Name: Kustom Tech Clutch Lever Assembly - Black
Brand: Kustom Tech
Price: 240.0 CAD
Availability: InStock

Motogadget mo.unit blue

$549.95

mo.unit blue

The new m.unit blue has moved on from the established previous version by undergoing significant development and improvements. It is now equipped with 12 inputs and 10 outputs, replaceable high-quality cable clamps and, most notably, Bluetooth® LE. This enables the m.unit blue to be connected to our ‘m.ride’ smartphone App. This feature is unique for motorbike accessories.

The m.ride App manages the entire setup and alarm system. Fault diagnostics can also be performed during operation and without having to remove the m.unit. The secure, encrypted Keyless Go function can also be used.

When this function is activated and you approach your motorbike with your smartphone, the on-board electrical system is activated and the motorbike is ready to be started.

The m.unit blue is the digital control unit for your motorbike – the heart of the entire on-board electrical system. It can be operated using buttons or using conventional handlebar switches. It controls all necessary components on the vehicle while also performing fuse functions.

There are considerably fewer relays and individual components in the wiring harness and the vehicle can be rewired with less effort in a very short amount of time.

When using the m.button, all switch connections are reduced to one single cable.

Features WITHOUT smartphone and m.ride App

Complete digital control using buttons possible with 4 or 5-button operation.
Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off if there are faults. After the fault is rectified, the safety function is automatically reset.
Integrated alarm system that can be installed in any position.
Integrated, digital flasher relay that is load-independent; automatic switch-off optional and can be set; m.wave mode can be selected.
Integrated hazard warning light.
Turn signal can optionally be set as a positioning light.
Integrated parking light and headlight flashing.
Lo-beam and Hi-beam (up to 200 W switched capacity) can be controlled using only one button.
Integrated, digital brake light modulator; flashing mode can be programmed.
Acceleration-controlled emergency brake light (automatic warning signal).
Integrated starter relay for the starter system with solenoid (up to 30 A switched capacity).
Intelligent and configurable management/switch-off of power consuming devices so that the maximum starting energy from the battery can be used when starting the motorbike.
Integrated, digital horn relay.
Two configurable additional outputs AUX1 and AUX2.
Diagnostics function for assigning inputs, outputs, the circuit switching status, short circuit diagnostics etc.
Calibration and current measurement enables faults to be detected on all lamps.

Features WITH smartphone and m.ride App

Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and m.unit blue energy usage.
Keyless Go (the on-board electrical system is switched on when you approach the motorbike with your smartphone).
Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor etc.).
Alarm system mode and sensitivity can be adjusted.
The on board voltage can be monitored in the App.
Diagnostics on all inputs and outputs; current, voltage and device temperature measurement.
Real-time audio fault messages issued via the helmet headset.
Outputs can be switched manually via smartphone (except for starter).
Firmware updates provided anywhere via smartphone and App without removal.
Setup menu can be configured anywhere via smartphone and App without removal.
Speedometer input for comparing the vehicle mileage with m.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs etc.
Logbook for recording journeys and displaying the vehicle status, alarm events and maintenance tasks.
Parking position display and Ping! for help locating the vehicle.
LIN bus connection for connecting to compatible motogadget products at a later date.

Technical requirements

The m.ride App is available for Android devices of the list below. The version for iOS is available from iPhone 5 and later.

Bluetooth 4.0 require the latest generation of smartphones. We guarantee full functionality with recent software updates on explicit all following Android devices ONLY:

Samsung Galaxy S8/S8+

Samsung Galaxy S7/S7 Edge

Samsung Galaxy S6/S6 Edge

Samsung Galaxy S5/S5 Neo

Samsung Galaxy Note 4

Samsung Galaxy Tab S2 10.5

Samsung Galaxy Tab A (2016)

Samsung Galaxy Note 5

Google Pixel/ Pixel XL

Google Nexus 5

Google Nexus 5X

LG G4

LG G5

Sony Experia Z3 Compact

OnePlus 3/OnePlus 3T

Huawei P9/ P9 Plus

Further information on the App can be found at mride.de or in Google Playand iTunes.

Scope of delivery

m.unit blue
1 x M5 stainless steel bolt
2 x M5 stainless steel bolts with nut
1 x speed sensor with 2 magnets
Detailed installation and operating instructions

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Specifications and features

L/W/H	90 x 53 x 30 mm, bolt distance 74 mm
Weight	Approx. 180 g
Fastener	2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery Plus
Operating voltage	6 V - 20 V
Operating temperature	-20°... +80°C
Inputs	1 x input (+12 V switched) for ignition lock or m.lock 11 x control input (minus/switched to ground) for: Left turn signal Right turn signal Lo/Hi-beam Starter Horn Brakelight Kill switch Stand switch LIN bus AUX1 AUX2
Outputs	10 x Outputs (+12V) for: Left turn signal Right turn signal Lo-beam Hi-beam Starter Horn Brakelight Ignition AUX1 AUX2

Moto Iron - Springer Front End Harley Davidson

Moto Iron - Springer Front End Harley Davidson

$740.95

Springer Front End Black fits Harley Davidson

Black Harley Springer Front End

Moto Iron has been successful in producing a high quality springer front end that is affordable to all bike builders. With its heavy duty, one piece forged rear legs and beefy 1" diameter front legs, these springers offer a high strength level of quality at a price that cannot be beaten. When viewing next to leading competitors, the differences were easy for us to see why they are the better choice. These Springers will fit most Harley Davidson Big Twins from 1949-Present and 1982-2003 Sportsters with 1" neck bearings. Not for use on Dyna Models.

Unique Features:

Heavy duty, one piece forged rear legs.
1" diameter front legs for improved durability.
Precision fit bronze rocker bushings for long life.
TIG welded construction.
Includes 3/4" axle and spacers for 1984-1999 Harley Wide Glide Wheels
Zinc plated axle and steering stem to prevent corrosion.
Triple chrome plated or black powdercoated finishes.

Fitment Notes:

These are designed to fit most Harley Davidson Big Twins from 1949-Present and 1982-2003 Sportsters with 1" neck bearings and 3/4" Axle.
They include a 1" diameter steering stem, 3/4" diameter axle, and wheel spacers.
The included wheel spacers are designed to fit Harley Wide Glide Wheels from 1984 - 1999. They work with a 11.5" Harley Brake Rotor (84-99), and Springer type brake calipers.
To install on 1952-1981 Sportsters, a 7/8" - 1" neck cup conversion kit will be needed.
You can run other wheels (Narrow Glide, etc...) but you will need to cut your own wheel spacers in order to do so.
The top tree accepts 1/2"-20 fine thread risers and the riser spacing is 4.75" center to center (same as OEM Harley Springers) keep that in mind when purchasing handlebars.
If you want to run Harley OEM style handlebars with 3.5" riser spacing you will need to purchase a riser adaptor kit

These will not fit the following bikes:

2004 & newer Harley Sportsters because of turning radius and fork lock interference
Dyna wide glide or narrow glide.
Yamaha XS650, unless you purchase a conversion kit
Vintage Triumph Models unless you purchase a conversion kit

Almost Oldschool Chimp Bars

$240.00

The Chimps

Locally made in South-Western Ontario. Almost Oldschool handlebars are all handmade from high-quality stainless steel. Polish them to a chrome-like finish or leave them raw. Also available in black powder coat by request.

1"
3.5” clamping space
9.75” pullback
12” rise
28.5” total width

Vans X Cult Motorcycle Grips - Black

$31.95

Vans Motorcycle Grips - Black

What's more classic than a pair of Vans? Now you can have that incredible grip on your handlebars!

Features the classic Vans waffle sole pattern with a subtle domed centre section for improved ergonomics and vibration dampening
125mm in length
Sold in Pairs
Throttle tube NOT included
Available in 1" or 7/8"

Go Fast Innovations JIS Screwdriver Set

$45.99

JIS Screw Driver Set

If your riding a metric motorcycle then this screwdriver set is a must-have. Stop stripping the screws on your motorcycle. They might look like Phillips heads but they're not!

Add a socket or wrench to the back of this screwdriver and get a little extra leverage for those difficult screws. You can also confidently hit the back of these drivers with a hammer confidently! They have a lifetime warranty!

Each set contains the following:

1-JIS style screwdriver-size #1 with a 75mm shaft, perfect for those little screws on handlebar switches, electrics, etc
1-JIS style screwdriver-size #2 with a 100mm shaft, our most versatile, great for all carb screws, etc
1-JIS style screwdriver-size #3 with a 150mm shaft, fits all those larger screws found on the engine cases and bodywork.
When you receive your Go fast Innovations JIS screwdriver set and open the box, you will find the best set and maybe the last set of screwdrivers you will ever buy. That’s because JIS screwdrivers fit most Phillips screws too.