Tech-Air® Off-Road is an FIM homologated Airbag System designed specifically to handle the rigors of Rally riding and provide unrivaled upper body protection. Developed and tested since 2017, in the most grueling conditions of the Dakar Rally, the world’s toughest off-road race, the Tech-Air® Off-Road System offers the most advanced active airbag technology for off-road riding. The Tech-Air® Off-Road System, with the active airbag inflated, delivers CE Level 1 full Chest and full Back protection, plus coverage to the shoulders, neck, and collarbones in the event of a crash. The System is integrated with an Alpinestars Off-Road Protection Jacket that is equipped with a Level 1 passive full back and limb protection, integrated protection on the arms and a CE Level 2 passive full chest protector to offering riders enhanced roost protection against rocks, debris, and other obstacles they may come into contact with on the trail. Built tough enough to tackle any terrain, the System comes pre-loaded with three Riding Modes; ENDURO, RALLY, and STREET, making it the perfect choice for every type of off-road and street riding.
TECH-AIR® OFF-ROAD RIDING MODES: ENDURO, RALLY, AND STREET
The Tech-Air® Off-Road System provides protection in ENDURO, RALLY, and STREET Modes including crashes against obstacles and loss of control falls (commonly referred to as ‘low-side’ and ‘high-side’ type falls).
•ENDURO Mode is optimized for low and medium-speed trails where the User rides on unpaved surfaces like gravel, riverbeds, mud, and other natural terrain. Typically, these riding scenarios include several changes in riding directions, tackling obstacles and hills at lower speeds. •RALLY Mode is optimized for fast off-road action on any type of terrain and recommended for riding characterized by longer straight sections with multiple bumps and different types of terrain crossed at higher speeds, unlikely encountered in typical Enduro competitions. Typical environments where these riding scenarios occur are mainly characterized by desert terrain (with dunes and sandy ground), gravel and open countryside settings. •STREET Mode is optimized for asphalt roads including situations in which the rider’s motorcycle is hit by another vehicle while stopped.
Protection
FIM Cross Country Rally Regulations Homologated for race use. • Proven to be more than twice as protective as passive impact protectors. • Dual gas inflators deliver two airbag deployments for guaranteed protection. • Average inflation time of 52 milliseconds (depending on the size of the airbag). • Airbag coverage on chest, back, shoulders, and neck provides upper body protection. • Neck protection is provided by the airbag inflating around the neck in compliance with the FIM regulations. • The airbag has been fully certified for up to 4 airbag deployments before having to replace it, providing the airbag hasn’t been damaged in one of the first 3 deployments. • Performance tested according to DOLOMITICERT S.c.a.r.l. M.16.03.001.1 Protocol for Airbag Protectors Rev. 5 5/07/2022 on ENDURO, RALLY, and STREET algorithms. • Performance tested according to DOLOMITICERT’s Technical Disciplinary for Inflatable Protectors with Electronic Activation Revision 5 dated 13 October 2023. • IMPORTANT: neck protectors are NOT compatible with Airbag Systems, accordingly, the Tech-Air® OFF-ROAD System is NOT compatible with the use of Alpinestars’ Bionic Neck Support (BNS) nor any other neck protections. • ALPINESTARS OFF-ROAD PROTECTION JACKET TECH SPECS • Premium materials combined with an innovative design and honeycomb Nucleon Cell technology create a passive protector that is highly ventilated, lightweight, ergonomic, and robust. • Constructed from a breathable stretch mesh for superior ventilation while keeping the protection close to the rider’s body, the protective garment is CE CE-certified Class C undergarment. • Slim fit stretchable fabric construction features a floating, highly ventilated, and flexible thermoformed chest protector for an optimal riding experience. • Both the chest and back protectors incorporate new Nucleon CELL Technology which is light, flexible, and highly ventilated for enhanced performance. • The Protection Jacket’s passive Chest protector is certified to CE Level 2, while the Back, Elbow, and Shoulder protectors are certified to CE Level 1, providing additional protection against impacts in key areas; elbows and shoulders protectors are replaceable. • Lateral zipper for a better fit and ease of use, which allows the jacket to provide complete front chest protection. • Ergonomic design delivers exceptional rider comfort and freedom of movement. • Additional front padding on the arms and chest for enhanced roost protection. • Water bladder compatible: back holder for a Hydration pack with 1.5-3 Liter capacity already included.
AIRBAG System Tech Specs
• Robust internal housing located in the built-in CE-certified Nucleon CELL back protector accommodates the System ECU and gas inflators, allowing the Tech-Air® Off-Road System to be worn with any Alpinestars’ Tech-Air® Ready jacket or any properly fitting motorcycling jacket.
• The Tech-Air® Off-Road System’s ECU is seal-protected within the vest to ensure all-weather performance and the vest and componentry are certified to function between -10°C and 50°C.
• The ECU has been homologated to ECE R10 04 which ensures the unit’s electromagnetic integrity and stability.• Bluetooth connectivity to a Tech-Air® App means the System’s operational status, battery status and My Ride Trip recording can also be easily accessed on a mobile device, subject to network coverage.
• Users can easily update the System’s firmware when improved crash-detection algorithms are released via the Tech-Air® App.
Key Features
• The world’s first dedicated off-road Airbag System, Tech-Air® Off-Road comes with 3 Riding Modes; ENDURO, RALLY, AND STREET.
• Riding Modes are easy to navigate while on the move via the LED Display located on the front of the System, or via the Tech-Air® App.
• The Tech-Air® OFF-ROAD System features dual charge capability which means that with two full gas inflators, the System provides two separate airbag deployments, since only one gas inflator will deploy to inflate the entire Airbag System during a crash scenario.
• Quick release cover opening allows for rapid gas inflator replacement by the user, only available in countries where gas inflator replacement by individuals is permitted by local regulations.
• A fully self-contained, standalone system; 3 accelerometers (1 triaxial accelerometer) and 3 gyroscopes (1 triaxial gyroscope) are integrated into the Electronic Control Unit (ECU) to provide the best crash monitoring performance and active airbag protection in a variety of dynamic off-road riding scenarios. No external sensors are required for the system to operate.
• The Tech-Air® OFF-ROAD System uses an integrated, certified lithium-ion battery, with a fully charged battery life of 30 hours and a recharge time of approximately 4 hours; charging the battery for approximately 1 hour will provide approximately 8 hours of riding time use.
• The LED Display features an integrated charging port for convenient and easy charging of the System; simply plug the USB-C cable into the Recharge Port on the System’s LED Display and connect it to a power source.
• Ease of use; to turn on the Tech-Air® Off-Road System, simply zip up the System and it will automatically turn on and activate the Airbag System. To deactivate the airbag, unzip the System and it will automatically turn off.
• A dedicated Shipping Mode slide switch is located on the ECU, which when turned on effectively puts the System into sleep mode. Only accessible once the Electronic Case on the back protector is removed, the Shipping Mode switch allows the battery to be disconnected from the System during transportation or when the System will not be in use for a prolonged period of time. The System is sold with the Shipping Mode turned on, make sure to turn the Shipping Mode off when you open the box and use the Airbag System for the first time.
• The Tech-Air® Off-Road System’s Electronic Control Unit (ECU) and airbag are completely removable so that the Protection Jacket can be washed separately
Can I just say that I F@$#ing LOVE THESE RIDING PANTS!!! and I think everyone needs to try these bad boys on and see for yourself. Love Love Love 'em!!! AND THESE ONES ARE HIGH WAIST WOOT WOOT!
Are you looking for protective, comfortable and stylish riding pants??? It seems like an unrealistic combination, right?
Look no further! Perth County Moto has partnered with GoGoGearLA to offer their Kevlar Leggings here in Canada!
Fabric Inner Layer: 100% Made Of DuPont™ Kevlar® Fibers, 275gsm Weight, 95% Kevlar with 5% Spandex FULLY LINED WITH KEVLAR FROM TOP TO BOTTOM - NOT JUST IN THE KNEE AND SEAT AREA
Fabric Inside Protector Pockets: Polyester Cotton Jersey
Inside Pockets for Hip Protectors (protectors not included)
Two Outside Front Pockets
Ribbed Decorative Detail on Knees
Machine Washable
The HIGH-WAIST style offers you an additional 2" on the waistband but fit the same as the regular version.
CAUTION: THE US SIZES 4 - 12 RUN SMALL! DO NOT SELECT A SIZE BASED ON YOUR CURRENT PANT SIZE! All SIZES FROM 14 UP RUN "TRUE TO SIZE" MEANING YOU CAN ORDER THEM BASED ON YOUR REGULAR US PANT SIZE!
PLEASE CONTACT LINDZ AT INFO@PERTHCOUNTYMOTO.COM IF YOU NEED ASSISTANCE WITH SIZING. WE WANT TO ENSURE YOU GET THE BEST FIT AND ARE HERE TO HELP! HELPFUL HINT: I'VE FOUND THE BEST WAY TO DETERMINE THE PROPER SIZE IS TO TAKE YOUR FULLEST MEASUREMENT (HIPS, BUM) AND USE THAT AS YOUR LOWER HIP MEASUREMENT.
NOTE: If you are 5'9" & taller the GoGoGear Leggings Long Version is what you need! These are listed separately on our website. The size chart runs more true to size so please refer to the size chart and order accordingly.
MotoGirl Lara Cargo Riding Pants - Black
Regular price
$395.00
Lara Cargo Black Trousers
It's no secret who these cargo trousers were named after and once you put these on, you'll feel as kick-ass & adventurous as her when you're on your bike! These Lara's are great with boots, or long enough to go over ankle boots or shoes. Wear as casual when off the bike, they will become your favourite trousers!
SIZING: The sizing chart is fairly accurate to fit and the waist adjustment buckles allow you to snug up the waist to eliminate any gaps.
Lindz wears a size 2XL in the Lara Cargo pants with a natural waist (39") and hip (42"). She is 5'9" and wears the regular inseam with a bit of length to spare! The tall inseam works well for anyone 5'10" & up. Please reach out if you have any questions!
Key Features:
UKCA & CE Certified A rate garment
CE Level 2 Knee & Hip protection included in a re-usable drawstring bag
Adjustable velcro knee armour pockets
Waist adjustment buckles front and back
Belt loops
Zip & Snap button closure
Two front raised leg pockets one zip closure the other magnetic closure
Deep front & back pockets
Hidden coin pocket
Breathable moisture wicking mesh lining inside
Stretch ribbing at the ankle
Available in sizes XXS-5XL
Available in 3 inseams
Petite and Tall are special order products and come from the UK warehouse. It will take approx 2 weeks to arrive at our store.
PERFORMANCE & PROTECTION Certified Garment: Class A EN 17092-4:2020 Knee & hip protection: Level 2 EN1621-1:2012
Can I just say that I F@$#ing LOVE THESE RIDING PANTS!!! and I think everyone needs to try these bad boys on and see for themselves. Love Love Love 'em!!!
Are you looking for protective, comfortable, and stylish riding pants??? It seems like an unrealistic combination, right?
NOTE: The Tall leggings are a completely different product from our regular leggings. Please do NOT use the size chart for our regular leggings to order this item. See the measurement chart attached for this product.
PLEASE CONTACT LINDZ AT INFO@PERTHCOUNTYMOTO.COM IF YOU NEED ASSISTANCE WITH SIZING. WE WANT TO ENSURE YOU GET THE BEST FIT AND ARE HERE TO HELP! HELPFUL HINT: I'VE FOUND THE BEST WAY TO DETERMINE THE PROPER SIZE IS TO TAKE YOUR LARGEST MEASUREMENT (HIPS, BUM) AND USE THAT AS YOUR LOWER HIP MEASUREMENT.
HOW TO DETERMINE THE BEST SIZE TO ORDER:
1. Measure all the way around the widest part of your hips and rear end
2. Take that number and compare against the size chart below to find the size that matches or is closest to your measurement
3. If you consider yourself to have a "flat" rear end, go with the size listed. If you have a "curvy" or "extra" in the rear, go one size up.
Fabric Inner Layer: 100% Made Of DuPont™ Kevlar® Fibers, 275gsm Weight, 95% Kevlar with 5% Spandex FULLY LINED WITH KEVLAR FROM TOP TO BOTTOM - NOT JUST IN THE KNEE AND SEAT AREA
Fabric Inside Protector Pockets: Polyester Cotton Jersey
Inside Pockets for Hip Protectors (protectors not included) See below for links to where you can purchase the hip protector pads separately
Two Outside Front Pockets
Ribbed Decorative Detail on Knees
Machine Washable
MotoGirl Daisy Dungaree Riding Pants - Black
Regular price
$420.00
Daisy Dungaree Trousers
Ride all summer long in our single-layer, lightweight, and protective Daisy Dungarees!
Key Features:
CE & UKCA Approved Class AA rate garment
CE Level 2 Knee & Hip protection included
Stretchy
Belt loops
Side zip closure
Large front bib zip pocket
Adjustable braces
Deep Front and Back Pockets
Adjustable knee protector pockets
MotoGirl Branding patch on the back
Available in sizes XXS-5XL
Available in 3 inseams
Tips for sizing:
The Dungarees are fitted and true to size. After a few hours of wear they do mould to your body shape. Measure all around waist and hips, make sure the hip measurements are slightly less than on the sizing chart. Adjust the shoulder straps to lower or increase length until comfy.
PERFORMANCE & PROTECTION Certified Garment: Class AA EN 17092-3:2020 Knee & hip protection: Level 2 EN1621-1:2012
DuPont™ and KEVLAR® are trademarks of affiliates of DuPont de Nemours, Inc.
John Doe Shifter - Black
Regular price
$279.00
Shifter
Shifter XTM® is a light and zazzy leather sneaker boot without compromises on safety. We’ve made sure of this with a membrane in XTM-Fiber® giving you additional ankle, heel, and forefoot reinforcement. Leather shift protection gives you additional grip while shifting through the gears. The water barrier on the tongue helps keep water from washing into the boot; a zipper on the side adds convenience and comfort. As you’d expect, Shifter XTM® is also fitted with an oil-resistant, vibration-absorbing non-slip sole.
Material and details:
CE certification EN 13634:2017
XTM-Fiber®
Vintage cowhide leather 1.1 mm (black, brown)
Water-repellent and breathable
Three-point protection (ankle, heel, and forefoot reinforcement)
