TJ Brutal Shotgun Exhaust Pipes - Honda Shadow VT/VLX 600 - Black

Upsweep Exhaust for '86-'03 Harley Sportster

• Includes brackets and hardware for stock frames
• 1 3/4" O.D. Upsweep Gooseneck Style

If you are installing this on TC Bros. Hardtail #103-0008 you will need to fabricate a mount on your hardtail to bolt this to

Backdraft Exhaust - Honda VT750 - 2004 & Up Aero Phantom Spirit

The Backdraft Exhaust for the Honda Shadow VT750 Phantom, Spirit and AERO are an unrestricted exhaust pipe design that allows you to get the most out of your Honda Shadows performance!  Click here for VT600 exhaust. 

As shown in the pictures, this exhaust is cerakoted in a satin black finish and fits the Honda Shadow VT750 models with the plastic engine covers with the exhaust cutaway on the bottom. The pipes are designed to sit closer to the bike to keep your leg away from the pipes when riding. Some riders may find that the rear pipe sits too close to the side cover, we recommend trimming the side cover back using a dremel tool. 

Each set includes hardware.
Does not include exhaust gaskets.
Does not include brass tips.

*WILL FIT- 

• Aero and Phantom VT750 2004 - 2022
• Spirit VT750C2 /C2F 2007 and newer 
• Shadow VT400

*WILL NOT FIT-

• Spirit VT750DCA up to 2007
• All VT750 ACE Models 1998-2003
• All VT750DCA Spirit Models 2001-2007
• All VT750 RS Models 2010-2013
• Honda shadow Steed
• Honda Shadow VT600 or VLX 600 or Steed

If your bike has the plastic right side engine cover like the bike in this video - 04 Up Backdraft , THESE WILL FIT YOUR BIKE.

SPECS:

• 16GA steel tubing
• TIG welded contruction
• TJ Brutal Customs DOM exhaust bosses
• 3/8" thick steel collars

All pipes are handmade and will have minor differences from set to set, being the nature of custom handmade parts. You may see some plating differences and weld differences, but all pipes have been inspected to make sure they will have a long life on your bike. Color change is normal, even when plated as they are single wall exhaust.  

It is up to you to know your local laws and regulations. We cannot advise you on what is legal.  These are open pipes and they are not quiet. While wrapping pipes is a cool look, it will void a warranty

Backdraft Exhaust - Honda Shadow VT600 VLX600 88-07

The Backdraft Exhaust for the Honda Shadow VT600s aka VLX600 are a killer exhaust pipe design that is unrestricted and allows you to get the most out of your Honda Shadow's performance!  Or if you don't own a leaf blower, these will do the job in a pinch!  Not only will they direct the exhaust gasses from your road ripping hell-machine into the black-as-sin asphalt, they look darn fine doing it! 

Fits all years of Honda Shadow VT600, VLX, and Steed.
DOES NOT FIT ANY OTHER MODELS. 

SPECS:

• 16ga steel tubing
• TIG-welded construction
• TJ Brutal Customs DOM exhaust bosses
• 3/8" thick steel collars
• Does NOT include exhaust gaskets

NOTE: Due to the fact that our custom exhaust is made by hand - with natural finish pipes, The grind marks and finish texture may vary from set to set.

You will have to tune your bike once these have been installed! Be sure to pick up one of our Performance Tuning Kits - Single Carb, or Dual Carb! Otherwise, your bike will not run properly and you run the risk of doing serious damage to your motor by running too rich or lean. Get that performance tuning kit PRONTO!

Do not wrap these pipes,  doing so will void the warranty as well as increase the chances of corrosion and failure. Please refer to the Support page for an explanation as to why we do not wrap pipes. All pipes are handmade and will have minor differences from set to set, being the nature of handmade, custom parts, you may see some plating differences, weld differences, but all pipes have been checked to make sure that with proper care, they will have a long life on your bike.  The color change is normal on all pipes even when plated as they are single-wall exhaust. If not cared for properly rust and corrosion can even occur on plated pipes. Raw steel pipes WILL rust unless you plate or coat them. 

It is up to you to know your local laws and regulations. These are open pipes and they are not quiet. These pipes are for closed course use only.

Wondering how to install your TJ Brutal Customs backdraft exhaust on your Honda shadow?  Watch this video below!

Magnus V Upsweep Exhaust - Fits Honda Shadow VT600 VLX600

The Magnus V exhaust pipes for the Honda Shadow VLX600 are a simple yet bold descendant of the classic up-swept exhaust of chopper years past. You live your life marching to the beat of your own drum, hell, maybe you even built that drum, and you like it that way! So why should your bike be anything less?  With the throttle screwed in, the only sounds are the wind and the dull rumble of your exhaust pipes. Pure living and inspiration. Inspiration comes in many forms and sometimes the past inspires us to recreate and adapt its cues of style to our lives and our rides. 

Fits all years of VT600, VLX, and Steed.
DOES NOT FIT ANY OTHER MODELS. 

SPECS:

• 16ga steel tubing
• TIG-welded construction
• TJ Brutal Customs DOM exhaust bosses
• 3/8" thick steel collars
• Does NOT include exhaust gaskets

**ORDERS MAY INCUR AN OVER-SIZED SHIPPING FEE**

Made from 16 ga, 1.75" mild steel tubing and TIG welded by the pancake-batter-white, expertly trained hands of a Honda Chopper Geisha (Not really; they're actually welded by a sweaty, tattooed, bearded dude, named TJ, and he is nowhere near as elegant as a geisha). This exhaust is the perfect fit for the individually-styled, chopper-purist rider or the fan of simple exhaust style. 

The ends are a straight cut which allows you to customize with fishtails, mufflers, baffles, or feathers....whatever tickles yer pickle, man! Installing baffles will give the bike a bit more of a tame rumble. 

Each set includes exhaust nuts, and a spacer and nut To mount the pipes to the stock exhaust mount. 

**You will need the stock exhaust mounting stud intact on your bike for these to mount. If you hacked it off, (like I did, oops) you can weld a stud or bolt in its place to hang the exhaust. Raw steel pipes WILL rust unless you plate or coat them. 

Disclaimer shit - For race or show use only... Cuz we have to.