All

Give It Hell Customs Tool Box

This vintage steel toolbox has seen its share of slugging tools from one place to the next. It used to just be someone's "good ol' toolbox" until Jennie Coulson, of Give It Hell Customs, got her hands on it and gave it new life. It still has a lot to give but now it has some rad original art! Jennie Hand painted a snake in a way only she can. This one-off toolbox is ready to be on display in someone's garage, man-cave, or she-shed. Your new favorite stashbox is here!

Velocity Stacks for EFI Honda Shadows - VT750

The velocity stack for the EFI Honda Shadows is finally here!  Each stack comes with a surgical-grade stainless steel filtration element. Each stack is attached to the throttle body over a stainless steel filtration element with 3 included set screws.

These will fit the following EFI models

VT750 Phantom
VT750 RS
VT750 Spirit only with EFI
VT750 AERO only with EFI 

Includes: 

• One Single EFI Velocity Stack
• One Stainless Filtration Screen
• 3 Stainless #6-32 Set Screws
• Allen Key for Set Screws

In most cases, you can put a stack on your EFI-controlled bike and the computer will adjust to the new changes within a ride, making this intake an easy plug n play part.  However to get the most out of your intake upgrade and to really see a step up in performance then you may want to look into an aftermarket EFI controller. 

You will need to remove your stock air box to install this velocity stack and either plug your PAIR valves or use a set of TJBC PAIR block-off plates to block them off. 

Stainless Carb Bolt Kit Honda Shadow VT600 87-08 and VT750 98-08

These Stainless Carb Bolt Kits for your Carbureted Honda Shadow are the answer to the rusty stock bolts that strip out and get seized! The stock bolts on these carbs are Phillips head, and after repeated use from jetting or modifications, they can strip out pretty easily. 

The Stainless Carb Bolt Kit - For Single Carb kit now includes the AFP plug. Dual carb bikes do not need the AFP plug.  

This is a stainless steel allen head bolt replacement kit for a single or dual carburetor honda shadow. These are not for EFI models. 

10mm Crush Washers

• Washers designed to work with Goodridge universal brake lines
• crush washers should be replaced every time you remove your banjo bolt

Roadtech Teardrop Tool KitFar Harley

• Kit is for Harley-Davidson® except V-Rod
• Comprehensive tool kit designed to fit into teardrop-style tool boxes, but applicable to air-cooled models
• Includes 3/8", 7/16", 1/2", 9/16" and 10 mm wrenches, mini ratchet and 2" extension, 3/8" x 7/16", 1/2" and 10 mm sockets, 1/8", 5/32", 3/16", 1/4" and 5/16" hex wrenches, T25, T27 and T40 star wrenches, 6-in-1 screwdriver, 5/8" (16 mm) spark plug socket, 8" adjustable wrench, locking pliers, spark plug gap gauge, electrical tape, cable ties (5-pk.), mechanic's wire and a tire pressure gauge

FXST and FLST Knurled Seat Bolt Kit - Chrome

• Includes two chrome 1/2"-13 x 5/8" knurled head finger bolts with O-rings

Holey Shifter Pegs & Brake Pegs - Honda Shadow

Made with the Honda Shadow in mind but will fit many other motorcycles!

Specs:

• 2.25" long
• 7/8" Diameter
• Includes mounting bolt 
• Pegs are sold individually. For a set of pegs, purchase a quantity of two when you checkout. 

To install on a Honda Shadow, you will need to cut off the existing shifter or brake peg and drill a 8mm hole in the shifter arm. Then use the included bolt to bolt the peg on. Make sure you use Loc-tite on the bolt threads!

With a drill and a hacksaw this whole process takes about 10 minutes tops. A cutoff wheel in an angle grinder makes the whole process a lot faster. Don't chop off your fingers!

Aluminum pegs are crafted from 6061A aircraft grade Aluminum and the black pegs are Anodized. 

Brass pegs are crafted from C 36000 machinable Brass

Some models may require more fabrication to fit. 

Sold Each. Not in pairs.

This is for the purchase of a peg only. The video is for example purposes and shows other pieces which are not included

1973 Ironhead

• Righthand shift
• Kickstart only
• Purple
• $5500

Contact Patrick at 416-831-1005

1972 Ironhead

• Righthand shift
• Kickstart only
• Black
• $5500

Contact Patrick at 416-831-1005

5/16" Counterbore Bungs

These bungs are sold as a pair and can be purchased as mild or stainless steel and allow for the head of an allen bolt to sit flush inside. 

Outside measurements are as follows:

• 3/4" diameter
• .625" long

Push Button Off-(On) Starter Switches

These high-quality momentary push buttons can be used for all sorts of things, but a popular choice is to use these to move your start button off of your handlebars. The screw terminals make these an easy install. They do require a 0.750" hole to install. 

Stainless Case Bolt Kit for VT600 and VT750

They've elected me to talk to you. It's about the rusted bolts in your motor. . .  It's time to let go before they do.

Fits: 

• VT600 /VLX 600 1988 - 2007
• VT750 98 and up models with the cast metal cases only. If you have a plastic cover on your case these will not fit. 

You can remove each bolt one at a time and replace it with the correlating bolts in the kit. 

Torque all bolts to 9 lbf.ft

Exhaust Baffles for 1.75" Exhaust

These baffles are easily installed on any straight tip exhaust pipes. They are approximately 4" long. Each baffle is sold individually.

These baffles fit the straight cut versions of our exhaust models : 

• Backdraft Exhaust - Honda Shadow VT600 VLX600 88-07
• Backdraft Exhaust - Honda VT750 - 2004 & Up Aero Phantom Spirit
• Backdraft Exhaust - Honda VT750 Spirit, ACE, Aero, RS
• Magnus V Upsweep Exhaust - Honda Shadow VT600 VLX600

These baffles install in only minutes using the included hardware. To install measure how far in you want the baffle to be, and drill a small hole to bolt the baffle in. EASY!

Rebuild Kit for Clutch and Brake Master Cylinder 14mm (9/16") Bore

Rebuild kit for brake master cylinder 14mm (9/16”) bore