Resurgence Gear

Men's Cafe Racer Jeans Skinny Fit (Black) FINAL SALE

Paying homage to the past the Resurgence Gear has taken the Café Racer Selvedge denim jean and gone back to the traditional way of weaving the jeans on a shuttle loom so as to prevent it from fraying, snagging or curling, and is distinguishable by the red stripes on the edge. The Café Racer provides a relaxed fit and is usually worn with the cuffs turned up; after all why have red stripes if you’re not going to show them off? These jeans are 60% lined with PEKEV

• 12oz Selvedge denim, manufactured in the old fashioned way on a shuttle loom
• Traditional 5 pocket design
• Skinny Fit
• 60% lined, to the top of the boot, with PEKEV™, Resurgence Gear's revolutionary new aramid based lining, covering zones 1, 2 and some of 3
• Inner comfort mesh lining to wick heat and moisture away from the skin
• Available in 2 colours for men or ladies, Raw and washed Selvedge denim
• Hip and knee armour pockets with adjustment.
• Please note that knee and hip armour is not included with these pants
• Black 

Men's Cafe Racer Jeans Skinny Fit (Blue) FINAL SALE

Paying homage to the past the Resurgence Gear has taken the Café Racer Selvedge denim jean and gone back to the traditional way of weaving the jeans on a shuttle loom so as to prevent it from fraying, snagging or curling, and is distinguishable by the red stripes on the edge. The Café Racer provides a relaxed fit and is usually worn with the cuffs turned up; after all why have red stripes if you’re not going to show them off? These jeans are 60% lined with PEKEV

• 12oz Selvedge denim, manufactured in the old fashioned way on a shuttle loom
• Traditional 5 pocket design
• Skinny Fit
• 60% lined, to the top of the boot, with PEKEV™, Resurgence Gear's revolutionary new aramid based lining, covering zones 1, 2 and some of 3
• Inner comfort mesh lining to wick heat and moisture away from the skin
• Available in 2 colours for men or ladies, Raw and washed Selvedge denim
• Hip and knee armour pockets with adjustment.
• Blue
• Please note that armour is not included with these pants

Man's Chino Riding Pants (Navy) FINAL SALE

The City Chinos from Resurgence Gear are a technical pair of chinos for riding your motorcycle in. Motorcycle chinos have become a popular choice for that smart look whilst urban riding and the City Chinos offer great levels of protection with Pekev (Resurgence's own developed protective material which is 200% stronger than the leading aramid fibre and 15 times stronger than carbon steel). Due to the strength of Pekev, the City Chinos are not as bulky as other protective chinos on the market, and there is also an inner mesh lining that wicks moisture away from the body for added comfort.

The Cafe Racer AAA Motorcycle Jeans are the ones that started it all. 12oz selvedge denim with a full PEKEV® lining from waist to ankle — CE AAA certified protection in a slim, modern silhouette. The original riding jean. Still the best.

Protection:

• Outer: 100% Cotton 12oz selvedge denim
• Lining: 32% Aramid, 68% UHMWPE (PEKEV®)
• Full-length protective lining down to the ankles
• CE-certified to EN 17092 — Class AAA
• D3O® Ghost knee protectors included (Level 1) — height-adjustable
• D3O® Ghost hip protectors included (Level 1)
• Available in waist sizes 32–38 and inseam lengths 32 and 34

Care Instructions:

• Remove D3O® Ghost protectors before washing
• Machine wash gentle cycle, cold water, mild detergent
• Do not tumble dry — hang to dry
• Avoid bleach and fabric softeners
• PEKEV® protection is permanent and does not wash out

The Warrior AA Motorcycle Jeans are where PEKEV® protection starts. CE AA certified, built tough, and priced for riders who want real protection without the premium price tag. A jean that earns its name every ride.

Protection:

• Outer: Promodal® stretch denim with PEKEV® Lite protective lining
• CE-certified to EN 17092 — Class AA
• D3O® Ghost knee protectors included (Level 1) — height-adjustable
• D3O® Ghost hip protectors included (Level 1)
• Full-length protective lining down to the ankles
• Available in waist sizes 32–38 and inseam lengths 32 and 34

Care Instructions:

• Remove D3O® Ghost protectors before washing
• Machine wash gentle cycle, cold water, mild detergent
• Do not tumble dry — hang to dry
• Avoid bleach and fabric softeners
• PEKEV® protection is permanent and does not wash out

The Cafe Racer AAA Motorcycle Jeans are the ones that started it all. 12oz selvedge denim with a full PEKEV® lining from waist to ankle — CE AAA certified protection in a slim, modern silhouette. The original riding jean. Still the best.

Protection:

• Outer: 100% Cotton 12oz selvedge denim
• Lining: 32% Aramid, 68% UHMWPE (PEKEV®)
• Full-length protective lining down to the ankles
• CE-certified to EN 17092 — Class AAA
• D3O® Ghost knee protectors included (Level 1) — height-adjustable
• D3O® Ghost hip protectors included (Level 1)
• Available in waist sizes 32–38 and inseam lengths 32 and 34

Care Instructions:

• Remove D3O® Ghost protectors before washing
• Machine wash gentle cycle, cold water, mild detergent
• Do not tumble dry — hang to dry
• Avoid bleach and fabric softeners
• PEKEV® protection is permanent and does not wash out

The Kingston AAA+ Motorcycle Shirt is the one you reach for every day — a riding shirt that looks and moves like your favourite overshirt, with CE AAA+ certified PEKEV® protection built into every thread.

Protection:

• Outer: PEKEV® Ultra Lite — single-layer, abrasion-resistant, cotton-lined
• CE-certified to EN 17092 — Class AAA
• D3O® Ghost shoulder, elbow and back protectors included (Level 1)

Care Instructions:

• Remove D3O® Ghost protectors before washing
• Machine wash gentle cycle, 30°C / 86°F max
• Do not tumble dry — lay flat or hang to dry
• Do not dry clean or bleach
• PEKEV® protection is permanent and does not wash out

The Wellington AAA+ Hooded Motorcycle Sweater is your favourite hoodie — CE AAA+ certified. Ultra-breathable, soft, and comfortable enough for everyday commuting and warm-weather rides. PEKEV® protection built in, visible to no one. Available in Green and Brown.

Protection:

• Outer: Abrasion- and UV-resistant High-tenacity Nylon 6.6 with cotton fleece — lightweight and breathable
• PEKEV® protective lining in key impact zones
• CE-certified to EN 17092 — Class AAA
• D3O® Ghost shoulder, elbow and back protectors included (Level 1)
• Sizes Small through 4XLarge

Care Instructions:

• Remove D3O® Ghost protectors before washing
• Machine wash gentle cycle, 30°C / 86°F max
• Do not tumble dry — lay flat or hang to dry
• Do not dry clean or bleach
• PEKEV® protection is permanent and does not wash out

The Richmond AAA+ Hooded Motorcycle Jacket is for riders who want real protection without a technical jacket look. Single-layer PEKEV® Ultra Lite, CE AAA+ certified, with a soft Tencel fleece hood and a clean profile that fits in anywhere. From the parking garage to the coffee shop — no jacket change required.

Protection:

• Outer: 57% Cotton, 40% Nylon, 3% Elastane
• Single-layer PEKEV® Ultra Lite with reinforced impact zones
• CE-certified to EN 17092 — Class AAA
• D3O® Ghost shoulder, elbow and back protectors included (Level 1)
• Fixed Tencel fleece hood — adjustable fit
• 4 outer pockets (2 zipped) + 2 inner pockets

Care Instructions:

• Remove D3O® Ghost protectors before washing
• Hand wash preferred — or gentle machine cycle, cold water
• Do not tumble dry — hang to dry
• Do not iron or dry clean
• Avoid bleach and fabric softeners
• PEKEV® protection is permanent and does not wash out

The Adelaide AAA+ Motorcycle Fieldjacket is classic field jacket styling with CE AAA+ certified PEKEV® protection built in. Lightweight waxed cotton, water-resistant membrane, four utility pockets, and protection that disappears into the fabric. Built for the road — and every destination after.

Protection:

• Outer: 60% Cotton, 40% Polyamid — waxed, water-resistant
• Waterproof membrane: 55% Polyester, 45% Polyurethane
• Single-layer PEKEV® Ultra Lite — reinforced in impact zones
• CE-certified to EN 17092 — Class AAA
• D3O® Ghost shoulder, elbow and back protectors included (Level 1)
• Four utility pockets including two chest flap pockets
• Adjustable cuff with snap buttons

Care Instructions:

• Remove D3O® Ghost protectors before cleaning
• Spot clean with a soft damp cloth — do not machine wash
• Do not tumble dry — hang to dry in a ventilated area
• Do not iron directly on waxed surface
• Re-wax periodically to maintain water resistance
• PEKEV® protection is permanent and does not wash out