All

Our Risers Cable Rail Accessories Mount allows you to use all our Risers Accessories and mount them on any of our Risers using the internal wiring rails to attach. It can be used on both side of your risers. Use our Extension Arms to put your gauges &/or any of our risers accessories exactly where you want them providing you with endless possibilities with how you want your setup! Can be combined with our Single or Dual Accessories mount for multiple accessories setup (2+).

*For use with OG Risers only. For universal fitment check out our Universal Risers Accessories Mount.

Installation

Click here for OG Risers Cable Rail Accessories Mount installation guidelines

Our OG Batwing Fairing Clamps will enable you to run our Top Triple Tree for Harley-Davidson Touring models (or aftermarket touring top tree options) on your Street glide (and most batwing equipped models) & Road King models. Clamps on both 49mm fork tubes to provide very solid Batwing Fairing lower mounting points.

*Road King models: Please be aware our OG Batwing Fairing Clamps will be required when installing our Touring Top Triple Tree to remount the headlamp nacelle.

**Use one set for our Top Triple Tree and two sets for our Triple Trees Kit

Features

• 
  CNC machined 6061 T6 aluminum


• Enable you to run our Top Triple Tree or most aftermarket touring top tree options on Batwing Fairing equipped models & Road King models


• Black Hard Anodized finish


• Stainless steel hardware included

Fitment

• Fits 2014-2023 present 49mm Touring models Street Glide & Road King models


• Will not fit 2023 CVO models equipped with an inverted front end

Our OG Top Triple Tree for Harley-Davidson models will allow you to set your Risers exactly where you want them. Use these extra adapters to run your risers at +1'' pullback towards the rider.

*Will not fit/clear Touring models with Batwing Fairing.

Features

• 
  CNC machined 6061 T6 aluminum


• Enable you to run your risers at +1'' pullback towards the rider position.


• Black Hard Anodized finish


• Fits with all our OG Top Triple Trees kit
  


• Will not fit/clear Touring models with Batwing Fairing

Now available for Indian Chief, our OG Billet Gauge(s) Pod(s) will allow you to relocate your stock gauge(s) setup onto our Billet Risers setup. Our unique design is fully adjustable in angle so you can put your gauge(s) exactly where you want to see them. 

This modular kit can be mounted to the front or the rear of our risers. Front mount option will require the use of additional Extension Arms purchased separately for that perfect placement. These come with Real Carbon Fiber Backing.

This kit includes everything you need to mount on our Risers. If you need to mount accessories in the front & in the back of your risers, you'll need to buy our OG Riser Dual Accessories Clamp.

Features

• Will work with any of our risers (Pull Back & Straight)


• Adjustable tilt


• CNC Machined 6061 T6 Aluminum


• Hard Anodized finish


• Carbon Fiber Backing


• Stainless steel hardware included


• 
  Indian Chief Speedometer & Instrument Extension Harness is required for easy installation.


• Fits 2021+ Indian Chief, Chief Dark Horse & Chief Bobber Dark Horse with 4'' gauge.

Our modular Risers feature a 3-piece design that allows riders to choose from a pull back or straight riser and 3 different rise heights. It also features inner grooves machined from the clamping area down into the risers using included CNC machined aluminum small covers to hide the control wires inside for a cleaner installation. Multiple colors available.

* Works with any standard 1 1/8" handlebar (most MX Style bars). Use our shims set to run your favorite 1" handlebar.

** Our Digital Gauge Clamp will fit with the KOSO D2 Gauge for all models including baggers. Installation requires the KOSO D2 gauge rubber gasket, sold separately.

*** We strongly recommend polyurethane bushings for risers lower than 9” and solid bushings for risers higher than 9”.

Features

• Works with any standard 1 1/8" handlebar (most MX Style bars)


• Use our shims set to run your favorite 1" handlebar


• CNC Machined 6061 T6 Aluminum


• Hard Anodized finish


• Machined OG logo
  


• Base hole tapped for OEM mounting bolts


• Fits on all models with 3.5" center on center riser spacing (most H-Ds models)


• Sold in pairs with top clamp & inner grooves small covers


• Stainless steel hardware included


• Available with M8 Softails integrated Digital Gauge Clamp
  


• Top Clamp pre-drilled for various accessories mounting including all our Instruments and Gauges Bezels 
  


• Our Digital Gauge Clamp will fit with the KOSO D2 Gauge for all models including baggers. Installation requires the KOSO D2 gauge rubber gasket, sold separately
  
  

Installation

Click here for installation instructions

Our OG Gauge(s) block-off plates will cover your dash unused holes leftover after you relocate your gauges to your bars.

Features

• 
  Made of 6061 T6 Billet Aluminum


• Available all Hard Anodized colors & Chromed finishes


• Machined OG logo


• Dash seal included
  


• Stainless steel mounting hardware included

Fitment

• Softail Low Rider S (FXLRS) 2020-2021


• Softail Fat Bob (FXFB(S)) 2018-2023


• Softail Lowrider (FXLR) 2018-2020


• Dyna Lowrider (FXDL) 2004-2017


• Dyna Low Rider S (FXDLS) 2016-2017


• Also fits most Dyna models with stock tank mounted Gauge(s)


• Compatible with models equipped with 4" gauges.


• Not compatible with Fat Bob or Road King models featuring the 5" gauge.

Our OG T-Sport Fairing Kit for the Harley-Davidson Softail Low Rider S FXLRS allows you to run our reproductions of the classic FXDXT fairings. Made to be bolted to the stock lower tree this kit includes everything you need to improve wind deflection on your ride without breaking your bank!

Now available for FXLRS OEM Headlight or with our more powerful 5.75'' LED conversion kit which includes our OG 5.75'' Headlight Bucket with OEM style connector (plug & play) & your choice of our OG 5.75'' LED Headlight styles. 

*If available on our website it means we have the kit in stock. All Fairing kits are made & assembled by the order. Please allow a maximum of 5 days processing time for any fairing kits in stock purchases.

**We now offer FXRLS color-matched fairings in most OEM colors. We only use H-D OEM paint for that premium finish. If it's available it means we have it in stock too! If we don't, please allow 3-4 extra weeks for the paint process.

***OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models.

Features

• ABS Injection Molded Shell


• 
  White Sand Pearl Color matched fairings with black headlight bezel
  


• 12 & 15 inch recurved windshields available in multiple colors


• Pre-installed Back Brackets black painted


• Stainless steel hardware included


• CNC Machined complete Headlight Conversion bracket kit included


• Optional anti-buffeting kit included


• 
  Fully adjustable Billet windshield arms included


• Fit all 2020 to present Softail FXLRS & FLSB models


• OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models.

Fitment

• Fits all 2020 to present Softail FXLRS


• Fits all 2019 to present Softail FLSB 


• 
  OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models
  
  

*If your motorcycle is equipped with an OG Top triple tree, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees in order to run your T-Sport Fairing with the OG Top Triple Tree.

**When using an OG projector or X Series headlight on 2018+ Softail models, error code B216615 – Running Lamp Circuit Open may appear. This does not affect the performance or proper functioning of the headlight.

Installation

Click here for installation instructions

Introducing the Ultimate Performance Braking Upgrade for Touring models. Our OG 13" Complete Radial Big Brake Kit for 2008-2023 Touring models unleashes the full potential of your performance bagger using the Brembo M4 Monobloc radial calipers. This kit will deliver top-tier performance for riders who demand nothing but the best. For use with Stock lowers or most conventional fork lowers aftermarket options.

Features

• 
  Galfer 13" Oversize Floating Wave Rotors Included


• Comes with Brembo M4 Monobloc radial calipers. Renowned for their precision and consistent performance, these calipers guarantee optimal force distribution and fade resistance, even in the most demanding conditions


• Customizable Radial billet spacers colors


• 
  CNC machined 6061 T6 aluminum Radial Bracket available in multiple colors


• Includes ARP Caliper Bracket Hardware

Fitment

• Fits most 2008-2023 Touring models with Spoke Mounted Rotors
  


• Require brake line replacement. The length depends on routing,  front-end setup & height.


• Compatible with ABS


• 
  Will not fit wheels with Hub Mounted Rotors


• For 2014-2023 models, we recommend the +2 option of our OG 2014-2023 Touring Lower Brakes Lines

Note: Rotor(s) ARP hardware is not included and must be purchased separately.

Contact us if you have any questions about the fitment of this product.

Installation

Click here for installation instructions

Introducing our Radial Mount  Brake Caliper Bracket V2. These mounts are included in all our Radial conversion Big Brake Kits. Now features M10x1.25 Radial Mount threaded fixtures that allows the uses of ARP Hardware (Sold separately). Stainless steel hardware included.

Made from billet aluminum, our OG Radial Brake Caliper Bracket allow you to use any 108mm radial mount sportbike calipers. It's a great affordable way to drastically increase your stopping power. Time to change those poor stock H-Ds calipers! Fits on both left or right side no problem. If you have dual disks, you'll need to order two brackets.

*The bracket includes hardware designed for compatibility with stock-size rotors (up to 11.8").

**For a complete upgrade, check out our OG 13" Complete Radial Big Brake Kit.

***If you already have oversized rotors and radial calipers, contact us for fitment assistance.

Features

• 
  CNC machined 6061 T6 aluminum


• Hard Anodized finish


• Stainless steel hardware & shim set included


• Fits all 00'-later Harley-Davison models with mag wheels


• M10x1.25 Radial Mount that allows the uses of ARP Hardware


• For use with 108mm radial mount calipers such as our Brembo M4 or 05-up GSXR Tokiko's, Brembo GP series 108mm radials, 2004-up YZF R1 Sumitomo radials, etc.


• Sold individually

*Can fit spoke wheels using bigger rotors on stock 2000 and up Harley forks. Please check caliper to spokes clearance.

Our OG T-Sport Fairing Kit for the Harley-Davidson Softail Low Rider S FXLRS allow you to run our reproductions of the classic FXDXT fairings. Made to be bolted to the stock lower tree this kit includes everything you need to improve wind deflection on your ride without breaking your bank!

Now available for FXLRS OEM Headlight or with our more powerful 5.75'' LED conversion kit which includes our OG 5.75'' Headlight Bucket with OEM style connector (plug & play) & your choice of our OG 5.75'' LED Headlight styles. 

*If available on our website it means we have the kit in stock. All Fairing kits are made & assembled by the order. Please allow a maximum of 5 days processing time for any fairing kits in stock purchases.

**We now offer FXRLS color-matched fairings in most OEM colors. We only use H-D OEM paint for that premium finish. If it's available it means we have it in stock too! If we don't, please allow 3-4 extra weeks for the paint process.

***OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models.

Features

• ABS Injection Molded Shell


• Gunship Gray Color matched fairings with black headlight bezel


• 12 & 15 inch recurved windshields available in multiple colors


• Pre-installed Back Brackets black painted


• Stainless steel hardware included


• CNC Machined complete Headlight Conversion bracket kit included


• Optional anti-buffeting kit included


• 
  Fully adjustable Billet windshield arms included
  

Fitment

• Fits all 2020 to present Softail FXLRS


• Fits all 2019 to present Softail FLSB 


• 
  OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models
  
  

*If your motorcycle is equipped with an OG Top triple tree, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees in order to run your T-Sport Fairing with the OG Top Triple Tree.

**When using an OG projector or X Series headlight on 2018+ Softail models, error code B216615 – Running Lamp Circuit Open may appear. This does not affect the performance or proper functioning of the headlight.

Installation

Click here for installation instructions

Our OG T-Sport Fairing Kit for the Harley-Davidson Softail Low Rider S FXLRS allows you to run our reproductions of the classic FXDXT fairings. Made to be bolted to the stock lower tree this kit includes everything you need to improve wind deflection on your ride without breaking your bank!

Now available for FXLRS OEM Headlight or with our more powerful 5.75'' LED conversion kit which includes our OG 5.75'' Headlight Bucket with OEM style connector (plug & play) & your choice of our OG 5.75'' LED Headlight styles. 

*If available on our website it means we have the kit in stock. All Fairing kits are made & assembled by the order. Please allow a maximum of 5 days processing time for any fairing kits in stock purchases.

**We now offer FXRLS color-matched fairings in most OEM colors. We only use H-D OEM paint for that premium finish. If it's available it means we have it in stock too! If we don't, please allow 3-4 extra weeks for the paint process.

***OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models.

Features

• ABS Injection Molded Shell


• Barracuda Silver matched fairings with black headlight bezel


• 12 & 15 inch recurved windshields available in multiple colors


• Pre-installed Back Brackets black painted


• Stainless steel hardware included


• CNC Machined complete Headlight Conversion bracket kit included


• Optional anti-buffeting kit included


• 
  Fully adjustable Billet windshield arms included
  

Fitment

• Fits all 2020 to present Softail FXLRS


• Fits all 2019 to present Softail FLSB 


• 
  OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models
  
  

*If your motorcycle is equipped with an OG Top triple tree, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees in order to run your T-Sport Fairing with the OG Top Triple Tree.

**When using an OG projector or X Series headlight on 2018+ Softail models, error code B216615 – Running Lamp Circuit Open may appear. This does not affect the performance or proper functioning of the headlight.

Installation

Click here for installation instructions

Our OG T-Sport Fairing Kit for the Harley-Davidson Softail Low Rider S FXLRS allows you to run our reproductions of the classic FXDXT fairings. Made to be bolted to the stock lower tree this kit includes everything you need to improve wind deflection on your ride without breaking your bank!

Now available for FXLRS OEM Headlight or with our more powerful 5.75'' LED conversion kit which includes our OG 5.75'' Headlight Bucket with OEM style connector (plug & play) & your choice of our OG 5.75'' LED Headlight styles. 

*If available on our website it means we have the kit in stock. All Fairing kits are made & assembled by the order. Please allow a maximum of 5 days processing time for any fairing kits in stock purchases.

**We now offer FXRLS color-matched fairings in most OEM colors. We only use H-D OEM paint for that premium finish. If it's available it means we have it in stock too! If we don't, please allow 3-4 extra weeks for the paint process.

***OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models.

Features

• ABS Injection Molded Shell


• Midnight Crimson matched fairings with black headlight bezel


• 12 & 15 inch recurved windshields available in multiple colors


• Pre-installed Back Brackets black painted


• Stainless steel hardware included


• CNC Machined complete Headlight Conversion bracket kit included


• Optional anti-buffeting kit included


• 
  Fully adjustable Billet windshield arms included
  

Fitment

• Fits all 2020 to present Softail FXLRS


• Fits all 2019 to present Softail FLSB 


• 
  OEM Headlight kit only fits Low Rider S FXLRS models. Will not fit Sport Glide FLSB models
  
  

*If your motorcycle is equipped with an OG Top triple tree, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees in order to run your T-Sport Fairing with the OG Top Triple Tree.

**When using an OG projector or X Series headlight on 2018+ Softail models, error code B216615 – Running Lamp Circuit Open may appear. This does not affect the performance or proper functioning of the headlight.

Installation

Click here for installation instructions

Introducing our 2'' Straight Shorty Risers. Perfect for Racing applications, or just a shorty option for the street. Fits with our OG Riser Extensions to fine tune your total rise. These are the exact same risers we use on our Racing Bagger! 

* Works with any standard 1 1/8" handlebar (most MX Style bars). Use our shims set to run your favorite 1" handlebar.

** Our Digital Gauge Clamp will fit with the new KOSO D2 Gauge for all models including baggers. OEM Gasket #70900822 is required for that application.

*** We strongly recommend polyurethane bushings for risers lower than 9” and solid bushings for risers higher than 9”.

Features

• Works with any standard 1 1/8" handlebar (most MX Style bars)


• Use our shims set to run your favorite 1" handlebar


• CNC Machined 6061 T6 Aluminum


• Hard Anodized finish


• Machined OG logo
  


• Base hole tapped for OEM mounting bolts


• Fits on all models with 3.5" center on center riser spacing (most H-Ds models)


• Sold in pairs with top clamp & inner grooves small covers


• Stainless steel hardware included


• Available with M8 Softails integrated Digital Gauge Clamp
  


• Top Clamp pre-drilled for various accessories mounting including all our Instruments and Gauges Bezels 
  


• Our Digital Gauge Clamp will fit with the new KOSO D2 Gauge for all models including baggers.

Installation

Click here for installation instructions

Our OG Risers Indicator Light Mount allows you to relocate & mount your OEM Indicator Lamp on our Risers using the internal wiring rails to attach. Can be combined with our Single or Dual Accessories mount for multiple accessories setup (2+).

*For use with OG Risers only.

Features

• CNC Machined 6061 T6 Aluminium


• Will work with any of our risers (Pull Back & Straight)


• Replaces your stock H-D Sportster & Dyna top clamp with the built-in "speedometer ring" mount


• Fits with 67184-94 Indicator Lamp Sockets


• Stainless steel hardware included


• Hard Anodized finish

Fitment

• Will work on 95-Up Sportster models and some Dyna models equipped with 67184-94 Indicator Lamp Sockets. Will fit some models by changing the bezel, lens and light bulb housing.


• Fits with all models that have 67184-94 Indicator Lamp Sockets.


• For 1995-2007 Sportster Customs and some Dyna models, installation may require separate purchase of the following OEM bezel, lens, and light bulb housing:
  
  
  
  • HD part number 68513-95
  
  
  • HD part number 68551-95
  
  
  • HD part number 68516-95
  
  
  
  


• For 2008-Up Sportster Customs and some Dyna models, installation may require separate purchase of the following OEM bezel, lens, and wiring harness:
  
  
  
  • HD part number 68813-07
  
  
  • HD part number 68513-95
  
  
  • HD part number 68551-07
  
  
  
  

Gripper version of our popular OG Shifter Peg. Features matching V3 Gripper area for added grips & control. Machined from solid aluminum.

Features

• 2'' Long


• 6061 T6 Aluminum


• Hard Anodized & Chrome finishes


• Laser engraved OG logo
  


• Fit most 1984-Current Harley-Davidson models


• Stainless steel hardware included

*For 2023 & up Nightster models, the supplied hardware will not work; you will need the following hardware: SHCS M6x1.0x60mm 

**If equipped with Brake arm HD P/N 41600348, use our selection of OG Indian Shifter/Brake Peg

Gripper version of our popular OG Shorty Shifter Peg. Features matching V3 Gripper area for added grips & control. Machined from solid aluminum.

Features

• 1.35'' Long


• 6061 T6 Aluminum


• Hard Anodized & Chrome finishes


• Laser engraved OG logo
  


• Fit most 1984-Current Harley-Davidson models


• Stainless steel hardware included

*For 2023 & up Nightster models, the supplied hardware will not work; you will need the following hardware: SHCS M6x1x40mm

**If equipped with Brake arm HD P/N 41600348, use our selection of OG Indian Shifter/Brake Peg

Gripper version of our popular OG Shorty Shifter Peg. Features matching V3 Gripper area for added grips & control. Machined from solid aluminum.

Features

• 1.35'' Long


• 6061 T6 Aluminum


• Hard Anodized & Chrome finishes


• Laser engraved OG logo
  


• Fit most Indian models


• Stainless steel hardware included

Gripper version of our popular OG Shifter Peg. Features matching V3 Gripper area for added grips & control. Machined from solid aluminum.

Features

• 2'' Long


• 6061 T6 Aluminum


• Hard Anodized & Chrome finishes


• Laser engraved OG logo
  


• Fit most Indian models


• Stainless steel hardware included

*Already included with all our Foot Pegs products*

These are available for purchase for customers who are swapping pegs to a different bike.

• Compatible with our newer taper-style pegs mount. 


• 
  Fits 2017+ Indian passenger pegs
  
  


• 
  Fits 2015-2021 Indian Scout models & 2022+ Indian Chief


• New bolts included
  
  


• Sold in pairs

Contact us if you have any questions about fitment.

*Already included with all our Foot Pegs products*

These are available for purchase for customers who are swapping pegs to a different bike.

• Compatible with our newer taper-style pegs mount. 


• 
  Fits 2015-2021 Indian Scout models & 2022+ Indian Chief


• New bolts included
  
  


• Sold in pairs

Contact us if you have any questions about fitment.

Complete your front cartridges installation with styles using our High Quality Fork Tubes. Available in Gold TIN coating or Black DLC coating. Available in factory length & +2” extended length for the aggressive riders looking to increase ground clearances. 

Features

• 
  Available in Gold TIN coating or Black DLC coating
  


• Available in factory length & +2” extended length


• Works with stock suspensions internals and most aftermarket kits

Fitment

• 
  Fits all 2018 to present M8 Softail models with 49mm front end; Street Bob FXBB, Low Rider FXLR, Standard FXST & Breakout FXBR
  


• Does not fit Softail Fat Boy FLFB