Kustom Tech

1" Classic Line Clutch Assembly

From forged aluminum construction, CLASSIC line cable control matches perfectly our CLASSIC brake master cylinder. Available for clutch and brake side, it fits all 1" handlebars. Both clutch and brake lever assemblies come with 2 cable pins for early and late style cables. The brake lever assemblies work perfectly with mechanical drum brakes, with our wire master cylinder, and in many custom applications. Available in 4 different finishes, polish, satin, raw, and Black. Note: the brass cable register is sold separately.

Micro Switch Clamp - Black Aluminum

Simplify your controls that much more with this clamp that fits into your Kustom Tech controls. Even less clutter on your handlebars! From forged aluminum, this clamp with microswitch fits all Deluxe line and Classic line master cylinder and clutch/brake lever assembly.

Internal Throttle

The design of this block has been updated from the ones used in the past, it allows you to clean up your handlebar's look, by removing the external cable and routing it inside the handlebar.
It's a complete steel construction with internal Teflon components and bearing for a very smooth and fluid action. The outer size measures 1" and fits all original and aftermarket left grips.

Throttle - Aluminum Black

Forged in Italy, these throttles are exactly what you're looking for if you have a custom build with style and quality. Available in 1" and 7/8" 

Rebuild Kit for Clutch and Brake Master Cylinder 14mm (9/16") Bore

Rebuild kit for brake master cylinder 14mm (9/16”) bore

1" Classic Line Clutch Master Cylinder 14mm (9/16) Bore

From forged aluminum construction, with compact size, finned cover, and smooth shape lever, it will give a very retro style look to all handlebar projects. It fits all 1" handlebars, available in 4 different finishes, polish, satin, raw, and black Available with 14mm bore. Perfectly matches with our Classic Line brake master cylinder.

1" Deluxe Line Clutch Lever Assembly 

Made from forged aluminum body, our DELUXE line cable control comes in aluminum clamp with brass or aluminum lever, perfectly matching our deluxe master cylinder, available for clutch side or for brake side, it fits all 1" handlebars. The left side comes with a special cable pin, for early and late cable clutches. The right side works perfectly with mechanical drum brakes, with our wire master cylinder, and in many custom applications. Available in 4 different finishes, polish, satin, raw and black finish. NOTE: the brass cable register is sold separately.

Clutch and Brake Cable Register

Available in stainless steel or brass construction, this clutch, and brake cable register fit with all of the Kustom Tech wire hand controls

M110x1 Thread sold separately not with our wire hand controls.

Clutch Lever Assembly - Black

From forged aluminum construction, CLASSIC line cable control matches perfectly our CLASSIC brake master cylinder. Available for clutch and brake side, it fits all 1" handlebars. Both clutch and brake lever assemblies come with 2 cable pins for early and late style cables. The brake lever assemblies work perfectly with mechanical drum brakes, with our wire master cylinder and in many custom applications. Available in 4 different finishes, polish, satin, raw and Black. Note: the brass cable register is sold separately.

Brake Master Cylinder 14mm (9/16") Bore - Black

From forged aluminum construction, with compact size, finned cover and smooth shape lever, it will give a very retro style look to all handlebar projects. It fits all 1" handlebars, available i 4 different finishes, polish, satin, raw and black. Available with 12mm and 14mm bore, perfectly matches our CLASSIC line clutch lever assembly.

11" Spring Struts

Kustom Tech spring struts built from high-quality steel, with top and bottom eye TIG welded.

Chrome quality spring gives you more comfort than the rigid strut.
Measure 11” from center to center eye mount.

Build with top and bottom Silent Block, fit on HD models with 1/2” shock mounting stud.
Kustom Tech Spring Struts can be mounted in both positions, with top spring or with bottom spring.

Kustom Tech Spring Struts lower the bike below stock, after assembling check the clearance between the rear fender and tire.

Only for custom applications.

Deluxe Line Master Cylinder 12mm - Raw Aluminum/Raw Brass

Made from forged aluminum body, DELUXE line master cylinder comes in an aluminum body with brass lever and brass finned cover or full aluminum. The compact size with finned cover and the smooth lever will give a very retro-style look for all custom projects. It's available with 12mm and 14 mm bore size, perfectly matching our DELUXE line clutch lever assemblies.

Deluxe Line Master Cylinder 12mm - Polished Aluminum

Made from forged aluminum body, DELUXE line master cylinder comes in an aluminum body with brass lever and brass finned cover or full aluminum. The compact size with finned cover and the smooth lever will give a very retro-style look for all custom projects. It fits all 7/8” handlebars, available in 4 different finishes: polish satin raw and black. It's available with 12mm and 14 mm bore size, perfectly matching our DELUXE line clutch lever assemblies.

Deluxe Risers - Raw Brass

From forged brass construction, Deluxe risers come in 5 different finishes. They fit all 7/8” or 1" handlebars and come with 1/2"X13 mounting bolts, 2,5" rise and 1" pullback.

Deluxe Risers - Chrome

From forged brass construction, Deluxe risers come in 5 different finishes. They fit all 7/8" handlebars and come with 1/2"X13 mounting bolts, 2,5" rise and 1" pullback.

Micro Switch Clamp - Raw Aluminum

Simplify your controls that much more with this clamp that fits into your Kustom Tech controls. Even less clutter on your handlebars! From forged aluminum, this clamp with microswitch fits all Deluxe line and Classic line master cylinder and clutch/brake lever assembly.

Single Switch Housing - Raw Brass

Clean and simple. These forged switch housings are as minimalist as it gets while style offering a touch of style. It can be used for many applications. Designed with external fins to match perfectly our Deluxe and Classic line handlebar control, or all early style handlebar projects.

Made to fit 1" and 7/8" bars

Two Switch Housing - Satin Chrome

Clean and simple. These forged switch housings are as minimalist as it gets while style offering a touch of style. It can be used for many applications. Designed with external fins to match perfectly our Deluxe and Classic line handlebar control, or all early style handlebar projects.

fits 1" and 7/8" bars

Throttle - Raw Brass

Forged in Italy, these throttles are exactly what you're looking for if you have a custom build with style and quality. Available in 1" and 7/8" 

Throttle - Polished Aluminum

Forged in Italy, these throttles are exactly what you're looking for if you have a custom build with style and quality. Available in 1" and 7/8"

Two Switch Housing - Raw Brass

Clean and simple. These forged switch housings are as minimalist as it gets while style offering a touch of style. It can be used for many applications. Designed with external fins to match perfectly our Deluxe and Classic line handlebar control, or all early style handlebar projects.

fits 1" and 7/8" bars