MotoGirl Lara women's motorcycle cargo pants combine everyday cargo styling with CE Class A certification and included Level 2 knee and hip armour. Choose Black, Olive Green or Camo, with waist adjusters, practical pockets and three inseam options.
Choose your fit before you order: start with your full hip measurement, then choose your inseam. View the PCM Lara size guide or ask us for sizing help. Our recommendations are based on in-store fittings; your usual clothing size may differ.
Why choose the Lara?
Armour included: CE Level 2 protectors for both knees and hips, supplied in a reusable bag.
Adjustable fit: front and rear waist buckles let you take in the waist after choosing a size that accommodates your hips.
Adjustable knee armour pockets: reposition the protectors and check their placement while seated on your motorcycle.
Useful storage: front and rear pockets, a coin pocket and two cargo pockets with zip and magnetic closures.
Comfort details: moisture-wicking mesh lining, belt loops, zip-and-snap fastening and ribbed ankle cuffs.
PCM Lara size guide: start with your hips
Measure around the fullest part of your hips and seat with your feet together. Keep the tape level and close to your body without pulling it tight. These are body measurements, not measurements of the pants.
PCM fitting recommendations for MotoGirl Lara cargo pants
Lara size
Full hip: inches
Full hip: approx. cm
XXS
32–34"
81–86 cm
XS
34–36"
86–91 cm
S
36–38"
91–97 cm
M
38–40"
97–102 cm
L
40–42"
102–107 cm
XL
42–44"
107–112 cm
2XL
44–46"
112–117 cm
3XL
46–48"
117–122 cm
4XL
48–50"
122–127 cm
5XL
50–52"
127–132 cm
At a shared boundary or between sizes? Contact us with your hip, natural waist and inseam measurements before ordering. Tell us if other riding pants feel tight through your thighs. We can help you assess the options rather than relying on a size label alone. This guide is a starting point, not a guarantee of fit.
The Lara can relax slightly with wear. Choose a size that accommodates your hips and thighs without restricting movement; use the waist buckles to adjust the waist. Do not choose an uncomfortably tight pair expecting it to stretch enough later.
A real PCM fitting example: Lindz wears 2XL with a 39" natural waist and 44" hip measurement. At 5′9″ she wears Regular. Her fit illustrates why height alone should not determine inseam.
Choose your inseam
Petite: 28" / approximately 71 cm
Regular: 31" / approximately 79 cm
Tall: 34" / approximately 86 cm
Use the inside-leg measurement of well-fitting pants as a starting point, measured from the crotch seam to the hem. Consider your riding position and whether you wear the cuffs inside or over your boots. Check length and knee-armour placement while seated, not only while standing.
Protection and construction
Garment certification: CE / UKCA Class A, EN 17092-4:2020.
Knee and hip protectors: CE Level 2, EN 1621-1:2012.
Construction: reinforced riding pants with a DuPont™ KEVLAR® / polyester mesh inner layer.
Class A describes the garment certification; Level 2 describes the included impact protectors. Follow the care instructions on your garment label and remove armour as directed before cleaning.
Availability, shipping and fit support
Choose Colour → Size → Inseam to check your combination. Availability varies by colour, size and length. Stocked pairs ship from Perth County Moto in Stratford, Ontario; shipping is calculated at checkout and dispatch days are Tuesday–Friday. Petite and Tall are not automatically special orders.
If your combination is sold out, check another colour or contact us about availability. Any special order must be confirmed with us, including its lead time and final-sale conditions.
Need help before purchasing? Email info@perthcountymoto.com with your measurements, preferred colour and boot style, or visit us for an in-store fitting.
Can I return or exchange them?
Eligible regular-price purchases may be returned or exchanged within 30 days of delivery, subject to approval and our return policy. Items must meet the policy's unused/unworn condition and packaging requirements. Sale and special-order items are final sale. Return shipping is normally the customer's responsibility and a restocking fee may apply.
DuPont™ and KEVLAR® are trademarks of affiliates of DuPont de Nemours, Inc.
Shopping for someone else but not sure what to give them? Give them the gift of choice with a Perth County Moto gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
*Take note that the gift cards are issued in Canadian currency.
Guardian Bell – Motorcycle Gremlin Bell – Ride Safe, Ward Off the Road Spirits
Regular price
$28.95
Gift it. Hang it low. Let the road gremlins fall off.
There’s a reason every rider knows and respects the legend of the Guardian Bell. When you mount this little bell onto your ride, you're doing more than just accessorizing—you’re joining a long-standing tradition of safety, brotherhood, and good karma on two wheels.
The Story & the Ritual Decades ago, riders swore by the gremlin myth: mischievous spirits lurking on the open road, ready to sneak up on your bike and cause trouble. The bell? It’s the trap. Hang it low on your frame or swingarm, and the rumbling of the engine and the constant ringing keep those road gremlins busy until they slip off—never to bother you again. And here’s the key: the power of this bell isn’t just in brass and steel—it’s in the gift. Someone who cares about you gives you this bell. That handshake, that nod between riders, the “ride safe” promise—all of it fuels the legend. Because you didn’t buy protection, you were given a shield.
Why This Bell from Us At Perth County Moto, we’re more than a store—we’re riders. We’ve lived the open stretch, felt the wind, and know that every mile counts. This Guardian Bell isn’t only built solidly; it’s backed by our own commitment to your ride. Whether you’ve just locked in your new bike, you’re gearing up for the big tour, or your buddy’s about to hit the road—this bell isn’t just a loop on your fork. It’s an “I’ve got your back” from someone who knows.
Product Details & How to Use
High-quality metal bell, ready to take the road vibes and ring loud and proud.
Compact size, easy to mount on the front fork, swingarm, or low frame-point—ideal location to trap those gremlins before they reach you.
Comes with mounting ring/clip for easy install.
Best hung low and visible, where it can rattle freely and reflect your ride’s character.
Gift-Ready for Riders Perfect for new bike owners, long-haul buddies, custom builds, or just because you care. Because someone else giving the bell to you is what sets this apart. Makes a meaningful stocking-stuffer, pit-box item, or “welcome to the club” present. Comes in a small gift bag with a message about the Guardian Bell lore.
Ride On With Confidence Mount it. Trust it. Ride safe. With this Guardian Bell hung on your bike, you’re keeping the legend alive—and more importantly, keeping your eyes on the horizon.
Coffee or Death Sticker - Matte Skull Decal for Helmets & Toolboxes
Regular price
$4.95
Coffee or Death Skull Sticker
For riders who live by two simple rules: keep the coffee flowing and the throttle open. This bold skull sticker delivers attitude and quality in equal measure.
Why You'll Love It
Premium matte finish – No glare, just clean graphics that look professional on any surface
Built to last – Weather-resistant adhesive stands up to sun, rain, and road grime
Easy application – Peel-and-stick backing applies smoothly without bubbles
Made in Canada – Designed and produced by Perth County Moto in Ontario
Ideal For
Motorcycle helmets, mechanic toolboxes, coffee thermoses, laptop cases, garage fridges, or anywhere you want to declare your caffeinated commitment.
Specifications
Dimensions: 3" H × 2.3" W
Finish: Matte (non-reflective)
Material: Durable vinyl with weather-resistant adhesive
Origin: Made in Ontario, Canada
PCM Oak Leaf Sticker - Matte Vinyl Decal for Motorcycle Helmets & Toolboxes
Regular price
$4.95
PCM Oak Leaf Sticker
A modern twist on a classic symbol. This bold oak leaf sticker brings heritage and craftsmanship to your favorite gear with premium quality that stands up to the elements.
Why You'll Love It
Premium matte finish – Non-reflective surface delivers clean, professional graphics on any surface
Weather-resistant vinyl – Built to withstand sun, rain, road grime, and temperature extremes
