nose hinge and spring bungs for proper fitment.

13” Super Cushion Vinyl Spring Seat Kit C50

Please note, our seat kit will not work with the stock rear fender.

Refer to the 13″ regular spring seat kit descriptions for specific details for your bike make and model. The bike shown is a Honda 750 Spirit Chain Drive.

Your butt will love this seat! We use the best quality outdoor vinyl, which makes our seats the best in the business. The 1/8″ 6061 aircraft aluminum pan is curved just right to keep you in place. These aren’t imported seats!!! We make them right here in Sandy, Utah. 2 1/2″ ultimate grade foam is under the best quality vinyl. At 13″ wide our large seat is very comfortable. It’s the ultimate for longer rides. Our mounting brackets are heavy steel or aluminum and powder coated gloss black (to match your frame). 3/8″ diameter holes to mount your rear signal lights are located in the seat brackets. Every nut and bolt is included.

Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left-hand corner of the video to see the list of videos to choose from. No drilling or welding is required.

Frame Mount Solo Seat Kit

• Designed for installing Drag Specialties large and small spring solo seats
• Includes spring mount bracket with 3" chrome springs, seat bracket, leather frame cover, and instructions
• Mount is black powder-coated, steel spring mount studs are stainless steel and all other hardware is zinc coated
• Height is determined based on spring style
• Made in the U.S.A.
• Fits 04-06, 10-20 XL
• Mounting kit only. Seat not included

King Cobra Seat - Black

We've been working on these seats for a while sourcing the best material and upholsterer to do the job! These bolt-on seats for 82-03 Harley Davidson Sportsters are finally here. We guarantee you won't be disappointed with the quality and the comfort. The current seat turn-around time is 4-6 weeks*

• Made in USA
• Leather or Vinyl
• Black
• Diamond Stitching

Dimensions are as follows:

• 26" overall length
• 3.9" wide at passenger section
• 2" thick foam

These are not made for rigid frames.  They are made for swing arm Sportsters using the stock frame and fender.

Midline Tuck N Roll

Our newest DIY solo seat features a shape aficionado of the classic chopper game will recognize instantly. The nose, side profile and rear kick are classic Bates.

Slim-Line Solo Seat Brown

• Heavy 12 gauge steel base and top grain leather make these solo seats a great addition to your chopper or bobber
• Leather-covered bottom
• 12" long x 9.5" wide
• Spring mount studs are 5/16-18 on 6 3/4" centers
• Available in Black or Brown

11″ SPRING SEAT KIT V-STAR 650 

Mocha Black Diamond

Please note, our seat kit will not work with the stock rear fender.

Your butt is our concern.  We use thick, top of the line genuine leather which makes our seats the best in the business. The 1/8″ 6061 aircraft aluminum pan is curved just right to keep you in place. These aren’t imported seats!!!  We make them right here in Sandy, Utah.  2″ ultimate grade foam is under the plain or laser engraved leather cover.  At 11″ wide, our small seat is very comfortable.  Our mounting brackets are heavy steel or aluminum and powder coated gloss black (to match your frame).   3/8″ diameter holes to mount your rear signal lights are located in the seat brackets.  Every nut and bolt is included. Our installation video, located just above the products, will show how easy it is to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from.  You will have to protect your leather seat from the elements.   No cutting, drilling or welding required.

13” SPRING SEAT KIT VULCAN 800 & 400

Please note, the Blue Collar Bobbers seat kit will not work with the stock rear fender.
Your butt is our concern. We use thick, top of the line genuine leather which makes our seats the best in the business. The 1/8″ 6061 aircraft aluminum pan is curved just right to keep you in place. These aren’t imported seats!!! We make them right here in Sandy, Utah. 2″ ultimate grade foam is under the plain or laser engraved leather cover. At 13″ wide our large seat is very comfortable. It’s the best for longer rides and wider bottoms. Our mounting brackets are heavy steel or aluminum and powder coated gloss black (to match your frame). 3/8″ diameter holes to mount your rear signal lights are located in the seat brackets. Every nut and bolt is included. Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. You will have to protect your leather seat from the elements. No cutting, drilling or welding required.

13” SPRING SEAT KIT VOLUSIA C50

Please note, our seat kit will not work with the stock rear fender.

Your butt is our concern. We use thick, top of the line genuine leather which makes our seats the best in the business.  The 1/8″ 6061 aircraft aluminum pan is curved just right to keep you in place.  These aren’t imported seats!!!  We make them right here in Sandy, Utah.  2″ ultimate grade foam is under the plain or laser engraved leather cover.   At 13″ wide our large seat is very comfortable.  It’s the best for longer rides and wider bottoms.  Our mounting brackets are heavy steel or aluminum and powder coated gloss black (to match your frame).  3/8″ diameter holes to mount your rear signal lights are located in the seat brackets.  Every nut and bolt is included. Our installation video, located just above the products, will show how easy it is to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. You will have to protect your leather seat from the elements.

You will have to cut and remove the original rear fender supports.  No drilling or welding required.

Hardtail Rigid Cobra Seat

TC Bros. Cobra hardtail chopper seats feature quality American construction and timeless looks. Handmade in the USA, these seats are designed to be a perfect fit to the TC Bros. 1982-03 Sportster weld-on hardtails using their mounting kit and fender.

Five 5/16-18 threaded mounts on the heavy 14ga powder coated steel seat pan make it possible to fit these seats to many other hardtail frames as well. Hand stitched from 100% Marine grade vinyl, these seats look like leather but without the maintenance.

Bolt-on some serious style to your bike with this seat!

Available in diamond or pleaded.

PLEASE CONTACT US FOR AVAILABILITY IF INTERESTED IN PURCHASING THIS ITEM.  INFO@PERTHCOUNTYMOTO.COM

Thinline Seat Smooth

 As you may know, if the spring bungs on your chopper frame don’t align with the threaded studs on the bottom of your solo seat, easy installation is practically impossible. Biltwell has addressed this design shortcoming by allowing the carriage bolts on the bottom of this solo seat to slide inside two channels so you can fine-tune their location relative to the bungs on the frame. The Thinline solo seat features a stamped steel pan with raised ribs and Biltwell anvil branding for beauty and strength. Its satin black electroplated finish is both rugged and stylish. The moulded polyurethane foam padding is thin yet comfortable and follows the kicked-up shape of the Thinline pan perfectly to provide support for your backside. This seat is finished off with a heavy-duty black vinyl cover.

Prism x Bates - 8.5" Tuck n' Roll Solo Seat

Here is one part of our limited edition collaboration we have been working on with Bates Leather. These seats are made with the exact same tools the original ones from the 60's were made from. They even consist of a collaborative version of the notable yellow Bates sticker.

Collect it or use it, the choice is yours!

Pairs perfectly with the Prism X Bates P-Pad

Details below:

• Made of leather (black or white)
• Cadmium plated seat pan
• 1" tuck n' roll stitching
• 1" thick foam
• 8.5" width

*** These are not available at wholesale/dealer pricing. If you purchase from your wholesale / dealer account you will be invoiced for retail pricing. 

Tracker Seat Pleated Fits 1986-2003 Sportster

TC Bros. Tracker Sportster seats feature quality construction and are handmade from the finest materials. These seats are designed to be a perfect fit for stock frame 86-03 Harley Davidson Sportster models. (drilling a hole in your rear fender is required).

Just like all of our other seats, these function just as good as they look. They feature sufficient high-density molded foam padding for a comfortable ride while still looking stylish.

Features:

• Heavy-duty injection molded seat pan with durable steel mounting brackets. 
• Hand-stitched from 100% Marine grade vinyl.
• High-density molded foam padding.

Tracker Seat Pleated Fits 1986-2003 Sportster

TC Bros. Tracker Sportster seats feature quality construction and are handmade from the finest materials. These seats are designed to be a perfect fit for stock frame 86-03 Harley Davidson Sportster models. (drilling a hole in your rear fender is required).

Just like all of our other seats, these function just as good as they look. They feature sufficient high-density molded foam padding for a comfortable ride while still looking stylish.

Features:

• Heavy-duty injection molded seat pan with durable steel mounting brackets. 
• Hand-stitched from 100% Marine grade vinyl.
• High-density molded foam padding.

Sportster King & Queen Seat Fits 1994-2003 

TC Bros. King & Queen Sportster seats feature quality construction and timeless looks. Handmade from the finest materials, these seats are designed to be a perfect fit for stock frame 1994-03 Harley Davidson Sportster models.

TC Bros. sissy bars are required to run this seat (sold separately).
Compatible with these TC Bros Sissy Bars
Sissy Bar Chrome

Sissy Bar Black

Kickback Sissy Bar Chrome

Kickback Sissy Bar Black

Heavy 14ga powder-coated steel seat pan. Hand-stitched from 100% Marine-grade semi-gloss vinyl, these seats look like leather but without maintenance.

This listing is for a diamond pleated stitching style. See part #106-0114 if you would prefer pleated stitching. Bolt-on some serious style to your bike with this seat!

Note: These seats can be fit on 1982-1993 Sportster frames as well but you will need to fabricate your own sissy bar. 

Sportster King & Queen Seat Fits 1994-2003 

TC Bros. King & Queen Sportster seats feature quality construction and timeless looks. Handmade from the finest materials, these seats are designed to be a perfect fit for stock frame 1994-03 Harley Davidson Sportster models.

TC Bros. sissy bars are required to run this seat (sold separately).
The compatible with these TC Bros Sissy Bars
Sissy Bar Chrome

Sissy Bar Black

Kickback Sissy Bar Chrome

Kickback Sissy Bar Black

Heavy 14ga powder-coated steel seat pan. Hand-stitched from 100% Marine-grade semi-gloss vinyl, these seats look like leather but without maintenance.

This listing is for a diamond pleated stitching style. See part #106-0114 if you would prefer pleated stitching. Bolt-on some serious style to your bike with this seat!

Note: These seats can be fit on 1982-1993 Sportster frames as well but you will need to fabricate your own sissy bar. 

Solo Seat Weld-On Spring Mounts

Mount your solo seat easily with these weld-on solo seat spring mounts. Made of mild steel, these seat spring mounts easily weld onto any 1" diameter tubing. The base of the mount is contoured to produce a nice finished look. The spring post on the mount has a height of 0.75" and a diameter of .365" to accommodate a variety of spring sizes. Sold as a pair.

Solo Seat/Tail Section for XL

• Transforms a standard XL into a Caf racer
• Seat pan and rear cowling are constructed from fibreglass
• Seat features high-density foam base with a gel insert in the seating area and covered with a black vinyl cover
• Available in a full covered version or partially covered with paintable black gel coat
• Includes mounting hardware and bracket to relocate electronics
• NOTE: Will require removal of the fender, struts/supports from the frame.
• NOTE: Will require relocation and custom mounting of the taillight, turn signals, and license plate mount.

Solo Seat 2 - Smooth

 1/8-inch thick (3mm) stamped steel pan with welded carriage bolts on nose and tail for spring and hinge mounting. One inch thick moulded polyurethane foam padding with a hand-stitched heavy-duty vinyl cover. Four carriage bolts are welded onto the bottom of the pan to facilitate spring and seat hinge mounting. Your frame may require modifications to nose hinge and spring bungs for proper fitment.

Thineline Seat - Diamond

 As you may know, if the spring bungs on your chopper frame don’t align with the threaded studs on the bottom of your solo seat, easy installation is practically impossible. Biltwell has addressed this design shortcoming by allowing the carriage bolts on the bottom of this solo seat to slide inside two channels so you can fine-tune their location relative to the bungs on the frame. The Thinline solo seat features a stamped steel pan with raised ribs and Biltwell anvil branding for beauty and strength. Its satin black electroplated finish is both rugged and stylish. The moulded polyurethane foam padding is thin yet comfortable and follows the kicked-up shape of the Thinline pan perfectly to provide support for your backside. This seat is finished off with a heavy-duty black vinyl cover.