These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 Chromoly tubes. Available smooth for a custom application, slotted to accept OEM Harley-Davidson hand controls, or TBW to accept Harley's Throttle-By-Wire control module.
Technical Details
Ape handlebars have a purpose beyond their classic chopper aesthetic, and that is to alter the bike's aerodynamic profile by raising the rider's hands level with or slightly above shoulder height. This increases the front profile going down the highway, which in turn reduces headwind pressure against the rider's chest at higher speeds. It's the same principle as a windshield, without the plastic appendage jutting off the forks. This version of our popular Ape handlebar is notched and slotted to accept the internal throttle module found on a variety of late-model H-D motorcycles. If your Harley does not feature Throttle-By-Wire technology, we have other bars that will work better for your custom needs. NOTE: your motorcycle's clutch cable, brake line and/or hand control wires may not be long enough to safely install this bar. Double-check these components before taking the stock bars off your motorcycle.
Prism Supply Co Rabbit Ear Handlebars - Stainless Steel
Regular price $184.95Rabbit Ear Handlebar Specs:
Dimensions are as follows:
TC Bros - 8" Narrow Mini Apes Handlebars 1"
Regular price $210.001" Narrow Mini Apes Handlebars
Our 8" Rise Narrow Mini Ape Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. They are CNC mandrel bent for ultra-smooth bends and flawless symmetry. Knurled riser clamp locations are 3.5" on centers to fit standard Harley spacing (not springer) and prevent bars from slipping once installed. With 8" of rise and sufficient pullback, these bars are very comfortable and fit stock cables, brake lines, and wiring on most Harley models. They look great on any Harley, but especially good on Narrow glide front ends because, unlike most ape hangers on the market, the bottom of these bars are not wider than the trees.
Available in two configurations: "Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls. Dimpled bars are drilled for internal wiring.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
TC Bros. 8" Springer Apes Handlebars - 1"
Regular price $210.00Our 8" Rise Springer Apes Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. They are CNC mandrel bent for ultra-smooth bends and flawless symmetry. Knurled riser clamp locations are 4.75" on centers to fit most aftermarket (Moto Iron, Paughco, DNA, Hardbody, etc) and stock Harley springer front ends. With 8" of rise and sufficient pullback, these bars are very comfortable and fit stock cables, brake lines, and wiring on most Harley models.
Available in two configurations: "Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls. Dimpled bars are drilled for internal wiring.
Available in two finishes: Triple chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
TC Bros. 1" Springer Apes Handlebars - 12"
Regular price $210.00Our 12" Rise Springer Apes Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. They are CNC mandrel bent for ultra-smooth bends and flawless symmetry. Knurled riser clamp locations are 4.75" on centers to fit most aftermarket springers (Moto Iron, Paughco, DNA, Hardbody, etc) and stock Harley springer front ends. With 12" of rise and sufficient pullback, these bars are tall while remaining very comfortable. These bars generally require extended cables, brake lines, and wiring on most Harley models.
Available in two configurations: "Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls. Dimpled bars are drilled for internal wiring.
Available in two finishes: Triple chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
TC Bros. 1" Narrow Apes Handlebars - 16"
Regular price $225.00Our 16" Rise Narrow Apes Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. They are CNC mandrel bent for ultra-smooth bends and flawless symmetry. Knurled riser clamp locations are 3.5" on centers to fit standard Harley spacing (not springer) and prevent bars from slipping once installed. With 16" of rise and sufficient pullback, these bars are tall enough to make a statement, while still being rideable. These bars generally require extended cables, brake lines, and wiring on most Harley models. They look great on any Harley, but especially good on Narrow glide front ends because, unlike most ape hangers on the market, the bottom of these bars are not wider than the trees.
Available in two configurations: "Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls. Dimpled bars are drilled for internal wiring.
Available in two finishes: Triple chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
Smooth configuration bars may also be used on many Triumph models or Metric Cruisers with 1" diameter stock handlebars.