Name: OG H4 to AMP Headlight Harness
Brand: Original Garage Moto
Price: 49.95 CAD
Availability: InStock

Motogadget mo.blaze pin

$69.00

🚚 Free Canada-wide shipping on orders over $199

mo.blaze pin

The mo.blaze pin from motogadget – setting new benchmarks for bolt-on turn signals with Power LED technology.

Its tiny dimensions and minimal design make it almost disappear from the vehicle. Due to the IntensiLED® Technology, the emitted light is extremely bright when switched ON and definitely can no longer be overseen. Additionally, the greatest visibility and safety will be ensured by the patented TranzLight® Technology (TLT) with a wide beam angle.

The bolt-on turn signal is ECE approved as a front and rear direction indicator. The aluminum casing is CNC machined and available with an anodized black or mirror polish surface.

Like any other typical LED turn signal, the motogadget turn signal can be operated with load resistors or any of our load-independent flasher relays (m.flash, m.wave, m.stop, m.relay+).

Please order two turn signals for a pair and four turn signals for front and rear use

Advantages

Absolute unique, new design and principle of operation (light control by TranzLight® Technology)
extremely delicate appearance due to the transparent glass body and very small aluminum base
highest luminosity, achieved by state-of-the-art high output LED technology (IntensiLED®)
electronic voltage conditioning by IC-controlled constant power source with 330kHz pulses and safe protection electronics
extremely bright light in radiation direction, highly visible light in nearly all directions

Parts delivered

1x m.blaze pin turn signal w/ M8 thread
M8 nut
Approx. 100 cm connector cable)
Installation instructions

Specifications and features

Total length with thread	38,5 mm
Length without thread	19,5 mm
Biggest diameter	16 mm
Cable length	ca. 100 cm
Weight	ca. 12 g
Installation	M8 threaded bolt
Power consumption	ca. 3 Watt

Motogadget mo.blaze disc

$160.00

🚚 Free Canada-wide shipping on orders over $199

mo.blaze disc

mo.blaze disc by motogadget – a turn signal for handlebar end installation in a trend-setting design.

The mo.blaze disc is the latest generation of turn signal lights. The characteristic feature of the LED turn signal is the transparent light-emitting disc on a compact aluminum base providing the harmonious finish of the handlebar end.

This is already the third generation of our turn signals using the motogadget TranzLight-Technology® (TLT, patent pending). This progressive approach to development is not limited to the miniaturization of turn signal casings. Furthermore, it creates new lighting concepts directly through a crystal-like plastic body. Only the precision of CAD calculations and state-of-the-art manufacturing processes allow this new design and its performance opportunities.

The luminous flux required for the TranzLight technology is generated by the intensiLED® procedure developed by motogadget. It consists of three important pillars:

Specifically selected, high output LED with maximum efficiency and 7W total output and a service life of more than 50,000 hours.
IC controlled constant power source with 330 kHz pulses.
Special collimator optics precisely bundles the emission light from the LED into the plastic body.

The subtle aluminum casing is used for the secure mount of the plastic body only and includes the electronic control system and high-end LEDs. Traditionally, the casing is machined using CNC technology, available with an anodized black or mirror polish surface, and furnished with an elegant finish of laser inscriptions.

The turn signal for handlebar end installation has a very low construction height and, due to the transparent disc, the m.blaze shows up with a very neutral and subtle look. That's why the m.blaze is the perfect match for many styles and all types of motorbikes.

Like any other conventional LED turn signal, the turn signal kit can be operated with load resistors or any of our load-independent flasher relays (m.flash, m.wave, m.stop, m.relais+).

The m.blaze disc has an E mark and front turn signal approval.

Always make sure to order a complete set consisting of the left and right-side turn signal assembly

Advantages

Completely unique, discrete design and functionality
Barely recognizable on handlebar when OFF
Extremely bright light to the front side, well-recognizable light output to the rear side
State-of-the-art, high-performance LED technology called IntensiLED
Electronic voltage conditioning and secure protection circuits
No need for turn signal indicator lights
Quite a harmonious finish for the handlebar end - especially when equipped with m-grip or other billet grips.

Specifications and features

Diameter	35 mm
Overall length	68 mm
Partial length outside handlebar	20 mm
Partial length inside handlebar	48 mm
Cable length	ca. 100 cm
Weight	approx. 40 g
Mounting	Delivered with rubber clamping parts for steel and aluminum handlebars (22 mm and 1 in.) with 14 mm to 21 mm I.D.
Power consumption	approx. 7 Watt

Prism Supply Co - Box Chopper Tail Light

Prism Supply Co - Box Chopper Tail Light

$245.00

🚚 Free Canada-wide shipping on orders over $199

Box Chopper Tail Light

This is the Prism version of the old style "Chopper Box light." It's equipped with a dual function LED cluster that acts as both a brake light and running light. The size of the Prism version housing is 4-1/4" long X 3/4" wide X 2-1/8" in height while the size of the original style is 4-1/4" long 2" wide and 2" in height. The wires exit through the back of the housing. The housing is made of aluminum which gives you the option for polish, chrome, powdercoat or just leave raw.

All lights come with a two stainless steel 1/4-28 bolts spaced 3.5" apart for mounting.

TC Bros. Side Mount License Plate Bracket (with no light)

TC Bros. Side Mount License Plate Bracket (with no light)

$58.95

🚚 Free Canada-wide shipping on orders over $199

TC Bros. Side Mount License Plate Bracket (with no light)

The unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut mounting holes in the bracket. The axle mount hole is .787" diameter so this can be used on Harleys with 3/4" axles and Metric bikes with 20mm axles.

This is the most versatile bracket on the market! Your mounting options and licence plate positions can be mixed and matched to give you the unique look that you are going for.

The bracket is powdercoated gloss black and comes with stainless steel button head bolts/nuts.

Use our LED License Plate Lights/Bolts (TC Bros. #107-0037) to keep your bike legal.

This plate holder is designed for holding a license plate only (not for use with a tail light). For side mounted plate holders with tail lights, please see our other products.

Made in USA.

TC Bros.2 Inch Round Bobber Side Mount Tail Light/License Plate Bracket

TC Bros.2 Inch Round Bobber Side Mount Tail Light/License Plate Bracket

$195.95

🚚 Free Canada-wide shipping on orders over $199

TC Bros. 2 Inch Round Bobber Side Mount Tail Light/License Plate Bracket

Our unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut mounting holes in the bracket. We also include two different mounting brackets so you can either bolt this bracket to your axle or weld the included raw steel slug anywhere on your frame and clamp it to that. The axle mount hole is .787" diameter so this can be used on Harleys with 3/4" axles and Metric bikes with 20mm axles. This is the most versatile bracket on the market! Your mounting options and license plate positions can be mixed and matched to give you the unique look that you are going for. Also included in the kit is the self grounding 12 Volt Brake/Tail Lamp/License Plate light with automotive style bulbs. The bracket is powdercoated gloss black and comes with stainless steel button head bolts/nuts. ALL STEEL BRACKETS ARE MADE IN USA!