Name: motogadget mo.switch basic
Brand: motogadget
Price: 155.0 CAD
Availability: InStock

motogadget mo.switch basic

$155.00

mo.switch basic 3-button

The mo.switch basic is a universal, high-quality push-button control for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In combination with an electronic push-button control box (not included), these CNC-made push-buttons can switch all electrical units such as lights, indicators, electric starters, horn and much more.

CNC-milled from billet aluminum the housing is anodized in glossy black. Optionally, the button holder (inlay) is also available with a silver anodized colour. The compact housing is equipped with either two or three pushbuttons. All buttons are always in the direction to the driver.

The two or three buttons per unit are always black. A hidden M4 stainless steel mounting screw clamps the housing securely to each handlebar.

The individual buttons are of high quality, very robust and protected against vibrations and splash water (IP65).

Due to sufficient size and ergonomic pressure point (light, mechanical detent), they allow a safe operation - even when operating with a glove.

A single-wire or two-wire wiring is easily possible by two terminals per push-button. One terminal for ground is already provided internally for single-wire wiring. Cable routing in the handlebars is therefore easy.

In case of possible damage, the single push-buttons are available individually and can be replaced.

The mo.switch basic is of course compatible with all common push-button controls such as the mo.unit blue/basic.

Scope of delivery

mo.switch basic billet housing
2 or 3 push-buttons per unit
Manual

motogadget mo.switch basic

$135.00

mo.switch basic 2-button

The mo.switch basic is a universal, high-quality push-button control for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In combination with an electronic push-button control box (not included), these CNC-made push-buttons can switch all electrical units such as lights, indicators, electric starters, horn and much more.

CNC-milled from billet aluminum the housing is anodized in glossy black. Optionally, the button holder (inlay) is also available with a silver anodized colour. The compact housing is equipped with either two or three pushbuttons. All buttons are always in the direction to the driver.

The two or three buttons per unit are always black. A hidden M4 stainless steel mounting screw clamps the housing securely to each handlebar.

The individual buttons are of high quality, very robust and protected against vibrations and splash water (IP65).

Due to sufficient size and ergonomic pressure point (light, mechanical detent), they allow a safe operation - even when operating with a glove.

A single-wire or two-wire wiring is easily possible by two terminals per push-button. One terminal for ground is already provided internally for single-wire wiring. Cable routing in the handlebars is therefore easy.

In case of possible damage, the single push-buttons are available individually and can be replaced.

The mo.switch basic is of course compatible with all common push-button controls such as the mo.unit blue/basic.

Scope of delivery

mo.switch basic billet housing
2 or 3 push-buttons per unit
Manual

Motogadget m.switch 3 button

$160.00

m.switch 3 button

PLEASE NOTE: m.switch 22mm black with 2 and 3 buttons black - ABOUT 6 - 8 WEEKS DELIVERY TIME

New: Now also with 3 push-buttons per unit.

The m.switch is a high-quality universal push-button control for handlebars with 1 in. or 22 mm (7/8 in.) tube diameter in a plain and elegant design.

These finely CNC machined hand controls in combination with an electronic push-button control unit (not included in kit) are used to operate all electrical features, e.g. lights, turn signal, E-Starter, horn, etc.

The casing is made from CNC machined billet aluminum and is available in mirror polished or reflective black finished surfaces respectively.
The compact design casing permits mounting two or more units on one handle bar.

Each unit is equipped with two or three push buttons in black or stainless steel. Different looks matching or contrasting the casing can be combined freely. Two flush built-in M5 stainless steel mounting screws (only one screw on the three-button version) ensure secure and stable clamping of the push-button control to all handle bars.

The push-buttons are of high quality, very robust design and vibration- and spray water-proof (IP65). The adequate size and ergonomic pressure point (easy, mechanical detent) provide for a definite actuation sensing - even when operated with gloves. This feedback allows shifting without the need to check the operation.

Each push-button is equipped with two terminals for an easy optional circuit layout with only one or two cables. The internal ground terminal is already provided for the 'one cable layout'. Therefore, the routing of the cable inside the handle bar can be performed easily.

The push-buttons are available separately and can be replaced if damaged. The m.switch is of course compatible to all common push-button controls, e.g. the m-Unit.

Motogadget m.switch 2 button

$130.00

m.switch 2 button

PLEASE NOTE: m.switch 22mm black with 2 and 3 buttons black - ABOUT 6 - 8 WEEKS DELIVERY TIME

New: Now also with 3 push-buttons per unit.

The m.switch is a high-quality universal push-button control for handlebars with 1 in. or 22 mm (7/8 in.) tube diameter in a plain and elegant design.

These finely CNC machined hand controls in combination with an electronic push-button control unit (not included in the kit) are used to operate all electrical features, e.g. lights, turn signal, E-Starter, horn, etc.

The casing is made from CNC machined billet aluminum and is available in mirror polished or reflective black finished surfaces respectively.
The compact design casing permits mounting two or more units on one handlebar.

Each unit is equipped with two or three push buttons in black or stainless steel. Different looks matching or contrasting the casing can be combined freely. Two flush built-in M5 stainless steel mounting screws (only one screw on the three-button version) ensure secure and stable clamping of the push-button control to all handlebars.

The push-buttons are of high quality, very robust design and vibration- and spray water-proof (IP65). The adequate size and ergonomic pressure point (easy, mechanical detent) provide for a definite actuation sensing - even when operated with gloves. This feedback allows shifting without the need to check the operation.

Each push-button is equipped with two terminals for an easy optional circuit layout with only one or two cables. The internal ground terminal is already provided for the 'one cable layout'. Therefore, the routing of the cable inside the handlebar can be performed easily.

The push buttons are available separately and can be replaced if damaged. The m.switch is of course compatible with all common push-button controls, e.g. the m-Unit.

Motogadget m.switch mini

$199.95

m.switch mini

The m.switch mini is a high-quality universal push-button control for handle bars with 1 in. or 22 mm (7/8 in.) tube diameter in a plain and elegant design.

These finely CNC machined hand controls in combination with an electronic push-button control unit (NOT INCLUDED IN KIT) are used to operate all electrical features, e.g. lights, turn signal, E-Starter, horn, etc.

The casing is made from CNC-machined billet aluminum and is available in mirror-polished or black-finished surfaces respectively. Two flush built-in M5 stainless steel mounting screws ensure secure and stable clamping of the push-button control to all handlebars.

The push-buttons are of high quality, very robust design, and are vibration- and spray water-proof (IP65).

The m.switch mini is of course compatible with all common push-button controls, e.g. the m-Unit.

Specifications and features

Inner diameter	22 mm or 1 Inch
Outer diameter	45 mm
Width	14 mm
Length of cable	200 mm

Drag Specialties Mini Push Button Switch - Polished

$17.95

Mini Push Button Switch - Polished

12mm round stainless push-button switch includes a special radious-shaped spacer to allowing mounting in handlebars
Great for turn-signal, starter, horn, stop or high-low operations (must be used with a relay)
Includes two 20" wires; installing requires a 9/32" drill and 5/16" UNF tap
Sold each

Drag Specialties Mini Push Button Switch - Black

$16.95

Mini Push Button Switch - Black

12mm round stainless push-button switch includes a special radious-shaped spacer to allowing mounting in handlebars
Great for turn-signal, starter, horn, stop or high-low operations (must be used with a relay)
Includes two 20" wires; installing requires a 9/32" drill and 5/16" UNF tap
Sold each

Wyatt Gatling Chrome Dual Handlebar Button Switch Kit

Wyatt Gatling Chrome Dual Handlebar Button Switch Kit

$97.00

Chrome Dual Handlebar Button Switch Kit

This CNC machined chrome handlebar mounted dual microswitch can be used to operate horns, kill switch, turn signals, starter relay, or just about anything you can think of! Compact design keeps your bars tidy. This switch is set up to run wiring through your handlebars. This switch housing requires drilling your handlebars. (Note: use relays for high current loads such as starter)

Replica Harley-Davidson '38-'63 Spot Lamp Switch

$57.32

Replica Spot Lamp Switch

This is a Replica spot lamp switch set for 1938-1963 spot lamp units.

Set of 2
Fits: EL 1938-1940 FL 1941-1963

Kustom Tech - Micro Switch Clamp - Black

Kustom Tech - Micro Switch Clamp - Black

$104.95

Micro Switch Clamp - Black Aluminum

Simplify your controls that much more with this clamp that fits into your Kustom Tech controls. Even less clutter on your handlebars! From forged aluminum, this clamp with microswitch fits all Deluxe line and Classic line master cylinder and clutch/brake lever assembly.

Kustom Tech - Micro Switch Clamp - Raw Aluminum

Kustom Tech - Micro Switch Clamp - Raw Aluminum

$104.95

Micro Switch Clamp - Raw Aluminum

Simplify your controls that much more with this clamp that fits into your Kustom Tech controls. Even less clutter on your handlebars! From forged aluminum, this clamp with microswitch fits all Deluxe line and Classic line master cylinder and clutch/brake lever assembly.

Kustom Tech - Two Switch Housing

$143.95

Two Switch Housing - Raw Brass

Clean and simple. These forged switch housings are as minimalist as it gets while style offering a touch of style. It can be used for many applications. Designed with external fins to match perfectly our Deluxe and Classic line handlebar control, or all early style handlebar projects.

fits 1" and 7/8" bars

Goodridge - Banjo Bolt Brake Switch 3/8"-24 Threads

$31.95

Banjo Bolt Brake Switch 3/8"-24 Threads

Brake line banjo bolt with built-in hydraulic brake light switch. 3/8"-24 thread. Mounts directly to the master cylinder through the brake line banjo fitting. Eliminates the conventional brake tee fitting that is required to mount the standard brake light switch. Simplifies the installation of custom length brake lines. Switch has normally open electrical contacts (no electrical current flow until actuated by hydraulic pressure).

motogadget mo.switch basic LED

$197.00

mo.switch basic LED 3-button

The mo.switch basic LED is a universal, high-quality pushbutton fitting for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In conjunction with an electronic pushbutton control (not included), these CNC-manufactured pushbutton fittings can switch all electrical units such as lights, turn signals, e-starters, horns and much more.

CNC machined from billet aluminum, the housing is anodized in gloss black.

The individual pushbuttons are of high quality, very robust and protected against vibration and splash water (IP65).

Due to sufficient size and ergonomic pressure point (light, mechanical detent), they enable a safe switching feeling during operation - even when operated with a glove.

Due to two connections per pushbutton, a one-wire or two-wire circuit is easily possible. A connection for ground is already provided internally for the one-wire circuit. A cable routing in the handlebar is therefore easy to perform.

In case of possible damage, the probes are available individually and are replaceable.

Scope of delivery

mo.switch basic aluminum housing
2 or 3 high quality pushbuttons per unit
QR code for mounting and operating instructions

Technical Data

Inner diameter: 22 mm and 1 inch
Outer diameter housing: approx. 45 mm
Width: 2 styli 22 mm, 3 styli 42.5 mm
Pushbutton completely wired
high quality connection cable with 1,8m length
LED illuminated buttons
high quality CNC milled from solid material and anodized UV resistant
Housing color black, button black, button LED color white
maximum pushbutton switching current: 1A, all pushbuttons switch to ground
additional switching electronics mo.unit required

motogadget mo.switch basic LED

$179.95

mo.switch basic LED 2-button

The mo.switch basic LED is a universal, high-quality pushbutton fitting for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In conjunction with an electronic pushbutton control (not included), these CNC-manufactured pushbutton fittings can switch all electrical units such as lights, turn signals, e-starters, horns and much more.

CNC machined from billet aluminum, the housing is anodized in gloss black.

The individual pushbuttons are of high quality, very robust and protected against vibration and splash water (IP65).

Due to sufficient size and ergonomic pressure point (light, mechanical detent), they enable a safe switching feeling during operation - even when operated with a glove.

Due to two connections per pushbutton, a one-wire or two-wire circuit is easily possible. A connection for ground is already provided internally for the one-wire circuit. A cable routing in the handlebar is therefore easy to perform.

In case of possible damage, the probes are available individually and are replaceable.

Technical Specs

Inner diameter: 22 mm and 1 inch
Outer diameter housing: approx. 45 mm
Width: 2 styli 22 mm, 3 styli 42.5 mm
Pushbutton completely wired
high quality connection cable with 1,8m length
LED illuminated buttons
high quality CNC milled from solid material and anodized UV resistant
Housing color black, button black, button LED color white
Maximum pushbutton switching current: 1A, all pushbuttons switch to ground
Additional switching electronics mo.unit required

Scope of Delivery

mo.switch basic aluminum housing
2 or 3 high quality pushbuttons per unit
QR code for mounting and operating instructions

motogadget mo.switch pro

$309.95

mo.switch pro

The mo.switch pro is our flagship product. A universal, high-quality switch fitting suitable for handlebar diameters of 22.2 mm or 25.4 mm.

The left-hand pushbutton panel is designed as a complete solution and includes all standard pushbuttons required to control the vehicle.

CNC machined from billet aluminum, the housing is black anodized. A hidden M4 stainless steel mounting screw clamps the unit securely to the handlebar.

The two-part design in clamp housing and stylus inlay makes mounting child's play. The supplied handlebar adapter acts here as a drilling template.

The mo.switch pro is "ready to connect". Everything has already been completely wired, as we have already carried out the time-consuming connection of the individual buttons with the respective LED lighting.

The pushbutton unit is waterproof molded on the back and equipped with a highly flexible, black, 8-core cable.

The 1.8m cable is specially manufactured to our specifications, has a low cross-section and is perfect for routing through a handlebar.

The pushbuttons used are of high quality, vibration resistant and jet water protected according to IP65. The button size and the ergonomic pressure point give an optimal switching feeling when operating with gloves.

Technical Data

Pushbutton unit pre-wired and waterproof encapsulated
High quality connection cable with 1.8m length
Jet water resistant according to IP65
Ring-shaped LED illumination of the individual buttons
Button functions: Horn | High beam | Turn signal left & right | Starter | Instrument
Clean look without visible screws
Easy mounting without wiring of individual pushbuttons
Suitable for handlebar diameter 22.2mm (7/8") or 25.4mm (1")
High quality CNC milled from aircraft aluminum and UV resistant anodized
Housing color black, button black, button LED colors red, green, blue, white, yellow
Maximum pushbutton switching current: 1A, all pushbuttons switch to ground
Additional switching electronics mo.unit required
Height 48mm, width 36mm, depth 58mm

Scope of delivery

Pushbutton unit with 1.8m connection cable
Mounting screws