Name: PCM Coffee or Death Sticker
Brand: Perth County Moto
Price: 4.95 CAD
Availability: InStock

PCM Coffee or Death Sticker

$4.95

PCM Coffee or Death Sticker

The name says it all. Give me coffee or give me death! This sticker is ready to go and is super sticky. Slap it onto your favorite helmet, toolbox, travel mug, or wherever!

3" T x 2.3" W
Matte finish
Easy peel backing

My Other Car Bumper Sticker

$4.95

My Other Car Bumper Sticker

Those who know, know. Motorcycles are like Lay's, you can't have just one! And so the list of project bikes begins

8.5" x 2.75"

motogadget mo.switch basic

$165.00

mo.switch basic 3-button

The mo.switch basic is a universal, high-quality push-button control for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In combination with an electronic push-button control box (not included), these CNC-made push-buttons can switch all electrical units such as lights, indicators, electric starters, horn and much more.

CNC-milled from billet aluminum the housing is anodized in glossy black. Optionally, the button holder (inlay) is also available with a silver anodized colour. The compact housing is equipped with either two or three pushbuttons. All buttons are always in the direction to the driver.

The two or three buttons per unit are always black. A hidden M4 stainless steel mounting screw clamps the housing securely to each handlebar.

The individual buttons are of high quality, very robust and protected against vibrations and splash water (IP65).

Due to sufficient size and ergonomic pressure point (light, mechanical detent), they allow a safe operation - even when operating with a glove.

A single-wire or two-wire wiring is easily possible by two terminals per push-button. One terminal for ground is already provided internally for single-wire wiring. Cable routing in the handlebars is therefore easy.

In case of possible damage, the single push-buttons are available individually and can be replaced.

The mo.switch basic is of course compatible with all common push-button controls such as the mo.unit blue/basic.

Scope of delivery

mo.switch basic billet housing
2 or 3 push-buttons per unit
Manual

Ram Mounts X-Grip with Tough-Claw - Large Size

Ram Mounts X-Grip with Tough-Claw - Large Size

$113.95

X-Grip with Touch-Claw

The RAM-HOL-UN10-400U consists of the small Tough-Claw^™ base and universal X-Grip^® cradle for large phones and phablets. The X-Grip^® cradle has a clean and clever four-leg design that sports great holding power without hiding your smartphone behind foam pads and plastic. The X-Grip^® cradle expands and contracts for the perfect fit of most smartphones. This mount rotates 360 degrees.

The X-Grip^® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions:

Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"

Clamping Range:

Rail/Tube Surfaces: 0.625" to 1.5"
Flat Surfaces: 0" to 1.14"

Features:

Rustproof
High strength composite and stainless steel construction
Spring-loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold the device firm and stable
Socket technology allows for multiple adjustment angles and articulation of the device
Includes Tether for open cockpit and extreme environments
Lifetime warranty

Material: High Strength Composite & Stainless Steel
Note: The "U" in the part number reflects the product packaged in a poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
Weight:0.51 lbs.

You can find replacement X-Grip Post Caps here and Tethers here

Go Fast Innovations JIS Screwdriver Set

$47.95

JIS Screw Driver Set

If your riding a metric motorcycle then this screwdriver set is a must-have. Stop stripping the screws on your motorcycle. They might look like Phillips heads but they're not!

Add a socket or wrench to the back of this screwdriver and get a little extra leverage for those difficult screws. You can also confidently hit the back of these drivers with a hammer confidently! They have a lifetime warranty!

Each set contains the following:

1-JIS style screwdriver-size #1 with a 75mm shaft, perfect for those little screws on handlebar switches, electrics, etc
1-JIS style screwdriver-size #2 with a 100mm shaft, our most versatile, great for all carb screws, etc
1-JIS style screwdriver-size #3 with a 150mm shaft, fits all those larger screws found on the engine cases and bodywork.
When you receive your Go fast Innovations JIS screwdriver set and open the box, you will find the best set and maybe the last set of screwdrivers you will ever buy. That’s because JIS screwdrivers fit most Phillips screws too.

Prism Supply Co Vintage Safety Glasses

$47.00

Vintage Safety Glasses - Clear

Vintage-inspired safety glasses Contain side shields to keep bugs, metal, wood, etc. out of your eyes Lenses and frames are made of plastic. Meets ANSI Z87.1 Safety Standards. If you're looking for tinted safety glasses click here. If you are looking for green safety glasses click here.

"I wear these myself in the garage but also as riding glasses and I love them!" - Jeff

Goldtop England The Silk Lined Viceroy Gloves - Black

Goldtop England The Silk Lined Viceroy Gloves - Black

$129.95

The Silk Lined Viceroy Gloves - Black

The Goldtop England short armoured motorcycle gloves are a truly unique pair of gloves, combining the luxury of silk with the durability of leather, resulting in a tighter fitting pair of gloves designed for ultimate comfort and protection when riding.

A hybrid half-silk, the half-unlined internal design ensures that these gloves keep you cool on hotter days without becoming sticky and uncomfortable on longer rides, thanks to the addition of beautiful silk between the back of your hand and the glove itself.

Protection is provided through a comfort-driven "floating" armoured knuckle, gel-padded fingers and a reinforced palm and finger/thumb area, and with double stitching at all major stress points. These gloves are built to last, whilst your fit is secured in place whilst riding thanks to a ribbed, wrap-around velcro strap. Perforations, in addition to the silk lining, keep you cool, making these perfect for hot weather, Summer riding on or off-road!

Supplement your gloves with Goldtop Water Repellent Ducks Wax in order to give these gloves a darker, richer look and feel. The Water Repellent Ducks Wax will also help preserve and maintain these gloves, whilst keeping most of the water out, but with these being perforated gloves....it sure won't keep it all out!

Don't forget a jar of Goldtop Water Repellant Balm to keep and protect these gloves

PRODUCT INFO

1.0 mm hand-waxed aniline cowhide leather
Single hide palm and perforated rear styling and no split fingers!
Floating knuckle design for ultimate comfort on longer journeys
Hybrid unlined palm with a 100% silk lined upper section
Reinforced lower palm and finger/thumb
Ribbed velcro fastening
5 strand cotton thread stitching throughout

Brixton Brood Snap Cap - Brown/Khaki

$50.00

Brood Snap Cap - Brown/Khaki

A men's unisex eight-panel cut-and-sew herringbone snap cap with custom lining and a metal Brixton B-shield.

HEADWEAR SIZE CHART

All of Brixton’s Men's and Women's caps, brimmed hats and fedoras are sized based upon the measurements indicated below.

Please note that the fit of each hat may vary slightly due to hat style, materials, brim stiffness, etc. There is no “correct” fit or way to wear our hats. Each individual will have a unique size and shaped head and we offer a range of sizes & styles to accommodate this.

Size	Standard Hat Sizing	Centimeters	Inches
Extra-Small	6¾	54	21¼
Small	7	56	22
Medium	7¼	58	22⅘
Large	7½	60	23⅗
Extra-Large	7¾	62	24⅖

Biltwell Gringo/Gringo S - Cheek Pads ECE R22.05

$22.95

Gringo/Gringo S Cheek Pads

Replace those old cheek pads or fine tune the fit of your helmet with smaller or larger cheek pads.

These are for ECE R22.05 Gringo and Gringo S helmets.

PCM Oak Leaf Sticker

$4.95

PCM Oak Leaf Sticker

A play on a classic. This sticker is ready to go and is super sticky. Slap it onto your favorite helmet, tool box, travel mug, or where ever!

3.25" T x 2.5" W
Matte finish
Easy peel backing

Dice Magazine - FTLR Patch

$10.00

Fuck This Let's Ride Chainstitch Patch II

This Dice patch says it all

Design by D. Sharidan

John Doe Taylor Mono - Used Black

$379.00

TAYLOR MONO

Taylor Monolayer gives you AAA certified jeans in monolayer fabric design,
as the name suggests, for a cool and comfortable wearing experience on a hot day.

The design is based on a special weaving process that combines denim fabric with XTM-Fiber®.
In combination with the knee and hip protectors, this will protect you
from anything you might encounter on the road.

Taylor Monolayer has a standard-fit classical five-pocket style and enough stretch
in the fabric to ensure excellent wearing comfort.

Material and details:

CE certification: AAA (EN17092-2:2020)
Monolayer design XTM-Fiber® and stretch denim twill blend
XTM protector-ready Integrated height-adjustable knee
protector pockets Integrated hip protector pockets
Level 1 knee and hip protectors included
Water-repellent and breathable
Multi stretch comfort
Five-pocket denim style
Strap for gloves and keys
YKK zipper
Straight fit, standard leg – straight cut

Motogadget mo.blaze disc

$160.00

mo.blaze disc

mo.blaze disc by motogadget – a turn signal for handlebar end installation in a trend-setting design.

The mo.blaze disc is the latest generation of turn signal lights. The characteristic feature of the LED turn signal is the transparent light-emitting disc on a compact aluminum base providing the harmonious finish of the handlebar end.

This is already the third generation of our turn signals using the motogadget TranzLight-Technology® (TLT, patent pending). This progressive approach to development is not limited to the miniaturization of turn signal casings. Furthermore, it creates new lighting concepts directly through a crystal-like plastic body. Only the precision of CAD calculations and state-of-the-art manufacturing processes allow this new design and its performance opportunities.

The luminous flux required for the TranzLight technology is generated by the intensiLED® procedure developed by motogadget. It consists of three important pillars:

Specifically selected, high output LED with maximum efficiency and 7W total output and a service life of more than 50,000 hours.
IC controlled constant power source with 330 kHz pulses.
Special collimator optics precisely bundles the emission light from the LED into the plastic body.

The subtle aluminum casing is used for the secure mount of the plastic body only and includes the electronic control system and high-end LEDs. Traditionally, the casing is machined using CNC technology, available with an anodized black or mirror polish surface, and furnished with an elegant finish of laser inscriptions.

The turn signal for handlebar end installation has a very low construction height and, due to the transparent disc, the m.blaze shows up with a very neutral and subtle look. That's why the m.blaze is the perfect match for many styles and all types of motorbikes.

Like any other conventional LED turn signal, the turn signal kit can be operated with load resistors or any of our load-independent flasher relays (m.flash, m.wave, m.stop, m.relais+).

The m.blaze disc has an E mark and front turn signal approval.

Always make sure to order a complete set consisting of the left and right-side turn signal assembly

Advantages

Completely unique, discrete design and functionality
Barely recognizable on handlebar when OFF
Extremely bright light to the front side, well-recognizable light output to the rear side
State-of-the-art, high-performance LED technology called IntensiLED
Electronic voltage conditioning and secure protection circuits
No need for turn signal indicator lights
Quite a harmonious finish for the handlebar end - especially when equipped with m-grip or other billet grips.

Specifications and features

Diameter	35 mm
Overall length	68 mm
Partial length outside handlebar	20 mm
Partial length inside handlebar	48 mm
Cable length	ca. 100 cm
Weight	approx. 40 g
Mounting	Delivered with rubber clamping parts for steel and aluminum handlebars (22 mm and 1 in.) with 14 mm to 21 mm I.D.
Power consumption	approx. 7 Watt

Goldtop England Short Cuff Bobber - Waxed Tan

Goldtop England Short Cuff Bobber - Waxed Tan

$119.95

The Short Cuff Bobber - Waxed Tan

The Goldtop England short bobber motorcycle gloves are a tighter fitting pair of gloves designed for ultimate comfort when riding. With a reinforced palm and finger/thumb area, these gloves are built to last, and come with a quilted leather, velcro wrist fastening to safely secure your fit. This quilting, plus other perforated and ribbed styling ensures that these gloves provide that classic yet modern cafe racer look. Lined with traditional red fleece, these gloves are perfect for warm weather riding from spring through summer and autumn too!

Please note that both the Water Repellent Ducks Wax and Vintage Oil will change the colour of these gloves and give them a darker, richer look and feel. The Water Repellent Ducks Wax will help preserve and maintain this glove, whilst keeping most of the water out, but with these being perforated gloves....it sure won't keep it all out!

Try the Goldtop water repellent balm to care for and protect.

PRODUCT INFO

1.0 mm hand-waxed aniline cowhide leather
Single hide palm and perforated rear styling and no split fingers!
Traditional red fleece lining
Reinforced lower palm and finger/thumb
Quilted velcro fastening
5 strand cotton thread stitching throughout

womens-black-motorcycle-riding-leggings-front-view

women-wearing-black-leggings-sitting-on-motorcycle

GoGo Gear Protective Armored Leggings (High Waist - LONG)

GoGo Gear Protective Armored Leggings (High Waist - LONG)

$249.99

LADIES!

Can I just say that I F@$#ing LOVE THESE RIDING PANTS!!! and I think everyone needs to try these bad boys on and see for themselves. Love Love Love 'em!!!

Are you looking for protective, comfortable, and stylish riding pants??? It seems like an unrealistic combination, right?

NOTE: The Tall leggings are a completely different product from our regular leggings. Please do NOT use the size chart for our regular leggings to order this item. See the measurement chart attached for this product.

PLEASE CONTACT LINDZ AT INFO@PERTHCOUNTYMOTO.COM IF YOU NEED ASSISTANCE WITH SIZING. WE WANT TO ENSURE YOU GET THE BEST FIT AND ARE HERE TO HELP! HELPFUL HINT: I'VE FOUND THE BEST WAY TO DETERMINE THE PROPER SIZE IS TO TAKE YOUR LARGEST MEASUREMENT (HIPS, BUM) AND USE THAT AS YOUR LOWER HIP MEASUREMENT.

HOW TO DETERMINE THE BEST SIZE TO ORDER:

1. Measure all the way around the widest part of your hips and rear end

2. Take that number and compare against the size chart below to find the size that matches or is closest to your measurement

3. If you consider yourself to have a "flat" rear end, go with the size listed. If you have a "curvy" or "extra" in the rear, go one size up.

FEATURES

Fabric Outer Layer: 100% Abrasion Resistant Polyester Cotton Fabric with 5% Spandex

Fabric Inner Layer: 100% Made Of DuPont™ Kevlar® Fibers, 275gsm Weight, 95% Kevlar with 5% Spandex FULLY LINED WITH KEVLAR FROM TOP TO BOTTOM - NOT JUST IN THE KNEE AND SEAT AREA

Fabric Inside Protector Pockets: Polyester Cotton Jersey

CE-Approved Removable, Adjustable Knee Protector Pads (Level 1)

Inside Pockets for Hip Protectors (protectors not included) See below for links to where you can purchase the hip protector pads separately

Two Outside Front Pockets

Ribbed Decorative Detail on Knees

Machine Washable

Moto Iron - Extended Fork Tube Kit 39mm for Sportster/Dyna Narrow Glide

Moto Iron - Extended Fork Tube Kit 39mm for Sportster/Dyna Narrow Glide

$515.00

Extended Fork Tube Kit 39mm for Sportster/ Dyna Narrow Glide

39mm Fork Tubes

Fitment Notes:

Fits all 87-2015 Sportster XL (Except 96-03 XL1200S Sportster Sport Models)

Fits all 87-94 FXR, 91-05 FXD Dyna, (Except 00-05 FXDX, FXDXT),

Hard Chrome Finish.

Centerless ground outside diameter to O.E.M. specifications and machined the rest of the tube to exact ID specs, material is buffed and hard chrome plated for a durable finish.

Hard Chrome finish is electrolyzed for increased hardness of 55-60 Rockwell
Hard Chrome increases hardness for better long-lasting corrosion resistance
Hard Chrome is a smoother finish creates less drag and seal wear

Sold in pairs.

Fork seal kit included.

TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack

TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack

$15.00

Leather Cushion Washers with 3/8 inch Hole 10 pack

These leather washers are perfect for protecting your paint and are more durable than rubber. The cushioning & dampening effect that these washers provide is perfect for installing between your frame and mounting tabs found on gas tanks, fenders, oil tanks, or anything else you want to protect from vibration. Also great for use under solo seat springs to prevent squeaking. Dimensions are 1 inch diameter x 3/8 inch hole x 1/8 inch thick. Sold in pack of 10 washers.

Perth County Moto Classic Logo Hoodie

$74.99

Perth County Moto Classic Logo Hoodie

People have been asking for a our classic logo on a hoodie for a long time so here it is! This pullover hoodie is a comfortable relaxed fit. Black with white print. Great for fall nights around the fire and to keep in your saddlebag for cooler evenings.

Shinko Super Classic 270 - Black

$189.95

Super Classic 270

Classic Saw-tooth design with modern engineering. These are a re-pop or the Goodyear tires form the 1960's

Classic full aspect ratio sawtooth design
Full 4 ply rated nylon carcass for extended wear with a classic appearance
Black
S speed rated, tube type

John Doe Motoshirt - Camel

$379.00

This product has been discontinued by John Doe and quantities are limited to available stock only.

John Doe Motoshirt with XTM-Fiber®

Perfect for that streetwear look, Motoshirt XTM® is probably the most comfortable thing you can wear that’s still AAA certified.

The lining in our XTM-Fiber® together with shoulder, elbow, and back protectors make this possible. Motoshirt XTM® has two breast pockets with press studs as well as two inside pockets, one with a zipper and one with Velcro.

The cuffs are adjustable to two widths using two press studs.

The stretch fabric used gives you an extremely comfortable wearing experience with ventilation to the sleeves and back to keep things cool on a hot day.

Material and details:

CE certification: AAA (EN17092-2:2020)
Two-layer design
XTM-Fiber® lining
Cotton-twill outer fabric
XTM protector-ready
Integrated shoulder, elbow, and back protector pockets
Level 1 shoulder and elbow protectors included
Button-down collar
Long sleeves, straight shoulder – adjustable cuffs
Patch pockets with press studs
Multi stretch comfort
Inside pockets on the left and right
YKK zipper
Ventilation
John Doe brand logo

Perth County Moto RWYB Trucker Hat - Brown/Tan

Perth County Moto RWYB Trucker Hat - Brown/Tan

$34.00

RWYB Trucker Hat

Harkening back to the days of kicking over your two-stroke and hitting the dirt. The Run What You Brung foam trucker is that perfect hat you can beat up but it always pops back into shape.

Foam trucker
Black and orange RWYB logo
Adjustable
One size fits most
Brown and tan

I Love Motorcycles Bumper Sticker

$4.95

I Love Motorcycles Bumper Sticker

Driving a car is boring! Let the world know that you would rather be on a motorcycle with a bumper sticker

11" x 2.25"