TJ Brutal Pressio Bolt On Fender Mount for Curved Fender
TJ Brutal Pressio Bolt On Fender Mount for Curved Fender
TJ Brutal Pressio Bolt On Fender Mount for Curved Fender
TJ Brutal Pressio Bolt On Fender Mount for Curved Fender

TJ Brutal Pressio Bolt On Fender Mount for Curved Fender

$105.00

Pressio Bolt On Fender Mount for Curved Fender - Honda Shadow VT600 VLX

The Pressio Bolt-On Fender Mount for our Curved Fenders the Honda Shadow VT600 VLX is the hassle-free answer for those who don't have welding access and want to mount one of our curved fenders! The kit includes everything you need to install the forward fender mount for our Curved Bobber Fenders! A bolt and nut to replace the stock mono-shock bolt, two bolts and nuts to mount the fender, spacers for either side of the mono shock support and leather washers to protect your fender paint from the bracket. 

The Pressio Bolt-On Fender Mount for our curved fenders takes all the trouble and guess work out of the forward mounting point for mounting a fender to your Honda Shadow, using the included bolts and nuts all you need to do is mark the location of the brackets on your fender, drill the holes in the fender and bolt everything together. 

This kit fits our curved fenders. It may fit other fenders but we cannot guarantee a fit.  The Pressio Bolt-On Fender Mount will only fit the VT600 VLX from 88-07

The bolt on fender mount uses the rear mounting bolt of your mono shock or mono strut to hold the fender in place and the kit includes a bolt to replace the stock mono-shock bolt. This is only the forward mounting kit. You will need to support the rear of the fender with either a sissy bar or strut kit. 

This kit works perfectly with our E-tanks, Curved Fenders, Mono Struts, and Bolt on Sissy Bars!  

You may also like

Quick view
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack
$15.00
Quick view
TC Bros-Kickback Sissy Bar DIY Kit Short
$215.00
Quick view
TC Bros - Springer Front End Brake Caliper Kit (Black)
$480.00
Quick view
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
$485.00
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack
TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack

TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack

$15.00

Leather Cushion Washers with 3/8 inch Hole 10 pack

These leather washers are perfect for protecting your paint and are more durable than rubber. The cushioning & dampening effect that these washers provide is perfect for installing between your frame and mounting tabs found on gas tanks, fenders, oil tanks, or anything else you want to protect from vibration. Also great for use under solo seat springs to prevent squeaking. Dimensions are 1 inch diameter x 3/8 inch hole x 1/8 inch thick. Sold in pack of 10 washers.

TC Bros-Kickback Sissy Bar DIY Kit Short
TC Bros-Kickback Sissy Bar DIY Kit Short
TC Bros-Kickback Sissy Bar DIY Kit Short
TC Bros-Kickback Sissy Bar DIY Kit Short

TC Bros-Kickback Sissy Bar DIY Kit Short

$215.00

TC Bros-Kickback Sissy Bar DIY Kit

This is exactly what you need for a sissy bar that fits your bike perfectly!

Kit includes a precision CNC bent sissy bar hoop, axle plate mounting tabs, 3/8-16 threaded radius bungs, mounting bolts, and leather washers to protect your paint.

Simply trim the hoop to your desired height and weld the included tabs and bungs to the hoop. The hoop is constructed from premium 1/2" diameter 1018 cold-rolled American steel for high strength and easy welding. The threaded radius bungs allow for mounting bolts to be hidden on the underside of your fender for a professional-looking installation. Universal design is perfect for both flat or round profile rear fenders.

For some extra style, use the TC Bros Mounting Bung Kit

Proudly made in the USA

TC Bros - Springer Front End Brake Caliper Kit (Black)
TC Bros - Springer Front End Brake Caliper Kit (Black)
TC Bros - Springer Front End Brake Caliper Kit (Black)
TC Bros - Springer Front End Brake Caliper Kit (Black)
TC Bros - Springer Front End Brake Caliper Kit (Black)
TC Bros - Springer Front End Brake Caliper Kit (Black)

TC Bros - Springer Front End Brake Caliper Kit (Black)

$480.00

Springer Front End Brake Caliper Kit 

Moto Iron™ Black Springer Brake Caliper Kit. #116-0060

  • Fits Moto Iron™ Sprigers, 1984 - 1999 Harley Factory Original Springer Front Ends, DNA, Hardbody (Mid-USA), Ultima, Bikers Choice, & Paughco Springers
  • Right side mounting for springer front ends (right is described while sitting on bike)
  • High performance 4 piston caliper fits on 11.5" rotor with 3/4" axle
  • Stainless steel pistons for corrosion resistance
  • Black finish
  • This kit includes everything shown in picture & brake pads
  • Maintenance parts avaible from us. (brake pads, seal rebuild kits, bushings)

TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)
TC Bros - Springer Front End Caliper Brake Kit (Chrome)

TC Bros - Springer Front End Caliper Brake Kit (Chrome)

$485.00

Springer Front End Brake Caliper Kit Right Side Chrome

Moto Iron™ Chrome Springer Brake Caliper Kit. #116-0053

  • Fits Moto Iron™ Sprigers, 1984 - 1999 Harley Factory Original Springer Front Ends, DNA, Hardbody (Mid-USA), Ultima, Bikers Choice, & Paughco Springers
  • Right side mounting for springer front ends (left is described while sitting on bike)
  • High performance 4 piston caliper fits on 11.5" rotor with 3/4" axle
  • Stainless steel pistons for corrosion resistance.
  • Triple chrome plated
  • This kit includes everything shown in picture & brake pads
  • Maintenance parts avaible from us. (brake pads, seal rebuild kits, bushings)

TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall
TC Bros - Sissy Bar Kickback Tall

TC Bros - Sissy Bar Kickback Tall

$230.00

Tall Kickback DIY Sissy Bar Kit

TC Bros. Tall (36") Kickback DIY Sissy Bar Kit is exactly what you need for a sissy bar that fits your bike perfectly!

Kit includes a precision CNC bent sissy bar hoop, axle plate mounting tabs, 3/8-16 threaded radius bungs, mounting bolts, and leather washers to protect your paint.

Simply trim the hoop to your desired height and weld the included tabs and bungs to the hoop.

The hoop is constructed from sturdy 5/8" diameter 1018 cold rolled American steel for high strength and easy welding. The threaded radius bungs allow for mounting bolts to be hidden on the underside of your fender for a professional-looking installation. Universal design is perfect for both flat or round profile rear fenders.

For some extra style, use the TC Bros Mounting Bung Kit

Proudly made in the USA.

36" overall length.

Next: TJ Brutal Curved Bobber Fender - Fits Rear Tires 160-170
Back to Fenders, Struts & Sissy Bars
Next: TJ Brutal Curved Bobber Fender - Fits Rear Tires 160-170