TJ Brutal Customs Jockey Shifter and Suicide Clutch Kit - VT600 - All Years

TJ Brutal Customs Jockey Shifter and Suicide Clutch Kit - VT600 - All Years

Name: TJ Brutal Customs Jockey Shifter and Suicide Clutch Kit - VT600 - All Years
Brand: TJ Brutal Customs
Price: 530.0 CAD
Availability: InStock

$530.00

Quantity

Jockey Shifter and Suicide Clutch Kit - VT600 - All Years

The BOLT-ON Jockey Shifter and Suicide Clutch Kit for the Honda Shadow VT600, VLX600 is the first of its kind to be produced for the Honda Shadow motorcycle!

Fits:

Honda Shadow VT600 1988 - 2007

The Jockey Shift and Suicide Clutch Kit for bobbers and choppers is a breeze to install, requiring zero fabrication, you will only need a few wrenches, and some allen/hex keys to get your bike rolling! The Aluminum Shift knob is threaded at 3/8-16". This is an amazing upgrade for your Honda Shadow!

You can use your stock clutch cable or pick up a 2" shorter clutch cable! The kit will come partially assembled, you will need to use Loctite and adjust everything before you ride. Tighten the Jockey Shift set screws down tightly!

Each Suicide Clutch Kit will include a replacement forward engine mount bolt and 3 stainless cap head screws to bolt the clutch backing plate to your stator case! Jockey Shifters will include the adapter, arm, hardware, and TJ Brutal Customs aluminum shift knob which threads onto the shifter arm.

**Note: Please use loc-tite on all threads before riding. For case, bolts use anti- seize**

The Suicide Clutch Kit DOES NOT fit the VT750, however, the Jockey Shifter arm will.

Check out the video for a simple step-by-step install!

Holey Shifter Pegs & Brake Pegs - Honda Shadow

Made with the Honda Shadow in mind but will fit many other motorcycles!

Specs:

2.25" long
7/8" Diameter
Includes mounting bolt
Pegs are sold individually. For a set of pegs, purchase a quantity of two when you checkout.

To install on a Honda Shadow, you will need to cut off the existing shifter or brake peg and drill a 8mm hole in the shifter arm. Then use the included bolt to bolt the peg on. Make sure you use Loc-tite on the bolt threads!

With a drill and a hacksaw this whole process takes about 10 minutes tops. A cutoff wheel in an angle grinder makes the whole process a lot faster. Don't chop off your fingers!

Aluminum pegs are crafted from 6061A aircraft grade Aluminum and the black pegs are Anodized.

Brass pegs are crafted from C 36000 machinable Brass

Some models may require more fabrication to fit.

Sold Each. Not in pairs.

This is for the purchase of a peg only. The video is for example purposes and shows other pieces which are not included