All

Ducati Valve Stem Caps - Black

• Designed for use with metal or rubber valve stems
• Low-cost finishing touch for your custom build
• Add a cool custom touch to your stock bike

Rocket Valve Stem Caps - Black

• Designed for use with metal or rubber valve stems
• Low-cost finishing touch for your custom build
• Add a cool custom touch to your stock bike

Assorted Heat Shrink

Working on a wiring project? This package of assorted heat shrink gives you a variety of lengths and diameters. Super handy

Roark Separator Camp Tool

Get out of here, spork. The Roark Separator Camp Tool is the new top dog in town. Fork? Spoon? Sure, no problem. But a razor-sharp folding knife blade too? Spork can't compete. It's one tool for all of your outdoor utensil needs.

Description 

Lookin Like A Snack Crew Socks

You'll be Looking Like a Snack in these tasty crew socks designed with the classic Reese's hues. Made with a combed cotton blend and medium cushioning, you'll be deliciously comfy right out of the box.

Infiknit™ Lifetime Guarantee

Our Infiknit™ technology never rips, never tears. Made for good. But if you’re turbo-gnarly and rip one, we got you.

100% Satisfaction Guarantee

We stand behind our product and want to make sure that you’re happy. Not stoked? We’ll make it right.

Crew

A classic sock height that hits the mid-point of your lower leg.

Medium Cushioning

Moderate cushioning throughout the sock for a secure fit with enhanced impact protection.

Deep Heel Pocket

Deep Heel Pockets complement your arch with that feel-good fit.

Engineered Arch Support

Engineered Arch Support stabilizes your swing in style.

Targeted Cushioning

Targeted Cushioning for added comfort where you need it most.

Seamless Toe Closure

Seamless Toe Closure for an anti-friction finish your feet will love.

Combed Cotton Blend

70% Combed Cotton, 19% Polyester, 9% Nylon, 2% Elastane

Boyd Crew Socks

Infiknit™ Lifetime Guarantee

Our Infiknit™ technology never rips, never tears. Made for good. But if you’re turbo-gnarly and rip one, we got you.

100% Satisfaction Guarantee

We stand behind our product and want to make sure that you’re happy. Not stoked? We’ll make it right.

Crew

A classic sock height that hits the mid-point of your lower leg.

Medium Cushioning

Moderate cushioning throughout the sock for a secure fit with enhanced impact protection.

Deep Heel Pocket

Deep Heel Pockets complement your arch with that feel-good fit.

Engineered Arch Support

Engineered Arch Support stabilizes your swing in style.

Targeted Cushioning

Targeted Cushioning for added comfort where you need it most.

Seamless Toe Closure

Seamless Toe Closure for an anti-friction finish your feet will love.

Combed Cotton Blend

70% Combed Cotton, 19% Polyester, 9% Nylon, 2% Elastane

Jockey Shifter and Suicide Clutch Kit - VT600 - All Years

The BOLT-ON Jockey Shifter and Suicide Clutch Kit for the Honda Shadow VT600, VLX600 is the first of its kind to be produced for the Honda Shadow motorcycle! 

Fits:

• Honda Shadow VT600 1988 - 2007

The Jockey Shift and Suicide Clutch Kit for bobbers and choppers is a breeze to install, requiring zero fabrication, you will only need a few wrenches, and some allen/hex keys to get your bike rolling!  The Aluminum Shift knob is threaded at 3/8-16".  This is an amazing upgrade for your Honda Shadow!

You can use your stock clutch cable or pick up a 2" shorter clutch cable! The kit will come partially assembled, you will need to use Loctite and adjust everything before you ride. Tighten the Jockey Shift set screws down tightly!

Each Suicide Clutch Kit will include a replacement forward engine mount bolt and 3 stainless cap head screws to bolt the clutch backing plate to your stator case! Jockey Shifters will include the adapter, arm, hardware, and TJ Brutal Customs aluminum shift knob which threads onto the shifter arm.

**Note:  Please use loc-tite on all threads before riding. For case, bolts use anti- seize**

The Suicide Clutch Kit DOES NOT fit the VT750, however, the Jockey Shifter arm will.

Check out the video for a simple step-by-step install!

5/16-18 Threaded 1" Long Steel Bung

Steel Bungs 5/16-18 Threaded 1 inch Long by TC Bros Save time and create a super strong mount for just about anything on your bike using these fully threaded bungs. Proudly made in the USA from premium American 1018 cold rolled steel for easy welding. These are a perfect match to our 3/8" counterbore style bungs for socket head bolts. These bungs are 3/4" diameter x 1" long and are tapped through with 5/16-18 threads. See photos for all dimensions. Sold in packs of 4.

Darlington Air Cleaner

Get rid of your bulky air cleaner and show off that H-D Engine! The Prism Supply Co. Darlington Air Cleaners were designed to achieve a clean, classy, and traditional look while maintaining maximum performance. These are beautifully machined from a solid chunk of 6061 aluminum and are available with either a polished or brushed finish. The internal venturi was designed to allow for maximum airflow. The mounting hardware for the cover is installed from the backside and gives that minimal look we all strive for.

With our combination of heavy and fine filtering elements, we can guarantee you’ll be keeping all that unnecessary crud out of your engine. If you ever are in need of a replacement filter element, those can be purchased here.

This compact kit is designed to be used on all H-D engines that use a CV carburetor or factory EFI units (excluding throttle by wire models)

Dimensions are as follows:

• 5.5” diameter
• 1.5” total depth

*Some basic jetting/ tuning may be required upon installation to maintain the correct air/ fuel mixture.

*When installing, it is recommended to use a carburetor support bracket.

Hardtail Mono-Strut - Fits Honda Shadow VT600 VLX 1988 - 2007

These hardtail mono struts for all years of Honda Shadow VT600 and VLX 600 (1988 - 2007) are machined from solid 6061 aluminum billet and designed to hardtail and lower your bike just enough to get the look you want without sacrificing handling. The Mono Strut replaces the Mono Shock on your VT600 to achieve the hardtailed look and feel, without the fabrication know-how and mess!!
Made with the builder in mind, you can leave these struts exposed for a clean, well-thought-out look.

THESE FIT ALL YEARS (88-07) OF THE VLX600/VT600 HONDA SHADOWS.

Chamfered edges, straightforward design, solid construction, and quality finishes let you know you are putting the highest quality parts on your bike.

The 9.00" length ( hole center to hole center) is to drop the bike just about as low as it can go without frame modification and still maintain good handling physics and steering response. So you will get around a 1.75"-2" drop depending on tire choice. 
These struts will bring the swing arm closer to the rear fender horns/forward frame loop.

M8 Fat Bob Kickback Sissy Bar Black 2018-Newer FXFB FXFBS

TC Bros. Bolt-on Sissy Bar makes securing your gear fast and simple. Classic good looks and durable one-piece construction will provide years of hassle-free service.  Direct bolt-on fitment for Harley Davidson Milwaukee Eight® Softail Fat Bob 2018-newer FXFB FXFBS.

Unique Features

• The rigid design is constructed from 5/8" diameter solid steel.
• Precision CNC bent for perfect fitment and symmetry. 
• TIG-welded for strength and appearance.
• Durable black powder-coat finish. 
• Integrated "bungee hook" holes for use when securing your gear.
• Stainless steel hardware is included for easy installation.

Fitment Notes:

• Direct bolt-on kit to Harley Davidson M8 Fat Bob 2018-newer FXFB FXFBS.
• Works great with stock turn signals.
• Will fit with or without stock chrome frame covers on most models.
• Overall height: 20.5"

Sissy Bar/Fender Strut Mounting Bungs 5/8" ID

DIY Sissy Bar/ Fender Strut Mounting Bungs - 5/8" ID.

Perfect size for the TC Bros Tall length DIY sissy bars and with the TC Bros fender strut kit.

• Tall Kickback Sissy Bar
• Tall DIY Sissy Bar

Ghost and MOD Bandit Interior Shield - Amber

Interior shield for Ghost Bandit, Venom, and Mod Bandit helmets.

Simpson helmet shields are offered in clear as well as stylish and functional tints. When ordering a shield for your motorcycle helmet, keep these considerations in mind:

• Amber shields provide a minimal amount of tinting that's ideally suited to overcast weather.

MX-9 Adventure DLX MIPS

With the MX-9 Adventure DLX Mips, pavement is optional. This go-anywhere helmet gives you the best of both dirt and street. It's designed to adapt to your version of adventure.

Certifications

• DOT
• ECE

Construction

• Lightweight polycarbonate/ABS shell

Ventilation

• Velocity Flow Ventilation™
• Fully adjustable Flying Bridge Visor™with air intake vents
• Fully ventilated EPS-lined chin bar
• Integrated vented roost guard

Energy Management

• MIPS® Energy Management System

Other Tech And Features

• Integrated/Removable anti-fog, anti-scratch, and UV-protected NutraFog II™ shield
• DLX model comes with Protint shield
• 3 shell and EPS sizes for a personalized fit
• Removable/washable anti-odor interior
• Padded chin strap with D-ring closure