Brake Light

Box Chopper Tail Light

This is the Prism version of the old style "Chopper Box light." It's equipped with a dual function LED cluster that acts as both a brake light and running light. The size of the Prism version housing is 4-1/4" long X 3/4" wide X 2-1/8" in height  while the size of the original style is 4-1/4" long 2" wide and 2" in height. The wires exit through the back of the housing. The housing is made of aluminum which gives you the option for polish, chrome, powdercoat or just leave raw.

All lights come with a two stainless steel 1/4-28 bolts spaced 3.5" apart for mounting.

Ripple Tail Light (Weld-On)

These tail lights are perfect for that weld-on application.  Works great welded to a sissy bar moulded to a frame or welded to a license bracket.

These dual-function 1.25" LEDs act as a brake light and running light. The size of the housing is 1 7/8"  diameter x 1" long.

Stainless or mild steel options are available. 

Will come with flat and dome lens.

Ripple Tail Light

These dual-function 1.25" LED's act as a brake light and running light. The size of the housing is 1 7/8"  diameter x 1" long. All lights come with two 1/4" bolts for mounting and one universal bracket.

Weld-On Flat Tail Light

These tail lights are perfect for that weld-on application.  Works great welded to a sissy bar moulded to a frame or welded to a license bracket.

These dual-function 1.25" LED's act as a brake light and running light. The size of the housing is 1.5" diameter x 4/5" long.

TC Bros. 2 Inch Round Bobber Side Mount Tail Light/License Plate Bracket

Our unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut mounting holes in the bracket. We also include two different mounting brackets so you can either bolt this bracket to your axle or weld the included raw steel slug anywhere on your frame and clamp it to that. The axle mount hole is .787" diameter so this can be used on Harleys with 3/4" axles and Metric bikes with 20mm axles. This is the most versatile bracket on the market! Your mounting options and license plate positions can be mixed and matched to give you the unique look that you are going for. Also included in the kit is the self grounding 12 Volt Brake/Tail Lamp/License Plate light with automotive style bulbs. The bracket is powdercoated gloss black and comes with stainless steel button head bolts/nuts. ALL STEEL BRACKETS ARE MADE IN USA!

TC Bros. Model A Side Mount Tail Light/License Plate

TC Bros. Side Mount License Plate/Tail Light Bracket (12-volt tail light included). Our unique, bolt-together design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike. Kit includes three different mounting brackets making it the most universal design available. You can bolt this bracket to your axle, shock, or weld the included raw steel slug anywhere on your frame and clamp it to that. The axle mount hole is .787" diameter, which is compatible with Harley's with 3/4" axles and Metric bikes with up to 20mm axles. TC Bros. exclusive Hardtail-Proof™ rubber mounting system isolates the tail light from vibration, even in the most demanding rigid frame applications. This ensures reliable operation and longer bulb life. Kit includes dual filament 12 Volt Brake/Tail Lamp with License Plate Light.The brackets are powder coated gloss black and include stainless steel button head hardware. ALL STEEL BRACKETS ARE MADE IN USA!

mo.blaze tens3

Protron Run, Brake, Turn Signals

The Highsider Proton Two Turn Signals are packed with run, turn, and brake functions. Smoked lens. Mounting is made easy with the built-in 8mm mounting stud. Small, smaller, HIGHSIDER PROTON –

With a Highsider Proton turn signal, the lighting on the motorcycle can virtually disappear visually. This indicator is only noticeable when it really has to be. The trend towards ever smaller lighting elements makes it possible to give the bike a cool and clean look E-approved. For rear use.

Dimensions:
A Diameter: .43″ (11mm)
B Width: .47″ (12mm)
Depth: .63″ (16mm)
Thread: M8 x 18 mm Weight: .044 lb (20 g)

Connections:
Yellow = taillight (+)
Red = brake light (+)
Brown = turn signal (+)
Black = ground (-)

Scope of delivery: 1 pair.

Ford "Stop" Duolamp Model A Stainless Steel Tail Light

TC Bros. Polished stainless steel 12V Ford "STOP" Duolamp reproduction tail light with red glass lens. Light features both a brake/running light as well as a License plate light to illuminate your plate at night. The two wire hook-up for the brake and tail lights mean this light is self grounding through its housing. The black wire is the 12V positive running light hookup. The green wire is the 12V positive brake light hookup. Light features standard automotive style bulbs (#1156 for Brake Light, and #67 miniature for Running Light). Replacement bulbs are easily sourced from local autoparts stores should you ever require. These lights measure 3 3/4" in diameter, 2 1/4" deep. The mounting studs are 1 3/4" center to center. Great light for your old school bobber or chopper! Note: For best results on high-vibration applications, isolate the tail light mount with rubber grommets.

33 Ford Replica Tail Light Polished Stainless Steel

TC Bros. 12V Ford Replica Tail Light with polished stainless housing and red glass lens. Light features both a brake/running light as well as a License plate light to illuminate your plate at night. The two wire hook-up for the brake and tail lights mean this light is self grounding through its housing. The black wire is the 12V positive running light hookup. The green wire is the 12V positive brake light hookup. This light uses a standard incandescent automotive 1157 bulb (included). These lights measure 3 3/4" in diameter, 2 1/4" deep. The mounting studs are 1 3/4" center to center. Great light for your old school bobber or chopper! Note: For best results on high-vibration applications, isolate the tail light mount with rubber grommets 

LED 33 Ford Replica Tail Light

Super Bright LED Black 33 Ford Replica Tail Light. A great old school look with the use of modern LED technology! A great old school look with the use of modern LED technology! LED bulb is brighter, more durable, and uses much less power than traditional incandescent bulbs! Light features both a brake/running light as well as a license plate light to illuminate your plate at night. These lights measure 3 3/4" in diameter, 2 1/4" deep. The mounting studs are 1 3/4" center to center. Great light for your old school bobber or chopper! Note: For best results on high-vibration applications, isolate the tail light mount with rubber grommets.

Ford Duolamp Model A Stainless Steel Tail Light

TC Bros. Polished stainless steel 12V Ford Duolamp reproduction tail light with red glass lens. The light features both a brake/running light as well as a License plate light to illuminate your plate at night. The two-wire hook-up for the brake and tail lights means this light is self-grounding through its housing. The black wire is the 12V positive running light hookup. The green wire is the 12V positive brake light hookup. Light features standard automotive-style bulbs (#1156 for Brake Light, and #67 miniature for Running Light). Replacement bulbs are easily sourced from local auto parts stores should you ever require. These lights measure 3 3/4" in diameter, 2 1/4" deep. The mounting studs are 1 3/4" center to center. Great light for your old school bobber or chopper! Note: For best results on high-vibration applications, isolate the tail light mount with rubber grommets.

Truflex Integrated LED Light Bar

• Multiple TruFLEX® strips built into one housing to handle integrated run/brake/turn applications
• Contains 10 amber left and right turn signals
• Offers enhanced display with 20 red run and brake dual intensity LEDs
• Includes smoke tube
• Measures 5.7"

50's Style Bullet Taillight - Chrome

• Features die-cast construction with a 12V dual-filament bulb
• Smooth contour matches most rear fenders
• Comes with license plate mounting tab
• Not DOT or ECE compliant

50's Style Bullet Taillight - Black

• Features die-cast construction with a 12V dual-filament bulb
• Smooth contour matches most rear fenders
• Comes with license plate mounting tab
• Not DOT or ECE compliant

Universal Bobber Tail Light

• Features die-cast construction with chrome finish
• 12v dual-filament tail/brake light with red lens; uses 1157 style bulb
• Requires custom mounting, hardware included
• Measures approximately 2 1/8" diameter and 3" long body
• ECE compliant (not DOT compliant)

LED Tob Stone Tail Light With License Plate Bracket

• Chrome housing with red lens and top tag light
• Includes top license plate mount
• Lens measures 4 5/8" x 2 1/2"
• Dual function LED
• 4.5" on centre mounting holes
• Not DOT or ECE compliant

Bobber LED Taillight License Plate Bracket - Chrome

• 12-volt dual-function LED design with tag light
• Available in chrome or black finish
• Includes mounting hardware, mounts to existing three holes license plate bracket mounting holes on most FXD and XL models with conventional license plate mount
• ECE compliant (not DOT compliant)