Cleaner

Carbu Cleaner

CARBU CLEANER is a powerful carburetor cleaner and degreaser. It removes all deposits and allows for better starts.

CARBU CLEANER effectively cleans and degreases your carburetor and eliminates all fuel deposits thanks to its powerful formula.

The result is visible quickly: better starts, real power gain and stabilized idling. It improves your engine's pick-up, lowers exhaust smoke emissions and reduces your gas mileage.

Its multi-position diffuser is ultra-practical thanks to its retractable rod, fixed on the spray, which folds and unfolds in a gesture. No more rod that you lose in the workshop after 2 uses!

It is compatible with all types of joints. Its multi-position sprayer guarantees powerful and precise spraying.

Directions for use: Spray the product on the parts to be cleaned. Dry with compressed air. 

• Used to clean and remove deposits in and around the carburetor
• Gentle on all plastic and rubber components
• For carburetors and injectors
• Multi-position defuser combines a powerful spray with a precise spray
• 750ml Aerosol can

Helmet In

is an interior helmet cleaner that removes dirt accumulated in your helmet such as perspiration or dust.

Spray the foam and let it work for 1 hour. Wipe with a cloth if necessary. Your helmet is clean and fresh.

Visor Rainoff

VISOR RAINOFF is a visor cleaner with a water-repellent effect. It places a protective film on the visor allowing water to slide easily.

Spray the product on the visor, let it dry for 2 minutes and wipe with a soft cloth.

Total Cycle Cleaner 1/2Ltr

• S100 Total Cycle Cleaner works by creeping to find the hidden soils you can't see, then penetrating and loosening them so a sharp stream of water can remove them
• Spray on in seconds, rinse off in seconds, and the job is done
• Can be used safely on all plastic, plated, and painted surfaces, and won't strip wax
• Sprayer with 6-foot hose accessory is available, sold separately

S100 Wheel Cleaner

Sometimes those road wheels need some extra cleaning power to get them back to that "like new" look. And, worse yet, that brake dust (it contains metallic particles!) can become corrosive if allowed to stand for awhile. If you find that brake dust build up is hard to keep up with, we recommend you try our S100 Special Performance Gel Wheel Cleaner. It provides up to 50% more cleaning power than our Total Cycle Cleaner thanks to the clinging power of its unique gel formulation. Spray on and allow to stand, then rinse thoroughly. Neither acid, nor lye-based like cheaper products, S100 Wheel Cleaner provides complete surface safety for any type of wheel or wheel finish, including those tricky anodized finishes.

Features:

• Removes brake dust, road soils and chain lube
• Non-acid, non-lye based formula
• Safe for all wheels and coatings, even anodized
• Unique gel formulation clings for better cleaning

Polishing Soap

The perfect weapon in that fight against dulling and tarnishing for larger areas.  This just might be the world’s fastest way to polish!  Forget the slow, tedious two-finger polishing you know and step up to a handful of polishing power.  Based on a technology used by European silversmiths, this clay and soap-based polish is applied with a wet sponge (included).  Wet the sponge, drag across the Polishing Soap and scrub the surface.  Rinse with a hose or let dry and buff out.  No smelly, oily residue and a speed that will amaze you.  Pipes, fork tubes, wheels, case covers etc. get shined up in a fraction of the time it used to take.  Economical, too.  Outlasts a couple of tubes of ordinary polish.  (Not recommended for painted or anodized surfaces.). Dozens of uses around the home are described in the booklet included.

Carnauba Paste Wax

Now you’re ready for the ultimate wax job with our S100 Carnauba Paste Wax.  Free of abrasives and cleaners and made with a unique blend of carnauba (the world’s hardest wax) and beeswax, you will be amazed at the depth of shine and darkening of dark coloured surfaces.  And we’ve eliminated two common annoyances, powdering during rubout and white stain residues on plastics and rubber!  And it’s so easy to apply and remove, some bikers tell us it’s as easy to use as a liquid!

Viso-Clean Individual Packets

VISO-CLEAN quickly and effectively loosens and removes dust, insects, oil residue etc. Increased safety thanks to a smudge-free, clear view. The handy little cleaning kit, which contains one wet wipe and one dry, fits in any small bag, making it perfect for use on the move.

MC Care C1 Chain Clean

A powerful degreasing agent for all types of motorcycle chains (road and off-road) and those of other vehicles (bicycle, moped, go-kart, ATV). Effectively removes all encrusted deposits. Its chlorine-free extreme grease removal formula is perfectly suited to O-ring, X-ring and Z-ring chains. Evaporates very quickly.

• Cleans all types of motorcycle (road and off-road), quad and kart chains
• Degreases chains and removes encrusted deposits of grease, sand and dirt without using chlorine
• Available in 9.8-ounce net wt. aerosol cans sold each

Chrome and Aluminum Polish

• Cleans restores and polishes new and/or tarnished chrome and aluminum parts

• Does not damage chrome treated or aluminum surfaces

• Keeps chromed parts looking like new

• 100ML

ORIGINAL KREEM TANK PREP - Tank Wash & Conditioner

KREEM FUEL TANK LINER is designed for use as a preventive maintenance product in metal tanks new and old; containing gasoline, gasohol, or diesel. KREEM TANK LINER has a unique formulation with an extremely rapid set-up that prevents leakage from hairline cracks and seam pinholes by coating the tank's inner surface with a fuel resistant elastomer. Not for plastic tanks. KREEM is NOT compatible with all fibreglass tanks. You must spot test before use. Read the Kreem brochure for detailed application instructions.

Storage & Handling:

Store product at 60-80 degrees for maximum storage life. High temperatures reduce normal storage life. Lower temperatures cause increased viscosity of a temporary nature. Rotate stock on a first in - first out basis.

APPLICATION
Surface Preparation:

It is critical that the inside of the tank has an oil-free surface without rust to ensure proper adhesion. We recommend Kreem Tank-Prep Kit A & B, our two-part system for rust removal and metal etching.

1. Wash out the tank with hot soapy water. If the tank is badly rusted and has loose flaky rust add stones or nuts and bolts and agitate to remove the loose rust. For new tanks, it is important to remove the oily protective coating. An industrial-strength detergent or a commercial degreaser/cleaner like KREEM new Tank Cleaner/Degreaser, acetone, M.E.K. should be used.
   
   
2.  After completing Step 1, and to obtain maximum adhesion, the surface rust should be removed and the metal surface etched, this can be accomplished by using Kreem Tank Prep A & B Kit, or some other acid-based rust remover that also etches metal. Repeat if necessary until all rust is removed.
   
   
3. Rinse the tank with water until all traces of Tank-Prep A (acid etch) are removed. Drain out excess water. Using Tank-Prep B (acetone or M.E.K.) rinse thoroughly removing trace amounts of water. CAUTION: these chemicals are flammable. The tank is now ready for immediate coating.
   

How to Apply

1. Shake or stir well before use. Keep container tightly closed when not in use. Stop all outlets except fill spout.
   
   
2. Pour Liner into the tank and coat the entire inner surface by slowly rotating the tank in all directions. When all surfaces have been completely coated, a generous excess should remain. Let tank stand for 8-10 minutes with spout open, then close spout and slowly rotate tank allowing excess to re-coat all surfaces. Let the tank stand for an additional 8-10 minutes with spout open, however, this time on a different side. Repeat this until the tank has the desired coating. Do not allow the coating to drain to one area and dry. Drain off excess coating for later use.
   
   
3. Drain any excess, remove all stops and allow to air-dry in a well-ventilated area for at least 24 hours. A nozzle from a low-pressure air compressor blowing lightly into the fuel spout and out another opening will greatly reduce setup time.
   
   
4. For extra protection, air-dry first coat for 6 hours or longer and repeat step 2 of the application process.
   

Quantity Required

For small tanks (1-5 gallons) use one pint liner. For larger tanks, use one quart per 20 gallon of tank capacity. If the tank contains baffles, be sure to consider the increase in surface area. For spraying or brushing thin with methyl ethyl ketone to desired consistency. Remove the tank from the vehicle, remove any valves and petcocks, and stop all outlets.