TURN YOUR STOCK BIKE INTO YOUR DREAM BIKE
WITH BLUE COLLAR BOBBER KITS!
Blue Collar Bobbers - Rear Fender Kit Volusia C50
Regular price $464.95Please note, our fender kit will not work with the stock seat.
All mounting brackets and struts are gloss black powder coated to match your frame. All hardware is included. Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. Everything bolts into place with no cutting or welding required. Sorry but our fender struts will not support a passenger.
Our super heavy duty aluminum fender is 1/8″ thick. To top it off we include steel reinforcement straps for all mounting areas. Order either the grey powder coated primer finish, bare aluminum with a clear anodized finish, or gloss black powder coated (additional $20). If you are painting your fender the primed surface is best since it is ready to lightly sand and paint. If you want the aluminum metal look, the bare fender would be the way to go. The anodized finish is very durable, but we don't recommend it for polish or paint.
Blue Collar Bobbers - 13” Super Cushion Vinyl Spring Seat Kit C50
Regular price $603.00
Please note, our seat kit will not work with the stock rear fender.
Refer to the 13″ regular spring seat kit descriptions for specific details for your bike make and model. The bike shown is a Honda 750 Spirit Chain Drive.
Your butt will love this seat! We use the best quality outdoor vinyl, which makes our seats the best in the business. The 1/8″ 6061 aircraft aluminum pan is curved just right to keep you in place. These aren’t imported seats!!! We make them right here in Sandy, Utah. 2 1/2″ ultimate grade foam is under the best quality vinyl. At 13″ wide our large seat is very comfortable. It’s the ultimate for longer rides. Our mounting brackets are heavy steel or aluminum and powder coated gloss black (to match your frame). 3/8″ diameter holes to mount your rear signal lights are located in the seat brackets. Every nut and bolt is included.
Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left-hand corner of the video to see the list of videos to choose from. No drilling or welding is required.
Blue Collar Bobbers - Front Fender Kit Volusia C50
Regular price $299.95The fender is designed to fit your Suzuki 800 model.
All mounting brackets and struts are gloss black powder coated to match your frame. All hardware is included. Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. Everything bolts into place with no cutting or welding required.
Our super heavy duty aluminum fender is 1/8″ thick. To top it off we include steel reinforcement straps for all mounting areas. Order either the grey powder coated primer finish, bare aluminum with a clear anodized finish, or gloss black powder coated (additional $20). If you are painting your fender the primed surface is best since it is ready to lightly sand and paint. If you want the aluminum metal look, the bare fender would be the way to go. The anodized finish is very durable, but we don't recommend it for polish or paint.
Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. It mounts in minutes.
Blue Collar Bobbers - Fender Light & Signal Kit
Regular price $314.60(FENDER NOT INCLUDED, SHOWN FOR REFERENCE ONLY)
This kit includes everything you will need to light the rear of your bike.
Our rear light kit is designed to mount to our license and seat brackets only, it will not mount to stock bikes.
Our tail light has the perfect combination of retro looks, bright LED light and a rugged mount. We have tried lots of lights and decided to make our own!
It's CNC machined from a solid 3″ (76mm) diameter aluminum billet. There are 15 super bright red LED lights that act as both tail light and stop light. The bright white LED light in the bottom lets the cops read your license plate at night and also adds extra light to the back of your bike. The mount is 12 gauge steel and the license plate mount is thick aluminum which is easy to cut or drill for those international sized plates. Everything is powder coated gloss black. You can lightly scuff the light and paint it your own color. The aluminum wire channel is easy to install and holds your wires under the fender and out of sight. The wires are 34 inches long and are color coded as per our instructional DVD.
This light wires to your bike directly without the need of resistors or other electronics. Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. No welding or cutting required.
Also includes two beautiful black nickel (DOT approved) dual filament bullet lights. These are extremely high quality lights that use 1157 colored regular bulbs (not LED). Load equalizers are NOT needed with these lights. Includes two replacement bulbs as shown. The lights are a little over 2″ in diameter. The smoked lens adds to the totally custom look. They mount to the bottom of our seat kit. All wires, crimpers, shielding and connectors make this a fun and easy install. No soldering is required.
Blue Collar Bobbers - Black Nickel Front Light Kit
Regular price $140.56This kit includes the beautiful black nickel (DOT approved) signal lights with dual filament 1157 colored bulbs (two replacement bulbs included).
Match them with the rear black nickel light kit. The mounting bracket is 10 gauge steel and gloss black powder coated.
Everything is included. Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. These lights are awesome! No soldering required.
Blue Collar Bobbers - 13” Spring Seat Kit Volusia C50
Regular price $603.00Please note, our seat kit will not work with the stock rear fender.
Your butt is our concern. We use thick, top of the line genuine leather which makes our seats the best in the business. The 1/8″ 6061 aircraft aluminum pan is curved just right to keep you in place. These aren’t imported seats!!! We make them right here in Sandy, Utah. 2″ ultimate grade foam is under the plain or laser engraved leather cover. At 13″ wide our large seat is very comfortable. It’s the best for longer rides and wider bottoms. Our mounting brackets are heavy steel or aluminum and powder coated gloss black (to match your frame). 3/8″ diameter holes to mount your rear signal lights are located in the seat brackets. Every nut and bolt is included. Our installation video, located just above the products, will show how easy it is to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. You will have to protect your leather seat from the elements.
You will have to cut and remove the original rear fender supports. No drilling or welding required.
Blue Collar Bobbers - Side Cover Kit Volusia C50
Regular price $115.95NOT RECOMMENDED FOR CALIFORNIA MODELS WITH AIR POLUTION CANISTERS.
The stock side covers are below the seat. They look like squirrels' cheeks, full of nuts. We make our side covers from 16 gauge steel and powder coat them gloss black. They mount flush with the frame rails and are hardly noticeable. Your tool kit on the left side will have to go, but the extra clean look is worth the sacrifice.
They bolt into place in minutes and no cutting or drilling is necessary. Our installation video, located just above the products, will show how easy they are to install. Be sure to click on the upper left hand corner of the video to see the list of videos to choose from. Get rid of those big ol' cheeks!!