Ram Mount Double Socket Arm

Ram Mount Double Socket Arm

$33.95

Double Socket Arm for 'B' size 1" Ball

  • Powder-coated marine-grade aluminum
  • 1" rubber ball size "B"
  • Socket at both ends
  • Overall length 3.69"
  • Socket-to-socket length 3"

Works with GoPro Mount , Tough Claw and Suction Cup Base

You may also like

Quick view
Ram Mounts X-Grip with Tough-Claw - Large Size
$107.95
Quick view
Ram Mounts X-Grip with Tough-Claw - Regular Size
$106.95
Quick view
Ram Mount X-Grip Handlebar Kit for Large Phone/Phablet
$122.95
Quick view
Ram Mount Stem Mount Short Arm
$113.95
Ram Mounts X-Grip with Tough-Claw - Large Size
Ram Mounts X-Grip with Tough-Claw - Large Size
Ram Mounts X-Grip with Tough-Claw - Large Size
Ram Mounts X-Grip with Tough-Claw - Large Size

Ram Mounts X-Grip with Tough-Claw - Large Size

$107.95

X-Grip with Touch-Claw

 The RAM-HOL-UN10-400U consists of the small Tough-Claw™ base and universal X-Grip® cradle for large phones and phablets. The X-Grip® cradle has a clean and clever four-leg design that sports great holding power without hiding your smartphone behind foam pads and plastic. The X-Grip® cradle expands and contracts for the perfect fit of most smartphones. This mount rotates 360 degrees.

The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions:
  • Minimum Width = 1.75" (Minimum Height = 5.5")
  • Maximum Width = 4.5" (Minimum Height = 3.25")
  • Depth = 0.875"
Clamping Range:
  • Rail/Tube Surfaces: 0.625" to 1.5"
  • Flat Surfaces: 0" to 1.14"
Features:
  • Rustproof
  • High strength composite and stainless steel construction
  • Spring-loaded cradle expands and contracts for perfect fit of your device
  • Rubber coated tips will hold the device firm and stable
  • Socket technology allows for multiple adjustment angles and articulation of the device
  • Includes Tether for open cockpit and extreme environments
  • Lifetime warranty
  • Material: High Strength Composite & Stainless Steel
  • Note: The "U" in the part number reflects the product packaged in a poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
  • Weight:0.51 lbs.

You can find replacement X-Grip Post Caps here and Tethers here

Ram Mounts X-Grip with Tough-Claw - Regular Size
Ram Mounts X-Grip with Tough-Claw - Regular Size
Ram Mounts X-Grip with Tough-Claw - Regular Size
Ram Mounts X-Grip with Tough-Claw - Regular Size

Ram Mounts X-Grip with Tough-Claw - Regular Size

$106.95

X-Grip with Touch-Claw 

The RAM-HOL-UN7-400U consists of the small Tough-Claw™ base and universal X-Grip® cradle for large phones and phablets. The X-Grip® cradle has a clean and clever four-leg design that sports great holding power without hiding your smartphone behind foam pads and plastic. The X-Grip® cradle expands and contracts for the perfect fit of most smartphones. This mount rotates 360 degrees.

The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions:
  • Minimum Width = 1.875" (Minimum Height = 4.25")
  • Maximum Width = 3.25" (Minimum Height = 2.25")
  • Depth = 0.875"
Clamping Range:
  • For Rail/Tube Surfaces: 0.625" to 1.5"
  • For Flat Surfaces: 0" to 1.14"
Features:
  • Rustproof
  • High strength composite and stainless steel construction
  • Spring-loaded cradle expands and contracts for perfect fit of your device
  • Rubber coated tips will hold the device firm and stable
  • Socket technology allows for multiple adjustment angles and articulation of the device
  • Includes Tether for open cockpit and extreme environments
  • Lifetime warranty
  • Material: High Strength Composite & Stainless Steel
  • Note: The "U" in the part number reflects the product packaged in a poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
  • Weight:0.51 lbs.

You can find replacement X-Grip Post Caps here and Tethers here

Ram Mount X-Grip Handlebar Kit for Large Phone/Phablet

Ram Mount X-Grip Handlebar Kit for Large Phone/Phablet

$122.95

X-Grip Handlebar Kit for Large Phone/Phablet

  • High-strength composite and stainless steel construction and powder-coated marine-grade aluminum
  • Includes a 1" diameter patent rubber ball and socket system with adjustment points at both ends of the socket arm; this, with a twist of the arm knob, allows you to move the x-grip mount to the optimum viewing position
  • Spring-loaded holder expands and contracts for a perfect fit to the device
  • Rubber-coated tips will hold device firm and stable
  • U-bolt dimensions: 0.5" x 1.25"
  • Cradle is compatible with handheld devices that will fit the following dimensions: minimum width of 1.75" with a minimum height of 5.5"; Maximum width of 4.5" with a minimum height of 3.25"; depth of 0.875"
Ram Mount Stem Mount Short Arm
Ram Mount Stem Mount Short Arm
Ram Mount Stem Mount Short Arm
Ram Mount Stem Mount Short Arm

Ram Mount Stem Mount Short Arm

$113.95

Stem Mount Short Arm Ram Mount

FEATURES

  • Spring-loaded 'X' design with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use
  • Includes motorcycle fork stem base that works with stems 12mm to 38mm in diameter and short length, B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
  • Made of stainless steel components, high-strength composites, and powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
  • Backed by a lifetime warranty

OVERVIEW

Designed to fit into the cylindrical bore wall of fork stems that measure 12mm to 38mm (.5” to 1.49”) in diameter, the RAM-B-176-A-UN10U consists of a fork stem base, short length double socket arm, and the popular spring-loaded RAM® X-Grip® large phone holder. The RAM® X-Grip® features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, this version of the RAM® X-Grip® fits phones ranging from 1.75" to 4.5" in width and keeps your device completely functional and accessible. RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.

HARDWARE INCLUDED

(1) Optional Tether
(1) Glue Tube for Rubber Caps
(1) Expansion Plug for 12mm - 38mm (.5" - 1.49") Fork Stem Holes
(1) M5 x 60mm Machine Screw
(1) Steel Washer Set
(1) Nut Pocket Washer Set
(1) Brass Nylock Nut

HOLDER DIMENSIONS

Width Range: 1.75" - 4.5"
Depth Range: .875" max
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor
Quad Lock 1" Ball Adaptor

Quad Lock 1" Ball Adaptor

$34.99

1" Ball Adaptor

Integrate Quad Lock® with your existing motorcycle RAM mount using the Quad Lock® 1” Ball Adaptor Mount.

SUPER STRONG MOUNTING

The strong, patented dual-stage lock means you can ride with confidence knowing that your phone is secured to your motorbike without the need for cumbersome lanyards, straps, bands or magnets. No matter the terrain.

Use your existing 1” RAM socket arm to securely grip the 1” Rubber Ball Adaptor.

QUICK TO ATTACH / DETACH

No tools needed. The familiar 1” Ball Adaptor makes it quick and easy to install to your existing 1” RAM socket arm at a viewing angle that suits you.

Simply twist and lock to attach your phone. Use the lever and twist to detach.

MINIMALISTIC DESIGN

Reduce the size of your current mount so that your phone sits discreetly on your motorcycle in either portrait or landscape mode.

PLEASE NOTE: Quad Lock Case and 1” Socket Arm Not Included

What's Included:

  • 1 x Quad Lock® 1” Ball Adaptor Mount

Tech Specs:

  • Glass filled nylon
  • Stainless steel hardware
  • Compatible with 1" RAM Socket Arms
Next: Ram Tough Claw Mount With Level Cup Drink Holder
Back to Ram Mounts
Next: Ram Tough Claw Mount With Level Cup Drink Holder