Hand Controls

The Acerus - Single Cable Throttle Assembly For Honda Shadow - Brass

The Acerus single cable throttle assembly for the Honda Shadows is machined from billet aluminum and made to work seamlessly with the stock Honda Shadow throttle pull cable.  That's right! You do not need to run a push cable!  The stock throttle assembly is quite bulky and lacks any kind of visual aesthetic. Who are we kidding, it's totally haggard! Many folks wish to clean up their bikes' cockpit by removing the stock assembly, relocating their switches, (videos HERE) getting rid of the push cable,https://youtu.be/zXaumYHMutE and going to a single pull cable (videos HERE).

Specs:

• Machined from 6061A Aluminum
• Fits 1" handlebars 
• Stainless #8-32 bolts (req. 9/64 allen)
• Threaded for Honda throttle pull cables ONLY

The Acerus allows you to maintain a clean, focused, and custom look on your bars with no unnecessary fluff, but enough style to show you have superb taste. because you definitely do, you got-dang champion! 

Fits the following models throttle cables -
Honda Rebel
Honda Shadow VLX600 / VT600
Honda Shadow VT750, ACE, Aero, Spirit, Phantom, RS
Honda Sabre
Honda Magna
Honda VT1100
Honda VTX
*May fit other metric bikes.
* Some models' stock throttle sleeves may not fit.  

For a perfect fit, it is recommended to pair this with the Malleus Machined Gripset!
Do not over tighten clamp bolts. Use red Loctite on the bolts. Fits 1" bars, will accommodate most grips for 1-inch bars. When clamping the assembly on your bars, a small gap between the upper and lower halves is normal, this ensures that the clamp isn't bottomed out before it can adequately clamp the bars. This allows the clamp to work well on raw material bars or bars that have plating or powder coating. When installing on powder-coated bars, it may be necessary to use a mallet to tap the halves of the assembly together so the bolts can grab the threads. Powder coating isn't an exact science and the thickness can vary from brand to brand, there is no way to anticipate this and if we made the clamps ID bigger, it wouldn't fit chromed bars.  
We advise using a bit of lubricant inside the throttle assembly and under the throttle sleeve for smooth twist action and prolonged life of the parts.  

TBW Throttle Sleeve

Fits 08-19 FLHT/FLHRFLHX/FLTR models and H-D FL Trike, 16-20 Softails, 16-17 FXDLS

Dual Cable Throttle Sleeve

for 99-17 Twin Cam and 86 - 20 XL models (except 08-17 FLHT/FLHR/FLHX/FLTR and H-D FL Trike, 16-17 Softail, 16-17 FXDLS, 14-15 FLSTNSE, 13-15FXSBSE, 11-12 FLSTSE)

1" Vintage Handlebar Control Kit with Master Cylinder & Clutch  Harley and Custom Motorcycle

Slim line master cylinder and clutch for 1" motorcycle handlebars. Fits Harley 'ring' type clutch cable found on EVO Sportsters and other models. Also includes an end for a barrel style clutch cable fitting. Some models may require clutch cable modification. 9/16" (14mm) bore for most single caliper/disc applications. Master cylinder uses DOT 5 Brake Fluid.

Includes 3/8"-24 banjo bolt and sealing washers.

1" Classic Line Clutch Assembly

From forged aluminum construction, CLASSIC line cable control matches perfectly our CLASSIC brake master cylinder. Available for clutch and brake side, it fits all 1" handlebars. Both clutch and brake lever assemblies come with 2 cable pins for early and late style cables. The brake lever assemblies work perfectly with mechanical drum brakes, with our wire master cylinder, and in many custom applications. Available in 4 different finishes, polish, satin, raw, and Black. Note: the brass cable register is sold separately.

1" Deluxe Line Clutch Lever Assembly 

Made from forged aluminum body, our DELUXE line cable control comes in aluminum clamp with brass or aluminum lever, perfectly matching our deluxe master cylinder, available for clutch side or for brake side, it fits all 1" handlebars. The left side comes with a special cable pin, for early and late cable clutches. The right side works perfectly with mechanical drum brakes, with our wire master cylinder, and in many custom applications. Available in 4 different finishes, polish, satin, raw and black finish. NOTE: the brass cable register is sold separately.

Clutch Lever Assembly - Black

From forged aluminum construction, CLASSIC line cable control matches perfectly our CLASSIC brake master cylinder. Available for clutch and brake side, it fits all 1" handlebars. Both clutch and brake lever assemblies come with 2 cable pins for early and late style cables. The brake lever assemblies work perfectly with mechanical drum brakes, with our wire master cylinder and in many custom applications. Available in 4 different finishes, polish, satin, raw and Black. Note: the brass cable register is sold separately.

Jockey Shifter and Suicide Clutch Kit - VT600 - All Years

The BOLT-ON Jockey Shifter and Suicide Clutch Kit for the Honda Shadow VT600, VLX600 is the first of its kind to be produced for the Honda Shadow motorcycle! 

Fits:

• Honda Shadow VT600 1988 - 2007

The Jockey Shift and Suicide Clutch Kit for bobbers and choppers is a breeze to install, requiring zero fabrication, you will only need a few wrenches, and some allen/hex keys to get your bike rolling!  The Aluminum Shift knob is threaded at 3/8-16".  This is an amazing upgrade for your Honda Shadow!

You can use your stock clutch cable or pick up a 2" shorter clutch cable! The kit will come partially assembled, you will need to use Loctite and adjust everything before you ride. Tighten the Jockey Shift set screws down tightly!

Each Suicide Clutch Kit will include a replacement forward engine mount bolt and 3 stainless cap head screws to bolt the clutch backing plate to your stator case! Jockey Shifters will include the adapter, arm, hardware, and TJ Brutal Customs aluminum shift knob which threads onto the shifter arm.

**Note:  Please use loc-tite on all threads before riding. For case, bolts use anti- seize**

The Suicide Clutch Kit DOES NOT fit the VT750, however, the Jockey Shifter arm will.

Check out the video for a simple step-by-step install!

Acorn Shift Knob

• Threads are 3/8-24
• 1-1/8" diameter head
• Made of phenolic plastic

Ripple Shift Knob

• Threads are 3/8-24
• Available in polished aluminum or polished brass
• For jockey shift

Rebuild Kit for Clutch and Brake Master Cylinder 14mm (9/16") Bore

Rebuild kit for brake master cylinder 14mm (9/16”) bore

"Super Prism" Throttle Lock

• Includes thumb screw and spring
• Screws right into the "Super Prism" Throttle

Banjo Bolt Brake Switch 3/8"-24 Threads

Brake line banjo bolt with built-in hydraulic brake light switch. 3/8"-24 thread. Mounts directly to the master cylinder through the brake line banjo fitting. Eliminates the conventional brake tee fitting that is required to mount the standard brake light switch. Simplifies the installation of custom length brake lines. Switch has normally open electrical contacts (no electrical current flow until actuated by hydraulic pressure).

Easy Cruise Throttle Lock

Add cruise control to your motorcycle. Eliminate wrist strain on long rides. Reach your perfect speed, set it, and forget it! Fits all motorcycle handlebars.

• Made of NYLATRON thermoplastic resins, which are lightweight, and resistant to wear, heat, cold, and impact, while also having a high tensile strength 
• Easy to install
• Easy to remove if you need to install it on a different motorcycle
• The included rubber ring creates additional friction, which prevents accidental changes in speed

THE BLACK BOX - Complete Controls Kit

THE BLACK BOX is a Complete Controls Kit that includes our Grips, Pegs, Shifter, Brake Peg, Throttle Assembly & Carb Shield

Experience the ultimate in black parts with the TJBC BLACK BOX. Whether you're looking for a fully murdered-out build or just want to add some darkness to your bike, this curated box has you covered. Indulge with the finest ALL BLACK parts.

Each Black Box Includes:

• QTY 1: The Acerus - Single Cable Throttle Assembly For Honda Shadow - Black
• QTY 1 Set: The Malleus Machined Throttle Sleeve and Clutch Grips - 1" Bars - Black
• QTY 1: Holey Shifter Peg - Anodized Black
• QTY 1: Holey Brake Peg - Anodized Black
• QTY 1 Set: Holey Footpegs - Black 
• QTY 1: Fortis Crucem Carb Shield - Honda Shadow VT600 VLX600 VT750 - Black

Handlebar/Cable Line Install Kit Honda Rebel CMX1100

• Designed to mate perfectly to your late model Honda Rebel when using Burly Brand 12" Ape Hanger handlebars
• Burly has engineered this kit to end the guesswork, eliminate mismatched lines and floppy cables
• Kit includes extended throttle cables, extended clutch cable, brake line, E-brake cable and wiring harness for control switches and throttle control
• Detailed instructions included