Herezilla

Yamaha XS650 Weld On Hardtail Frame

Yamaha XS650 weld-on rigid hard tail frame section. This is the easiest way to make your XS650 into a chopper or bobber. They incorporate 3" of stretch and 5" of ground clearance for a very balanced look and stance that is very rideable. They are designed to use your XS650's stock wheel, tire, spacers, and chain adjusters. They are constructed of 1 1/8" diameter steel tubing with .120" wall thickness. The 1 1/8" diameter is also the same as the stock XS650 frame tubing for a very nice looking install that looks like it was factory made. The axle plates are cut from 3/8" thick steel and have an integrated mount hole for easy fender mounting. The hardtail was designed using the latest CAD software and built in a CNC machined fixture for a perfect fit every time. The lower rails have solid steel slugs welded into them that fit into the stock frame tubes for strength and easy assembly. Mounting instructions are included with every kit.

Only for use with 1970-1983 Yamaha XS650. Can't be used with any other Yamaha or other manufacturer motorcycles.

For all other makes/models, please refer to SKU: 104-0011, Universal Hardtail Kit in our Related Products section.

- High Quality, Proven Design since 2007

- Designed By TC Bros. Using The Latest 3D CAD Software.

- CNC Mandrel Bent American Made Steel Tubing For Accuracy.

- Welded in a CNC Machined Fixture For a Perfect Fit Every Time!

Vintage Cloth Covered 16g Electrical Wire - Brown

Replace your existing wire with this vintage braided 16 gauge wire. We offer this wire in many different colours for that ultimate custom look.  This wire consist of a multi-strand copper conductor with PVC insulation and one layer of cotton braid & lacquer. Made in the USA. Sold in 10' sections.

• Brown with Black Tracers
• 10' Long
• 16 Gauge
• PVC Insulation

AG-801 Battery (8-Cell)

5" Raw Flat Fender

5" flat profile fenders are among the highest quality you will find. Unlike others on the market, our fenders are actually designed for motorcycle use. This is NOT another re-labeled trailer fender that doesn't fit the profile of a motorcycle tire properly. These fenders feature a 27" diameter (13.5" radius) that follows motorcycle tires made for both 16" and 18" rear wheels. They are proudly made in the USA from heavy duty 14 gauge steel to survive the abuse that hardtail rigid frame choppers and bobbers can provide. They are undrilled for a universal fit allowing you to cut/drill to your custom application. 6" width works great for up to a 140 series tire.

Perth County Moto - Unisex tee

Kick It Patch

Our newest patch! Kick it and rip it doesn't just apply to older motorcycles. Regardless if you're kickstarting your motorcycle or hitting the start button. Fire it up and giver' hell!

• 2.25" patch
• black and white
• iron-on or stitch

The Silk Lined Viceroy Gloves - Waxed Brown

The Goldtop England short armoured motorcycle gloves are a truly unique pair of gloves, combining the luxury of silk with the durability of leather, resulting in a tighter fitting pair of gloves designed for ultimate comfort and protection when riding. 

A hybrid half-silk, the half-unlined internal design ensures that these gloves keep you cool on hotter days without becoming sticky and uncomfortable on longer rides, thanks to the addition of beautiful silk between the back of your hand and the glove itself. 

 Protection is provided through a comfort-driven "floating" armoured knuckle, gel-padded fingers and a reinforced palm and finger/thumb area, and with double stitching at all major stress points. These gloves are built to last, whilst your fit is secured in place whilst riding thanks to a ribbed, wrap-around velcro strap. Perforations, in addition to the silk lining, keep you cool, making these perfect for hot weather, Summer riding on or off-road!

Supplement your gloves with Goldtop Water Repellent Ducks Wax in order to give these gloves a darker, richer look and feel. The Water Repellent Ducks Wax will also help preserve and maintain these gloves, whilst keeping most of the water out, but with these being perforated gloves....it sure won't keep it all out!

Don't forget a jar of Goldtop Bison Wax to keep and protect these gloves

PRODUCT INFO

K-6 - Nardo Grey

Versatility defines the K6. Suitable for every type of riding and all riding surfaces, it incorporates the best characteristics from the sport and touring worlds and is ideal for taking on any two-wheeled challenge, from leaning into the turns on winding roads to long-range trips, by way of everyday city rides. Its carbon and aramid fibre shell ensures the very best protective performance in its category and makes it the lightest full-face road helmet in the world. The aerodynamic shapes developed in the wind tunnel are optimized for ideal air penetration in any riding position, making this solution perfect for riders who want the freedom to select their own riding styles, without compromise. The premium interiors are waterproof and ventilated. They are designed so riders can cover infinite miles in total comfort with only the road ahead to focus on. The innovative air vents on the forehead and chainguard are designed for easy adjustment even when wearing gloves, which means the rider always has the right amount of ventilation. All the technology developed for MotoGP™ riders, in a helmet for all uses on the road.

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric headliner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready face shield (insert sold separately)
• Innovative shield pivot reduces size and weight
• Double-D chinstrap

Ghost Bandit - Gloss Black

Designed 100% with motorcycle riders in mind, the Simpson Ghost Bandit is prepared to handle just about any type of riding in killer style and complete comfort. The lightweight shell has been aerodynamically tuned for motorcycle riding and is fully ventilated for maximum airflow when, and where, you need it most. Integrated speaker and microphone pockets make it easy to install your favorite communication device, and a drop-down sun visor makes riding through changing light conditions a breeze.

• Lightweight Composite Shell
• Tool-Free Shield Removal
• Removable/Antibacterial Liner
• Internal Sun Visor
• Multiple Shield Options
• Integrated Speaker and Boom Mic Pockets
• Dual Adjustable Chin Vents
• Top And Rear Ventilation
• Removable Chin Noise and Air Dam
• DOT, ECE approved

HELMETS ARE SHIPPED WITH CLEAR SHIELDS ONLY

Vintage Cloth Covered 16g Electrical Wire - Orange

Replace your existing wire with this vintage braided 16 gauge wire. We offer this wire in many different colours for that ultimate custom look.  This wire consist of a multi-strand copper conductor with PVC insulation and one layer of cotton braid & lacquer. Made in the USA. Sold in 10' sections.

• Orange with Black Tracers
• 10' Long
• 16 Gauge
• PVC Insulation

Vintage Cloth Covered 16g Electrical Wire - Blue

Replace your existing wire with this vintage braided 16 gauge wire. We offer this wire in many different colours for that ultimate custom look.  This wire consist of a multi-strand copper conductor with PVC insulation and one layer of cotton braid & lacquer. Made in the USA. Sold in 10' sections.

• Blue with White Tracers
• 10' Long
• 16 Gauge
• PVC Insulation

Vintage Cloth Covered 16g Electrical Wire - White with Black Tracers

Replace your existing wire with this vintage braided 16 gauge wire. We offer this wire in many different colours for that ultimate custom look.  This wire consist of a multi-strand copper conductor with PVC insulation and one layer of cotton braid & lacquer. Made in the USA. Sold in 10' sections.

• White with Black Tracers
• 10' Long
• 16 Gauge
• PVC Insulation

Vintage Cloth Covered 16g Electrical Wire - Grey with Black Tracers

Replace your existing wire with this vintage braided 16 gauge wire. We offer this wire in many different colours for that ultimate custom look.  This wire consist of a multi-strand copper conductor with PVC insulation and one layer of cotton braid & lacquer. Made in the USA. Sold in 10' sections.

• Grey with Black Tracers
• 10' Long
• 16 Gauge
• PVC Insulation

LADIES!

Can I just say that I F@$#ing LOVE THESE RIDING PANTS!!!  and I think everyone needs to try these bad boys on and see for yourself.  Love Love Love 'em!!! AND THESE ONES ARE HIGH WAIST WOOT WOOT!

Are you looking for protective, comfortable and stylish riding pants???  It seems like an unrealistic combination, right?

Look no further!  Perth County Moto has partnered with GoGoGearLA to offer their Kevlar Leggings here in Canada!

FEATURES 

Fabric Outer Layer: 100% Abrasion Resistant Polyester Cotton Fabric with 5% Spandex

Fabric Inner Layer: 100% Made Of DuPont™ Kevlar® Fibers, 275gsm Weight, 95% Kevlar with 5% Spandex  FULLY LINED WITH KEVLAR FROM TOP TO BOTTOM - NOT JUST IN THE KNEE AND SEAT AREA

Fabric Inside Protector Pockets: Polyester Cotton Jersey

CE-Approved Removable, Adjustable Knee Protector Pads (Level 1)

Inside Pockets for Hip Protectors (protectors not included) 

Two Outside Front Pockets

Ribbed Decorative Detail on Knees

Machine Washable

The HIGH-WAIST style offers you an additional 2" on the waistband but fit the same as the regular version. 

CAUTION: THE US SIZES 4 - 12 RUN SMALL! DO NOT SELECT A SIZE BASED ON YOUR CURRENT PANT SIZE! All SIZES FROM 14 UP RUN "TRUE TO SIZE" MEANING YOU CAN ORDER THEM BASED ON YOUR REGULAR US PANT SIZE!

PLEASE CONTACT LINDZ AT INFO@PERTHCOUNTYMOTO.COM IF YOU NEED ASSISTANCE WITH SIZING.  WE WANT TO ENSURE YOU GET THE BEST FIT AND ARE HERE TO HELP!  HELPFUL HINT:  I'VE FOUND THE BEST WAY TO DETERMINE THE PROPER SIZE IS TO TAKE YOUR FULLEST MEASUREMENT (HIPS, BUM) AND USE THAT AS YOUR LOWER HIP MEASUREMENT. 

NOTE:  If you are 5'9" & taller the GoGoGear Leggings Long Version is what you need!  These are listed separately on our website.  The size chart runs more true to size so please refer to the size chart and order accordingly.

LADIES!

Can I just say that I F@$#ing LOVE THESE RIDING PANTS!!!  and I think everyone needs to try these bad boys on and see for yourself.  Love Love Love 'em!!! AND THESE ONES ARE HIGH WAIST WOOT WOOT!

Are you looking for protective, comfortable and stylish riding pants???  It seems like an unrealistic combination, right?

Do you already have them in black? Well now you can grab a pair in NAVY!!!

Look no further!  Perth County Moto has partnered with GoGoGearLA to offer their Kevlar Leggings here in Canada!

FEATURES 

Fabric Outer Layer: 100% Abrasion Resistant Polyester Cotton Fabric with 5% Spandex

Fabric Inner Layer: 100% Made Of DuPont™ Kevlar® Fibers, 275gsm Weight, 95% Kevlar with 5% Spandex  FULLY LINED WITH KEVLAR FROM TOP TO BOTTOM - NOT JUST IN THE KNEE AND SEAT AREA

Fabric Inside Protector Pockets: Polyester Cotton Jersey

CE-Approved Removable, Adjustable Knee Protector Pads (Level 1)

Inside Pockets for Hip Protectors (protectors not included) 

Two Outside Front Pockets

Ribbed Decorative Detail on Knees

Machine Washable

The HIGH-WAIST style offers you an additional 2" on the waistband but fit the same as the regular version. 

CAUTION: THE US SIZES 4 - 12 RUN SMALL! DO NOT SELECT A SIZE BASED ON YOUR CURRENT PANT SIZE! All SIZES FROM 14 UP RUN "TRUE TO SIZE" MEANING YOU CAN ORDER THEM BASED ON YOUR REGULAR US PANT SIZE!

PLEASE CONTACT LINDZ AT INFO@PERTHCOUNTYMOTO.COM IF YOU NEED ASSISTANCE WITH SIZING.  WE WANT TO ENSURE YOU GET THE BEST FIT AND ARE HERE TO HELP!  HELPFUL HINT:  I'VE FOUND THE BEST WAY TO DETERMINE THE PROPER SIZE IS TO TAKE YOUR FULLEST MEASUREMENT (HIPS, BUM) AND USE THAT AS YOUR LOWER HIP MEASUREMENT. 

NOTE:  If you are 5'9" & taller the GoGoGear Leggings Long Version is what you need!  These are listed separately on our website.  The size chart runs more true to size so please refer to the size chart and order accordingly.

Vintage Cloth Covered 16g Electrical Wire - White with Blue Tracers

Replace your existing wire with this vintage braided 16 gauge wire. We offer this wire in many different colours for that ultimate custom look.  This wire consist of a multi-strand copper conductor with PVC insulation and one layer of cotton braid & lacquer. Made in the USA. Sold in 10' sections.

• White with Blue Tracers
• 10' Long
• 16 Gauge
• PVC Insulation

Vintage Cloth Covered 16g Electrical Wire - White with Red Tracers

Replace your existing wire with this vintage braided 16 gauge wire. We offer this wire in many different colours for that ultimate custom look.  This wire consist of a multi-strand copper conductor with PVC insulation and one layer of cotton braid & lacquer. Made in the USA. Sold in 10' sections.

• White with Red Tracers
• 10' Long
• 16 Gauge
• PVC Insulation

Classic Logo Tee - Navy

People have been asking for our classic logo to be printed on a long sleeve since the first day we opened our doors. Well, here it is! The Perth County Moto Classic Logo Long Sleeve is the perfect addition to your wardrobe. Made from 100% cotton, it features a unisex fit, long sleeves, and a classic logo to make you look your best. Your favorite shit is now available in a long-sleeve option