TJ Brutal Customs Tracker Exhaust Pipes
TJ Brutal Customs Tracker Exhaust Pipes
TJ Brutal Customs Tracker Exhaust Pipes
TJ Brutal Customs Tracker Exhaust Pipes

TJ Brutal Customs Tracker Exhaust Pipes

$484.95

Tracker Exhaust Pipes - Honda Shadow VT600 VLX 600

The Tracker exhaust pipes for your Honda Shadow VT600 VLX600 are a straight pipe set with a high position on the bike to radically change the look of your build to give it a more aggressive tracker style! 

Fits: 

  • Honda Shadow VT600 & VLX 1988 - 2007

Specs:

  • Made from 16ga steel
  • TIG welded to our DOM steel bosses
  • 3/8" thick steel collars
  • Includes new exhaust nuts and spacers for stock studs
  • Fits 1988 - 2007 Honda Shadow VT600, aka VLX 600**
  • Will not fit any other models
  • Does NOT include exhaust gaskets

You will need exhaust gaskets when installing new exhaust! You can find those here

Any time a change is made to your motorcycle exhaust or intake, a re-jet, aka tuning is necessary. The TJBC Performance Tuning Kit is meant to work with a free-flowing velocity stack and a free-flowing exhaust system. The TJBC Performance Tuning Kit is intended as a performance upgrade with velocity stacks and or/open exhaust and is not recommended for a stock intake setup or other aftermarket setups. 

NOTE: When installing your exhaust, the boss and collar will not sit flush with the exhaust port, there WILL be a gap. Do not over tighten the exhaust nuts as this can lead to undesirable results.

To clean chrome pipes use Windex and a clean microfiber cloth only on cold pipes. Do not use steel wool. Do not clean pipes until they are cold to the touch. Even pipes that have been in the sun can sometimes be too hot to clean. Do not use anything other than Windex to clean chrome pipes. Colour change is normal on all pipes even when plated as they are single-wall exhaust. 

**You may need to remove your side cover, passenger peg, and mount to accommodate these pipes.** 

FOR CLOSED COURSE USE ONLY. NOT FOR ON ROAD USE. Be a rebel.

You may also like

Quick view
TC Bros. - XS650 Builders Exhaust Kit
$250.00
Quick view
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson 3 Bolt STD Heads
$280.00
Quick view
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Panhead
$280.00
Quick view
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Shovelhead
$280.00
TC Bros. - XS650 Builders Exhaust Kit

TC Bros. - XS650 Builders Exhaust Kit

$250.00

XS650 - Builders Kit

TC Bros. Do it yourself exhaust kit for all years of the Yamaha XS650.

Kit Includes 2 flanges and collars to fit your stock XS650 head, 2 mandrel bent 90 degree pieces, 2 mandrel bent 180 degree pieces and 2 straight length pieces.

Tubing is 1.5 inch diameter 16 gauge mild steel and is bent on a 3" Centerline Radius. Flanges are 1/4 inch thick. Plenty of material is included to make just about any custom exhaust that you think of!

Made in the USA.

TC Bros - DIY Builder Exhaust Kit fits Harley Davidson 3 Bolt STD Heads

TC Bros - DIY Builder Exhaust Kit fits Harley Davidson 3 Bolt STD Heads

$280.00

 DIY Builder Exhaust Kit fits Harley Davidson 3 Bolt STD Heads

do it yourself builder’s exhaust kit fits all Harley Davidson Panhead and Shovelhead engines utilizing the 3-bolt STD exhaust flange heads. This kit comes with everything you need to cut and weld a set of custom pipes for your bike and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper heavy duty, TIG welded, ¼" thick flange set to fit your STD head bike with a leak free seal.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Panhead
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Panhead
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Panhead
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Panhead

TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Panhead

$280.00

DIY Builder Exhaust Kit fits Harley Davidson Panhead

do it yourself builder’s exhaust kit fits all Harley Davidson Panhead engines with heads that utilize clamp on exhaust headers. This kit comes with everything you need to cut and weld a set of custom pipes for your Pan and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper flange set to fit your bike.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Shovelhead
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Shovelhead
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Shovelhead
TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Shovelhead

TC Bros - DIY Builder Exhaust Kit fits Harley Davidson Shovelhead

$280.00

DIY Builder Exhaust Kit fits Harley Davidson Shovelhead

do it yourself builder’s exhaust kit fits all Harley Davidson Shovelhead engines utilizing single-bolt exhaust flange heads. This kit comes with everything you need to cut and weld a set of custom pipes for your Shovel powered bike and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper heavy duty, TIG welded, ¼" thick flange set to fit your bike with a leak free seal.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

TC Bros - DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo
TC Bros - DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo
TC Bros - DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo
TC Bros - DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo
TC Bros - DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo
TC Bros - DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo

TC Bros - DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo

$280.00

DIY Builder Exhaust Kit fits Harley Sportster & Big Twin Evo

do it yourself builder’s exhaust kit fits all Harley Davidson Evolution engines including all Sportster and Big Twin Models produced from 1984-Present (including Twin Cam). This kit comes with everything you need to cut and weld a set of custom pipes for your Evo powered bike and is made right here in the USA.

All tubing is 1.75" OD x 16ga Wall (.065" Thick) American Made mild steel for superior weldability. All bends are 3.5" centerline radius and are produced using a CNC mandrel bender for accuracy and maximum exhaust flow. Kit includes qty 2 90 degree bends, 2 180 degree bends, 3 straight tubing pieces, 2 U-channel mounts, and the proper heavy duty flange set to fit your bike with a leak free seal.

This DIY kit is the perfect way to build the unique looking set of pipes you desire.

Next: Chrome Exhaust P Clamp 1 1/2"
Back to Exhaust
Next: Chrome Exhaust P Clamp 1 1/2"