Motogadget mo.unit blue

Regular price $549.95

mo.unit blue

The new m.unit blue has moved on from the established previous version by undergoing significant development and improvements. It is now equipped with 12 inputs and 10 outputs, replaceable high-quality cable clamps, and, most notably, Bluetooth® LE. This enables the m.unit blue to be connected to our ‘m.ride’ smartphone App. This feature is unique for motorbike accessories. 

The m.ride App manages the entire setup and alarm system. Fault diagnostics can also be performed during operation and without having to remove the m.unit. The secure, encrypted Keyless Go function can also be used. 

When this function is activated and you approach your motorbike with your smartphone, the onboard electrical system is activated and the motorbike is ready to be started. 

The m.unit blue is the digital control unit for your motorbike – the heart of the entire onboard electrical system. It can be operated using buttons or using conventional handlebar switches. It controls all necessary components of the vehicle while also performing fuse functions. 

There are considerably fewer relays and individual components in the wiring harness and the vehicle can be rewired with less effort in a very short amount of time. 

When using the m.button, all switch connections are reduced to one single cable.

Features WITHOUT smartphone and m.ride App

  • Complete digital control using buttons possible with 4 or 5-button operation.
  • Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off if there are faults. After the fault is rectified, the safety function is automatically reset.
  • An integrated alarm system that can be installed in any position.
  • Integrated, digital flasher relay that is load-independent; automatic switch-off optional and can be set; m.wave mode can be selected.
  • Integrated hazard warning light.
  • The turn signal can optionally be set as a positioning light.
  • Integrated parking light and headlight flashing.
  • Lo-beam and Hi-beam (up to 200 W switched capacity) can be controlled using only one button.
  • Integrated, digital brake light modulator; flashing mode can be programmed.
  • Acceleration-controlled emergency brake light (automatic warning signal).
  • Integrated starter relay for the starter system with solenoid (up to 30 A switched capacity).
  • Intelligent and configurable management/switch-off of power-consuming devices so that the maximum starting energy from the battery can be used when starting the motorbike.
  • Integrated, digital horn relay.
  • Two configurable additional outputs AUX1 and AUX2.
  • Diagnostics function for assigning inputs, outputs, the circuit switching status, short circuit diagnostics, etc.
  • Calibration and current measurement enable faults to be detected on all lamps.

Features WITH smartphone and m.ride App

  • Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and m.unit blue energy usage.
  • Keyless Go (the onboard electrical system is switched on when you approach the motorbike with your smartphone).
  • Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor, etc.).
  • Alarm system mode and sensitivity can be adjusted.
  • The onboard voltage can be monitored in the App.
  • Diagnostics on all inputs and outputs; current, voltage, and device temperature measurement.
  • Real-time audio fault messages are issued via the helmet headset.
  • Outputs can be switched manually via smartphone (except for starters).
  • Firmware updates are provided anywhere via smartphone and App without removal.
  • The setup menu can be configured anywhere via smartphone and App without removal.
  • Speedometer input for comparing the vehicle mileage with m.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs, etc.
  • Logbook for recording journeys and displaying the vehicle status, alarm events, and maintenance tasks.
  • Parking position display and Ping! for help locating the vehicle.
  • LIN bus connection for connecting to compatible motogadget products at a later date.

Technical requirements

The m.ride App is available for Android devices on the list below. The version for iOS is available for iPhone 5 and later. 

Bluetooth 4.0 require the latest generation of smartphones. We guarantee full functionality with recent software updates on explicit all following Android devices ONLY:
 

  • Samsung Galaxy S8/S8+
  • Samsung Galaxy S7/S7 Edge
  • Samsung Galaxy S6/S6 Edge
  • Samsung Galaxy S5/S5 Neo
  • Samsung Galaxy Note 4
  • Samsung Galaxy Tab S2 10.5
  • Samsung Galaxy Tab A (2016)
  • Samsung Galaxy Note 5
  • Google Pixel/ Pixel XL
  • Google Nexus 5
  • Google Nexus 5X
  • LG G4
  • LG G5
  • Sony Experia Z3 Compact
  • OnePlus 3/OnePlus 3T
  • Huawei P9/ P9 Plus


  • Further information on the App can be found at mride.de or in Google Play and iTunes.

    Scope of delivery

    • m.unit blue
    • 1 x M5 stainless steel bolt
    • 2 x M5 stainless steel bolts with nut
    • 1 x speed sensor with 2 magnets
    • Detailed installation and operating instructions

    Specifications and features

    L/W/H 90 x 53 x 30 mm, bolt distance 74 mm
    Weight Approx. 180 g
    Fastener 2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery Plus
    Operating voltage 6 V - 20 V
    Operating temperature -20°... +80°C
    Inputs 1 x input (+12 V switched) for the ignition lock or m.lock 

    11 x control input (minus/switched to ground) for:
    Left turn signal
    Right turn signal
    Lo/Hi-beam
    Starter
    Horn
    Brake light
    Kill switch
    Stand switch
    LIN bus
    AUX1
    AUX2
    Outputs 10 x Outputs (+12V) for:
    Left turn signal
    Right turn signal
    Lo-beam
    Hi-beam
    Starter
    Horn
    Brake light
    Ignition
    AUX1
    AUX2