TC Bros Ford Model A Tail Light
TC Bros Ford Model A Tail Light
TC Bros Ford Model A Tail Light
TC Bros Ford Model A Tail Light

TC Bros Ford Model A Tail Light

$97.95

Ford Duolamp Model A Stainless Steel Tail Light

TC Bros. Polished stainless steel 12V Ford Duolamp reproduction tail light with red glass lens. The light features both a brake/running light as well as a License plate light to illuminate your plate at night. The two-wire hook-up for the brake and tail lights means this light is self-grounding through its housing. The black wire is the 12V positive running light hookup. The green wire is the 12V positive brake light hookup. Light features standard automotive-style bulbs (#1156 for Brake Light, and #67 miniature for Running Light). Replacement bulbs are easily sourced from local auto parts stores should you ever require. These lights measure 3 3/4" in diameter, 2 1/4" deep. The mounting studs are 1 3/4" center to center. Great light for your old school bobber or chopper! Note: For best results on high-vibration applications, isolate the tail light mount with rubber grommets.

You may also like

SALE
Quick view
Prism Supply Co. Box Chopper Tail Light
$245.00 $229.95
Quick view
Prism Supply Co Weld-On Flat Tail Light
from $175.00
Quick view
Motogadget mo.blaze tens3
$164.95
Quick view
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
$229.95
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light
Prism Supply Co. Box Chopper Tail Light

Prism Supply Co. Box Chopper Tail Light

$245.00 $229.95

The Prism Supply Co. Box Chopper Tail Light is a modern LED take on the classic old-school chopper box light — slimmer than the original and built from aluminum so you can polish, chrome, powdercoat, or leave it raw to match your build.

Equipped with a dual-function LED cluster that handles both running and brake light duties, it wires cleanly through the back of the housing for a tidy install.

Specifications

  • Housing: 4-1/4" L x 3/4" W x 2-1/8" H (original style: 4-1/4" x 2" x 2")
  • Dual-function LED cluster — running & brake light
  • Wires exit through rear of housing
  • Aluminum housing — polish, chrome, powdercoat, or raw finish options
  • Includes two stainless steel 1/4-28 mounting bolts, spaced 3.5" apart

Available Finishes

  • Brushed Aluminum
  • Polished Aluminum

Compatibility

Designed for custom choppers and bobbers. The slimmer profile compared to the original makes it ideal for tight tail section builds.

Prism Supply Co Weld-On Flat Tail Light
Prism Supply Co Weld-On Flat Tail Light
Prism Supply Co Weld-On Flat Tail Light
Prism Supply Co Weld-On Flat Tail Light
Prism Supply Co Weld-On Flat Tail Light
Prism Supply Co Weld-On Flat Tail Light
Prism Supply Co Weld-On Flat Tail Light
Prism Supply Co Weld-On Flat Tail Light

Prism Supply Co Weld-On Flat Tail Light

$185.00

Weld-On Flat Tail Light

These tail lights are perfect for that weld-on application.  Works great welded to a sissy bar moulded to a frame or welded to a license bracket.

These dual-function 1.25" LED's act as a brake light and running light. The size of the housing is 1.5" diameter x 4/5" long.

Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3
Motogadget mo.blaze tens3

Motogadget mo.blaze tens3

$164.95

mo.blaze tens3

The mo.blaze tens3 from motogadget is the smallest 3in1 indicator in the world. It is a turn signal, taillight and brake light in one light element at the same time.

Its tiny dimensions and the reduced design make it almost disappear on the vehicle. As soon as it lights up, thanks to the IntensiLED® Technology, it is extremely bright and definitely cannot be overlooked.

At the same time, the additional side beam angle ensures the best visibility and safety.

The add-on indicator has ECE approval as a rear direction indicator/taillight / brake light. The aluminum housing is CNC milled and available in black anodized or high-gloss polished versions.

The flasher can be operated like any common LED flasher with load resistors or our load-independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay +). To match the mo.blaze tens3, we offer the mo.blaze tens4 as an indicator with a position light for the front.

benefits

  • extremely small aluminum housing
  • ECE approval, no registration or similar necessary
  • increased visibility and safety thanks to an additional side beam angle
  • maximum luminosity thanks to the latest high-performance LED technology (IntensiLED®)
  • Electronic voltage conditioning through 330kHz clocked, IC-controlled constant current source and safe protection electronics
  • the fastening thread is standard M8. Therefore no mounting adapter or special heat sink nuts are necessary

scope of delivery

  • Single 3in1 mo.blaze tens3 turn signal with M8 thread
  • Nut M8
  • 4 push-lock cable connectors
  • installation Guide


Please order two 3in1 indicators for use as a rear pair.

Specifications and features

Total length with thread 29 mm
Length without attachment thread 11 mm
Largest diameter 11 mm
Cable length approx. 110 cm
Weight with cable approx. 20 g
Attachment M8 threaded bolt
Power consumption approx. 1/2/3 watt
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style
Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style

Prism Supply Co. PS-41 Tail Light — Panhead & Ironhead Style

$229.95

The Prism Supply Co. PS-41 Tail Light is a precision-crafted, modern LED interpretation of the iconic RH-55 Guide Light that originally graced Panheads and Ironheads. At 30% smaller than the original, it delivers that unmistakable vintage silhouette in a compact, waterproof package — built to last and designed to turn heads.

What's Included

  • Aluminum housing — available in Brushed or Polished finish
  • Injection-molded Prism Supply lens
  • Dual-brightness 1.85" diameter waterproof LED (running & brake)
  • Stainless steel mounting hardware

Specifications

  • Overall dimensions: 3.375" x 2.5" x 1" thick
  • 30% smaller than the original RH-55 Guide Light
  • Waterproof LED — suitable for all weather riding

Compatibility

Designed to complement classic Harley-Davidson Panhead and Ironhead builds. A natural fit for custom choppers and bobbers seeking a period-correct tail light with modern reliability.

K & S LED License Plate Mounting Bolts

K & S LED License Plate Mounting Bolts

$53.95

LED License Plate Mounting Bolts - Chrome

These License plate bolts are a discrete option to illuminated your license plate. Perfect for those who are running a tail light without plate light or has their plate mounted in a separate location from their tail light. 

Features:

  • License plate mounting bolts in a hex shape
  • LEDs flash - great for wiring to brake lights
  • Available in stainless steel or black finished stainless steel
  • LED colour -white

Note: Not for use where DOT lighting is required

Measurements:

14 mm dia., 28 mm W

Back to Brake Light