🚚 Free Canada-wide shipping on orders over $199 (excluding oversized items)
The motogadget mo.blaze pin sets a new benchmark for bolt-on LED turn signals. Its ultra-compact dimensions and minimal design let it nearly disappear into the bike — until it's on. Powered by IntensiLED® technology, the light output is extremely bright, and the patented TranzLight® Technology (TLT) delivers a wide beam angle for maximum visibility and safety in all directions.
ECE approved for use as both a front and rear direction indicator. The CNC-machined aluminum housing is available in anodized black or mirror polished finish.
Compatible with load resistors or any motogadget load-independent flasher relay (m.flash, m.wave, m.stop, m.relay+).
Note: Sold individually. Order 2 for a pair (front or rear), or 4 for full front and rear use.
| Total length (with thread) | 38.5 mm |
| Length (without thread) | 19.5 mm |
| Largest diameter | 16 mm |
| Cable length | ~100 cm |
| Weight | ~12 g |
| Mounting | M8 threaded bolt |
| Power consumption | ~3 W |
| Approval | ECE (front & rear) |
| Housing | CNC-machined aluminum |
| Finish options | Anodized black / Mirror polished |
Motogadget mo.unit Blue - Digital Control Unit & Wiring System for Custom Motorcycles
Regular price $570.00🚚 Free Canada-wide shipping on orders over $199 (excluding oversized items)
The Motogadget mo.unit blue is the ultimate digital control and wiring solution for custom motorcycles, bobbers, cafe racers, and choppers. This compact, intelligent control unit replaces traditional fuse boxes, relays, and complex wiring harnesses with a single, programmable digital system that's configured wirelessly via Bluetooth.
📄 Download mo.unit blue Installation Manual (PDF) — Complete wiring diagrams, setup instructions, and configuration guide.
For the latest firmware updates and additional support, visit Motogadget's Support Page.
Complete your mo.unit installation with these essential accessories:
Universal fitment for custom motorcycle builds. Works with 12V electrical systems. Compatible with Motogadget instruments (mo.view, mo.scope), lighting (m-blaze, m-tri), and controls (m-switch, m-button). Ideal for:
Note: For a complete plug-and-play installation, we recommend adding the m.unit Cable Kit and mo.unit Ground Distributor to your order.
Made in Germany by Motogadget—precision engineering for custom motorcycle builders who demand the best.
Motogadget m.unit Cable Kit
Regular price $115.00🚚 Free Canada-wide shipping on orders over $199 (excluding oversized items)
The Motogadget m.unit Cable Kit is the purpose-built wiring kit for building a clean, professional harness with the Motogadget mo.unit blue or mo.unit basic. It contains 17 colour-coded, top-grade copper-strand cables in three gauges — matched to the mo.unit’s output functions — along with cable ties and end sleeves. Approximately 1 kg of materials in total.
Each cable colour corresponds to a specific function or output on the mo.unit system. Having the correct gauge and colour from the start eliminates guesswork, reduces wiring errors, and produces a harness that’s easy to trace and service later. The lengths are sufficient for most custom motorcycle builds.
| Cable Colour | Gauge | Length |
|---|---|---|
| Brown | 2.5 mm² | 5 m |
| Black | 2.5 mm² | 4 m |
| Blue | 2.5 mm² | 2 m |
| White | 1.5 mm² | 4 m |
| Red | 1.5 mm² | 2 m |
| Yellow | 1.5 mm² | 4 m |
| Orange | 1.5 mm² | 4 m |
| Green | 1.5 mm² | 2 m |
| Purple | 1.5 mm² | 2 m |
| White | 0.5 mm² | 2 m |
| Blue | 0.5 mm² | 2 m |
| Red | 0.5 mm² | 2 m |
| Yellow | 0.5 mm² | 2 m |
| Green | 0.5 mm² | 2 m |
| Orange | 0.5 mm² | 2 m |
| Purple | 0.5 mm² | 2 m |
| Brown | 0.5 mm² | 2 m |
Pair this cable kit with the Motogadget mo.unit blue and the mo.unit Ground Distributor for a complete, clean wiring solution.
Antigravity - AG-801 Battery (8-Cell)
Regular price $310.95 Sale price $302.95🚚 Free Canada-wide shipping on orders over $199 (excluding oversized items)
At a very small 4.25″ Length x 2.25″ Depth and 3.75″ Height (to the top of the terminals) this battery offers extreme power in the most compact size in Lithium Motorsport batteries. This battery is best used for applications where extreme weight loss and ultra compact size are desired and can be used for bikes from 600cc street use and 1200cc race use.
Motogadget m.button
Regular price $155.00🚚 Free Canada-wide shipping on orders over $199 (excluding oversized items)
Another innovation from motogadget: the m.button.
It's a big help - in combination with the new m.unit blue, basic, and m.unit v.2 - in reducing 'cable clutter' and simplifying wiring harnesses.
Integrated into the handlebar tube - or any other adequate location - this tiny cylinder will electrically connect all handlebar instruments, switches, and buttons.
Using state-of-the-art bus technology, the m.button digitally processes signals and transmits them to the m.unit over a thin cable.
The electrical consumers will then be switched inside the m.unit.
All control wires are moved into the handlebar. This saves space, weight, labour, and time. A 'must have' for custom bikes with clean-look handlebars.
In simple facts:
a) normally, the operating current (e.g. headlight or turn signals) is transmitted directly via the wiring of the handlebar switches. Due to the high currents, cables with large cross-sections have to be routed from the fuse box to the switch and back to the electrical consumer.
The result: big cable bundles. Definitely, a 'no go' for custom bikes with restricted space or a concealed electrical system.
b) using the m.unit without the m.button, just a thin cable for each switch- or button-controlled feature has to be routed to the m.unit. These cables only carry minute control currents. All high loads and currents are switched directly at the m.unit and transmitted directly to the electrical consumers. This already leads to a significant reduction and simplification of the wiring harness. Here you can see the example of a circuit diagram.
c) using the m.unit blue, basic, or m.unit v.2 in combination with the tiny m.button, you will once again reduce the number of cables that have to be routed! All switches/buttons on the handlebar are connected at the shortest distance possible and concealed inside the handlebar. Consequently, you will have to route only ONE thin cable from the m.button to the m.unit. All loads and currents will be switched directly at the m.unit (see explanations above). A layout reduced to the max! Here you can see the example of a circuit diagram with the use of m.button
The m.button is completely moulded in, making it water-tight and resistant to vibrations.
The m.button is equipped with connections for
- turn signal, left side
- turn signal, right side
- headlight (low beam and high beam)
- E-starter
- horn
- brake light switch, front brake
m.button – dimensions
Diameter: 12 mm
Length: 25 mm
Cable length: approx. 60 cm
Connecting cable to m.unit: approx. 200 cm
Weight: approx. 30 g
Attention: The only intended use of the m.button is in combination with m.unit blue or m.unit v.2
