Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT
Prism Supply Co Petcock 3/8 NPT

Prism Supply Co Petcock 3/8 NPT

$129.00

Petcock 3/8 NPT

The Prism Supply Co petcocks are guaranteed for life! If you're having an issue with it you can send it back to them and they will rebuild it for no additional cost!

This unique petcock fits direct to either a 1/4" or 3/8" NPT bung on your gas tank. This keeps your gas tank looking very clean. It features a 5/16" diameter hose barb on one end and a fuel filter on the other. We recommend using our 1/4" fuel line for a snug, leak-proof fit. Rotating the cylindrical piece with the two grooves is how the fuel is toggled on and off. The fuel line does not rotate while toggling the fuel on/off. No reserve. 

Many custom and aftermarket gas tanks use a 1/4 inch NPT or 3/8 NPT petcock. NPT stands for National Pipe Thread and it is a tapered thread that seals as you tighten the petcock into the threaded fitting on your gas tank. Lowbrow Customs makes petcock adapter nuts in both brass and chrome that allow you to adapt your 22mm petcock bung to accept either a 1/4 inch NPT or 3/8 inch NPT petcock. 

You may also like

Sold Out
Motogadget mo.unit blue
$418.00
Sold Out
Antigravity - AG-401 Battery (4-Cell)
$142.00
Quick view
Antigravity Small Case 4-Cell Battery Tray
$70.00
Quick view
Go Fast Innovations JIS Screwdriver Set
$35.00
Motogadget mo.unit blue

Motogadget mo.unit blue

$418.00

mo.unit blue

The new m.unit blue has moved on from the established previous version by undergoing significant development and improvements. It is now equipped with 12 inputs and 10 outputs, replaceable high-quality cable clamps, and, most notably, Bluetooth® LE. This enables the m.unit blue to be connected to our ‘m.ride’ smartphone App. This feature is unique for motorbike accessories. 

The m.ride App manages the entire setup and alarm system. Fault diagnostics can also be performed during operation and without having to remove the m.unit. The secure, encrypted Keyless Go function can also be used. 

When this function is activated and you approach your motorbike with your smartphone, the onboard electrical system is activated and the motorbike is ready to be started. 

The m.unit blue is the digital control unit for your motorbike – the heart of the entire onboard electrical system. It can be operated using buttons or using conventional handlebar switches. It controls all necessary components of the vehicle while also performing fuse functions. 

There are considerably fewer relays and individual components in the wiring harness and the vehicle can be rewired with less effort in a very short amount of time. 

When using the m.button, all switch connections are reduced to one single cable.

Features WITHOUT smartphone and m.ride App

  • Complete digital control using buttons possible with 4 or 5-button operation.
  • Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off if there are faults. After the fault is rectified, the safety function is automatically reset.
  • An integrated alarm system that can be installed in any position.
  • Integrated, digital flasher relay that is load-independent; automatic switch-off optional and can be set; m.wave mode can be selected.
  • Integrated hazard warning light.
  • The turn signal can optionally be set as a positioning light.
  • Integrated parking light and headlight flashing.
  • Lo-beam and Hi-beam (up to 200 W switched capacity) can be controlled using only one button.
  • Integrated, digital brake light modulator; flashing mode can be programmed.
  • Acceleration-controlled emergency brake light (automatic warning signal).
  • Integrated starter relay for the starter system with solenoid (up to 30 A switched capacity).
  • Intelligent and configurable management/switch-off of power-consuming devices so that the maximum starting energy from the battery can be used when starting the motorbike.
  • Integrated, digital horn relay.
  • Two configurable additional outputs AUX1 and AUX2.
  • Diagnostics function for assigning inputs, outputs, the circuit switching status, short circuit diagnostics, etc.
  • Calibration and current measurement enable faults to be detected on all lamps.

Features WITH smartphone and m.ride App

  • Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and m.unit blue energy usage.
  • Keyless Go (the onboard electrical system is switched on when you approach the motorbike with your smartphone).
  • Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor, etc.).
  • Alarm system mode and sensitivity can be adjusted.
  • The onboard voltage can be monitored in the App.
  • Diagnostics on all inputs and outputs; current, voltage, and device temperature measurement.
  • Real-time audio fault messages are issued via the helmet headset.
  • Outputs can be switched manually via smartphone (except for starters).
  • Firmware updates are provided anywhere via smartphone and App without removal.
  • The setup menu can be configured anywhere via smartphone and App without removal.
  • Speedometer input for comparing the vehicle mileage with m.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs, etc.
  • Logbook for recording journeys and displaying the vehicle status, alarm events, and maintenance tasks.
  • Parking position display and Ping! for help locating the vehicle.
  • LIN bus connection for connecting to compatible motogadget products at a later date.

Technical requirements

The m.ride App is available for Android devices on the list below. The version for iOS is available for iPhone 5 and later. 

Bluetooth 4.0 require the latest generation of smartphones. We guarantee full functionality with recent software updates on explicit all following Android devices ONLY: 

  • Samsung Galaxy S8/S8+
  • Samsung Galaxy S7/S7 Edge
  • Samsung Galaxy S6/S6 Edge
  • Samsung Galaxy S5/S5 Neo
  • Samsung Galaxy Note 4
  • Samsung Galaxy Tab S2 10.5
  • Samsung Galaxy Tab A (2016)
  • Samsung Galaxy Note 5
  • Google Pixel/ Pixel XL
  • Google Nexus 5
  • Google Nexus 5X
  • LG G4
  • LG G5
  • Sony Experia Z3 Compact
  • OnePlus 3/OnePlus 3T
  • Huawei P9/ P9 Plus


    • Further information on the App can be found at mride.de or in Google Play and iTunes.

    Scope of delivery

    • m.unit blue
    • 1 x M5 stainless steel bolt
    • 2 x M5 stainless steel bolts with nut
    • 1 x speed sensor with 2 magnets
    • Detailed installation and operating instructions

    Specifications and features

    L/W/H 90 x 53 x 30 mm, bolt distance 74 mm
    Weight Approx. 180 g
    Fastener 2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery Plus
    Operating voltage 6 V - 20 V
    Operating temperature -20°... +80°C
    Inputs 1 x input (+12 V switched) for the ignition lock or m.lock 

    11 x control input (minus/switched to ground) for:
    Left turn signal
    Right turn signal
    Lo/Hi-beam
    Starter
    Horn
    Brake light
    Kill switch
    Stand switch
    LIN bus
    AUX1
    AUX2
    Outputs 10 x Outputs (+12V) for:
    Left turn signal
    Right turn signal
    Lo-beam
    Hi-beam
    Starter
    Horn
    Brake light
    Ignition
    AUX1
    AUX2
    four-cell-antigravity-lithium-battery

    Antigravity - AG-401 Battery (4-Cell)

    $142.00

    AG-401 Battery (4-Cell)

    Small Case Lithium Battery

    The AG-401 battery, at a minuscule 4.25″ Length x 1.25″ Depth and 3.75″ Height (to the top of the terminals), offers extreme power in the most compact size in Lithium Motorsport batteries. The AG-401 is best used for Performance applications where extreme weight loss and ultra-compact size are desired. Can start inline 4-Cylinder motors up to 600cc for race use, or up to 250cc for everyday street use in scooters. This battery is also a favorite of custom builders who want the smallest battery to tuck out of the way.

    Features

    • Adhesive-Backed Foam Included for EASY INSTALLATION.
    • Most Compact of Lithium Motorsports Batteries available.
    • Ultra-Lightweight and High-Power Lithium-Ion Motorsport Battery.
    • Can hold a charge for up to a year provided there are no “Parasitic Drains” (accessories that draw power when the bike is off (i.e. alarms, ECUs, iPods, GPS, heated grips, etc).
    • Built in the USA to high-quality standards.
    • Large all-brass terminal design.
    • Waterproof (Not intended for jetski use).
    • 3-Year Warranty 

    Best Uses

    • Capable of everyday use in bikes up to 250cc.
    • Race use for Enduro and MX electric start bikes up to 450cc. (If you have a 250cc 2-stroke you will need to use the Antigravity Battery AG-801)
    • Race and Track Day use in inline 4 cylinder 600cc sportbikes (Honda CBR600 rider should use the Antigravity Battery: AG-801).
    • Custom builds like cafe racers or small bore customs up to 350cc. (Please note if you use older classic bikes from the mid-1980s and earlier you should update the charging systems to a modern voltage regulator; a damaged voltage regulator can overcharge the battery and damage it.)

    The folks over at Prism Supply Co have come up with the perfect battery tray for the Antigravity 4 cell Battery. You can find it here!

    Antigravity Small Case 4-Cell Battery Tray
    Antigravity Small Case 4-Cell Battery Tray
    Antigravity Small Case 4-Cell Battery Tray
    Antigravity Small Case 4-Cell Battery Tray
    Antigravity Small Case 4-Cell Battery Tray
    Antigravity Small Case 4-Cell Battery Tray

    Antigravity Small Case 4-Cell Battery Tray

    $70.00

    Small Case 4-Cell Battery Tray

    This ultra-lightweight Antigravity Battery Tray (the BT-01 model) fits the Small Case AG-401 and SC-1 batteries.

    Custom-designed battery box for holding your Antigravity Battery. It’s perfect for Custom Bikes, Performance Cars, and other applications where you want to mount your Small Case Antigravity Battery. These offer a very cool look and are extremely lightweight with an all-Aluminum frame.

    • Quick and Easy installation.
    • Strong Welded, Unpolished Aluminum Battery Tray.
    • Fits 4-Cell “Small Case” Antigravity Batteries Found here
    Go Fast Innovations JIS Screwdriver Set
    Go Fast Innovations JIS Screwdriver Set
    Go Fast Innovations JIS Screwdriver Set
    Go Fast Innovations JIS Screwdriver Set

    Go Fast Innovations JIS Screwdriver Set

    $35.00

    JIS Screw Driver Set

    If your riding a metric motorcycle then this screwdriver set is a must-have. Stop stripping the screws on your motorcycle. They might look like Phillips heads but they're not!

    Add a socket or wrench to the back of this screwdriver and get a little extra leverage for those difficult screws. You can also confidently hit the back of these drivers with a hammer confidently! They have a lifetime warranty!

    Each set contains the following:

    • 1-JIS style screwdriver-size #1 with a 75mm shaft, perfect for those little screws on handlebar switches, electrics, etc
    • 1-JIS style screwdriver-size #2 with a 100mm shaft, our most versatile, great for all carb screws, etc
    • 1-JIS style screwdriver-size #3 with a 150mm shaft, fits all those larger screws found on the engine cases and bodywork.
    • When you receive your Go fast Innovations JIS screwdriver set and open the box, you will find the best set and maybe the last set of screwdrivers you will ever buy. That’s because JIS screwdrivers fit most Phillips screws too.
    v-Factor - Frisco Mount Sportster Style Tank
    v-Factor - Frisco Mount Sportster Style Tank
    v-Factor - Frisco Mount Sportster Style Tank
    v-Factor - Frisco Mount Sportster Style Tank
    v-Factor - Frisco Mount Sportster Style Tank
    v-Factor - Frisco Mount Sportster Style Tank

    v-Factor - Frisco Mount Sportster Style Tank

    $190.00

    Sportster Style Tank

    • Low tunnel tank
    • 2.4 Gallon
    • Mounts easily with front and rear tabs (custom mounting required)
    • Sold in two bung configurations. The first has a 3/8" NPT petcock bung on the left side and two 1/4" NPT petcock bungs at rear
    • The second configuration has a 3/8" NPT petcock bung on the left side but DOES NOT have the 1/4" NPT bungs
    • Uses 1982/later screw in vented gas cap (not included) 
    • We always suggest lining a new tank as cheap insurance. The Kreem Lining Kit works great!
    • This Universal Mounting Kit makes it easy to install
    Next: Vans X Cult Motorcycle Grips - Gum
    Back to Builder's Corner
    Next: Vans X Cult Motorcycle Grips - Gum