TC Bros Horseshoe Oil Tank For 1982-2003 Sportster Hardtail Kit
Regular price
$650.00
Horseshoe Oil Tank For 1982-2003 Sportster Hardtail Kit
TC Bros. Horseshoe Oil Tank is beautifully constructed from 14ga steel. It is 100% TIG welded and pressure tested in the USA by skilled craftsmen. 3-quart capacity provides an ample supply of oil for your motorcycle.
Included mounting kit works in conjunction with TC Bros. seat mounting kits #106-0079 or #106-0080 allowing for easy installation and seat hardware access. If using with a different seat (sprung solo, etc.) additional mounting tabs/hardware may be required.
Accepts stock Harley Sportster oil tank filler caps
Moose Racing 1/8" Carb Hose
Regular price
$27.95
1/8" Carb Hose
This quality-made fuel line will not harden or crack
Made in the U.S.A.
Not to be used with fuel over 10% alcohol.
Clear
1/8" ID
5' length
Give It Hell Customs Tool Box
Regular price
$220.00
Give It Hell Customs Tool Box
This vintage steel toolbox has seen its share of slugging tools from one place to the next. It used to just be someone's "good ol' toolbox" until Jennie Coulson, of Give It Hell Customs, got her hands on it and gave it new life. It still has a lot to give but now it has some rad original art! Jennie Hand painted a snake in a way only she can. This one-off toolbox is ready to be on display in someone's garage, man-cave, or she-shed. Your new favorite stashbox is here!
The velocity stack for the EFI Honda Shadows is finally here! Each stack comes with a surgical-grade stainless steel filtration element. Each stack is attached to the throttle body over a stainless steel filtration element with 3 included set screws.
These will fit the following EFI models
VT750 Phantom VT750 RS VT750 Spirit only with EFI VT750 AERO only with EFI
Includes:
One Single EFI Velocity Stack
One Stainless Filtration Screen
3 Stainless #6-32 Set Screws
Allen Key for Set Screws
In most cases, you can put a stack on your EFI-controlled bike and the computer will adjust to the new changes within a ride, making this intake an easy plug n play part. However to get the most out of your intake upgrade and to really see a step up in performance then you may want to look into an aftermarket EFI controller.
You will need to remove your stock air box to install this velocity stack and either plug your PAIR valves or use a set of TJBC PAIR block-off plates to block them off.
These Stainless Carb Bolt Kits for your Carbureted Honda Shadow are the answer to the rusty stock bolts that strip out and get seized! The stock bolts on these carbs are Phillips head, and after repeated use from jetting or modifications, they can strip out pretty easily.
The Stainless Carb Bolt Kit - For Single Carb kit now includes the AFP plug. Dual carb bikes do not need the AFP plug.
This is a stainless steel allen head bolt replacement kit for a single or dual carburetor honda shadow. These are not for EFI models.
Goodridge 10mm Crush Washers
Regular price
$6.95
10mm Crush Washers
Washers designed to work with Goodridge universal brake lines
crush washers should be replaced every time you remove your banjo bolt
Ram Tough Claw Mount With Level Cup Drink Holder
Regular price
$69.95
Tough Claw Mount With Level Cup Drink Holder
High-strength composite and stainless steel mount with drink holder designed with two pivot points to keep your drink upright, regardless of conditions
Kit includes small Tough-Claw™ base and RAM Level Cup™ Self-Leveling Drink Holder; Tough-Claw allows for tool-less removal and adjustments on any rail/tube or flat surface
Mount rotates 360°
Integrated eyelet and hook provide an optional tethering function to help secure any small or open container
Clamping range on rail/tube surfaces is 0.625" to 1.5"; clamping range on flat surface is 0" to 1.14"
Fits cans, cups, mugs, etc. ranging from 2.5" to 3.5" diameter
Includes two chrome 1/2"-13 x 5/8" knurled head finger bolts with O-rings
TC Bros 3/8-16 Threaded 1" Long Steel Bung
Regular price
$52.00
3/8-16 Threaded 1" Long Steel Bung
Steel Bungs 3/8-16 Threaded 1 inch Long by TC Bros Save time and create a super strong mount for just about anything on your bike using these fully threaded bungs. Proudly made in the USA from premium American 1018 cold rolled steel for easy welding. These are a perfect match to our 3/8" counterbore style bungs for socket head bolts. These bungs are 3/4" diameter x 1" long and are tapped through with 3/8-16 threads. See photos for all dimensions. Sold in packs of 4.
Made with the Honda Shadow in mind but will fit many other motorcycles!
Specs:
2.25" long
7/8" Diameter
Includes mounting bolt
Pegs are sold individually. For a set of pegs, purchase a quantity of two when you checkout.
To install on a Honda Shadow, you will need to cut off the existing shifter or brake peg and drill a 8mm hole in the shifter arm. Then use the included bolt to bolt the peg on. Make sure you use Loc-tite on the bolt threads!
With a drill and a hacksaw this whole process takes about 10 minutes tops. A cutoff wheel in an angle grinder makes the whole process a lot faster. Don't chop off your fingers!
Aluminum pegs are crafted from 6061A aircraft grade Aluminum and the black pegs are Anodized.
Brass pegs are crafted from C 36000 machinable Brass
Some models may require more fabrication to fit.
Sold Each. Not in pairs.
This is for the purchase of a peg only. The video is for example purposes and shows other pieces which are not included
The TJ BRUTAL CUSTOMS Fork Extensions for Honda Shadow VT750DC Spirit 2001-2007 & VT750RS RS 2010-2014motorcycle forks are here! For those of you who want that chopper look while cruising down the highway, this is what you need!
These fork extensions add 6" to your forks and are machined from stainless steel, so they can be polished to a chrome-like finish to match your forks if you choose.
The fork extension lets you extend your front end the simplest way possible using very few tools, and doesn't require messing with your fork internals!
Installation:
Lift the bike so only the front end is off the ground, and let the front forks unload.
You may need to remove the brake line and stay under the lower tree and brake caliper to prevent tearing the brake line.
If you have a speedometer, you may want to disconnect it from the hub as well.
Loosen the fork pinch bolts on the top and bottom trees.
Slide the forks down through the top tree, but not all the way out of the bottom tree.
Remove the stock fork caps carefully, they are under a little bit of spring pressure.
Remove the O-rings from your stock fork caps and install them on the threaded end of the fork extensions.
Using a little bit of fork oil, wipe a thin film on the threads of the fork extension.
Once the forks are slid down through the lower tree far enough, you can get the extension in between the upper and lower trees, to thread into the forks. EDIT: we have found it is important to have the lower tree clamp loose, otherwise you will have trouble threading the extensions in.
Thread them carefully as the threads are fine and cross-threading will be a very expensive mistake. It often helps to rotate the extension counterclockwise slowly to feel where the threads begin. (somatosensory precision!)
once the fork extensions have been threaded in, you can use a #2 phillips screwdriver in the 1/4 " hole at the top of the fork extensions to snug them down.
Repeat for both sides of the forks.
Slide the extensions up into the top tree,
Tighten all pinch bolts. - Top pinch bolts to 8ft-lb, Lower pinch bolts to 36ft-lb
Ride fast, take chances easy rider!
****These are intended for choppers. which typically aren't running tomfoolery such as speedometers and brakes. however if you want to run a front brake or a speedometer you will need to get longer lines if you want to run these extensions.
1973 Harley-Davidson Ironhead FOR SALE
Regular price
$5,000.00
1973 Ironhead
Righthand shift
Kickstart only
Purple
$5500
Contact Patrick at 416-831-1005
1972 Harley-Davidson Ironhead FOR SALE
Regular price
$5,000.00
1972 Ironhead
Righthand shift
Kickstart only
Black
$5500
Contact Patrick at 416-831-1005
Prism Supply Co 5/16" Counterbore Bungs
Regular price
$27.00
5/16" Counterbore Bungs
These bungs are sold as a pair and can be purchased as mild or stainless steel and allow for the head of an allen bolt to sit flush inside.
