You may also like
🚚 Free Canada-wide shipping on orders over $199
The Acerus single cable throttle assembly for the Honda Shadows is machined from billet aluminum and made to work seamlessly with the stock Honda Shadow throttle pull cable. That's right! You do not need to run a push cable! The stock throttle assembly is quite bulky and lacks any kind of visual aesthetic. Who are we kidding, it's totally haggard! Many folks wish to clean up their bikes' cockpit by removing the stock assembly, relocating their switches, (videos HERE) getting rid of the push cable,https://youtu.be/zXaumYHMutE and going to a single pull cable (videos HERE).
Specs:
The Acerus allows you to maintain a clean, focused, and custom look on your bars with no unnecessary fluff, but enough style to show you have superb taste. because you definitely do, you got-dang champion!
Fits the following models throttle cables -
Honda Rebel
Honda Shadow VLX600 / VT600
Honda Shadow VT750, ACE, Aero, Spirit, Phantom, RS
Honda Sabre
Honda Magna
Honda VT1100
Honda VTX
*May fit other metric bikes.
* Some models' stock throttle sleeves may not fit.
For a perfect fit, it is recommended to pair this with the Malleus Machined Gripset!
Do not over tighten clamp bolts. Use red Loctite on the bolts. Fits 1" bars, will accommodate most grips for 1-inch bars. When clamping the assembly on your bars, a small gap between the upper and lower halves is normal, this ensures that the clamp isn't bottomed out before it can adequately clamp the bars. This allows the clamp to work well on raw material bars or bars that have plating or powder coating. When installing on powder-coated bars, it may be necessary to use a mallet to tap the halves of the assembly together so the bolts can grab the threads. Powder coating isn't an exact science and the thickness can vary from brand to brand, there is no way to anticipate this and if we made the clamps ID bigger, it wouldn't fit chromed bars.
We advise using a bit of lubricant inside the throttle assembly and under the throttle sleeve for smooth twist action and prolonged life of the parts.
Drag Specialties Dual Cable Throttle Sleeve
Regular price $5.95🚚 Free Canada-wide shipping on orders over $199
for 99-17 Twin Cam and 86 - 20 XL models (except 08-17 FLHT/FLHR/FLHX/FLTR and H-D FL Trike, 16-17 Softail, 16-17 FXDLS, 14-15 FLSTNSE, 13-15FXSBSE, 11-12 FLSTSE)
Goodridge - Banjo Bolt Brake Switch 3/8"-24 Threads
Regular price $40.95🚚 Free Canada-wide shipping on orders over $199
Brake line banjo bolt with built-in hydraulic brake light switch. 3/8"-24 thread. Mounts directly to the master cylinder through the brake line banjo fitting. Eliminates the conventional brake tee fitting that is required to mount the standard brake light switch. Simplifies the installation of custom length brake lines. Switch has normally open electrical contacts (no electrical current flow until actuated by hydraulic pressure).
V-Factor Throttle With Tube 1"
Regular price $18.95🚚 Free Canada-wide shipping on orders over $199
Kit includes chrome-plated throttle cable housing clamp with throttle return tension adjusting screw and nylon throttle sleeve. Available in single and dual cable models.
Moto Iron - Vintage Handlebar Control Kit
Regular price $702.95🚚 Free Canada-wide shipping on orders over $199
Slim line master cylinder and clutch for 1" motorcycle handlebars. Fits Harley 'ring' type clutch cable found on EVO Sportsters and other models. Also includes an end for a barrel style clutch cable fitting. Some models may require clutch cable modification. 9/16" (14mm) bore for most single caliper/disc applications. Master cylinder uses DOT 5 Brake Fluid.
Includes 3/8"-24 banjo bolt and sealing washers.
Biltwell Whiskey Throttle 1" Single Cable
Regular price $149.95🚚 Free Canada-wide shipping on orders over $199
Another classic Biltwell DIY part for home and pro bike builders. Our Whiskey throttle is available in two sizes and two surface finishes and includes everything you need to give your motorcycle cockpit vintage chopper style with modern MX throttle snap and feel.
Technical Details
Form and Function
Our Whiskey throttle is designed for DIY installation on custom motorcycles and is constructed with investment-cast clamshells and a CNC lathe-turned 6061 T-6 aluminum throttle tube. These components give a well-tuned Whiskey throttle its distinctive snap and allow builders to use a wide range of moulded rubber grips. Four Harley-specific cable ferrules included with each assembly interface with a wide model-year range of Motor Company cables.