Prism Tail Light LED Replacment
Prism Tail Light LED Replacment
Prism Tail Light LED Replacment
Prism Tail Light LED Replacment

Prism Tail Light LED Replacment

$39.95

Tail Light LED Replacement

Prism Tail light LEDs are direct replacements associated with Prism Supply tail lights. Prism Supply taillight assembly not included.

You may also like

Quick view
K & S LED License Plate Mounting Bolts
$49.95
Sold Out
Prism Supply Co. PS-41 Tail Light
$175.00
Sold Out
Motogadget mo.stop Relay
$83.00
Quick view
K & S LED License Plate Mounting Bolts
$46.95
K & S LED License Plate Mounting Bolts

K & S LED License Plate Mounting Bolts

$49.95

LED License Plate Mounting Bolts - Black

These License plate bolts are a discrete option to illuminated your license plate. Perfect for those who are running a tail light without plate light or has their plate mounted in a separate location from their tail light. 

Features:

  • License plate mounting bolts in a hex shape
  • LEDs flash - great for wiring to brake lights
  • Available in stainless steel or black finished stainless steel
  • LED colour -white

Note: Not for use where DOT lighting is required

Measurements:

14 mm dia., 28 mm W

Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light
Prism Supply Co. PS-41 Tail Light

Prism Supply Co. PS-41 Tail Light

$175.00

PS-41 Tail Light

This is the Prism version of the "RH-55 Guide Light" that originally came on Panheads and Ironheads. Overall dimensions are 3.375" x 2.5" x 1" thick, 30% smaller than the original. All light assemblies consist of the following:

  • Aluminum Housing
  • Injection Molded Prism Supply Lens
  • Dual brightness 1.85" diameter waterproof LED for running and brake lights
  • Stainless steel mounting hardware
Motogadget mo.stop Relay
Motogadget mo.stop Relay
Motogadget mo.stop Relay
Motogadget mo.stop Relay

Motogadget mo.stop Relay

$83.00

mo.stop

mo.stop, the adjustable, digital brake light modulator to increase driving safety.

Different flashing modes turn the standard brake light into a noticeable warning light. The following traffic recognizes the brake actuation of the motorcycle much better and faster. An important plus in safety on all two-wheelers, which is known to be easily overlooked. Especially for custom bikes and conversions with very small or low-lying brake lights.

The principle is partially already integrated into cars with high equipment ex-works (adaptive brake light).
In other countries, such as the USA, it is also widely used on motorcycles. Unfortunately not (yet) approved in Germany.

If the worst comes to the worst, the mo.stop does not have to be removed. Simply reprogramming by means of a dip switch is sufficient.

The mo.stop can also be used as a flasher relay with an automatic switch-off. Safety aspect!

The flasher unit automatically switches off the flasher (s) after 20 seconds if the appropriate setting is made. No more accidental continuous flashing!

Use as brake light control

  • Ultra-small and light, practically just a piece of cable with a tiny, candy-sized device
  • Laying in the wiring harness simply in series with the brake light
  • 6 different light / flashing variants adjustable for brake light
  • Almost independent of the load - therefore suitable for almost all LED brake lights (from 1 W) or conventional brake light bulbs
  • Super easy connection with just two cables - just connect in series
  • Short-circuit proof - automatic overload protection - protection against voltage peaks from the onboard network
  • No heat development during operation
  • Also suitable for 6 V brake light
  • Immediate, loss-free response of the brake light - waterproof and vibration-proof  

Use as flasher relay (without/with switch-off)

  • Almost independent of the load (from 1 W)
  • Always constant flashing frequency, therefore suitable for almost all LED indicators (from 1W), all micro indicators, halogen indicators, 10-watt indicators, 21-watt indicators, etc.
  • Ideal for custom bikes and conversions with limited space - no clunky standard relay
  • Works e.g. with 4 indicators or 2 handlebar end indicators, etc.
  • Super easy connection with just two cables - just connect in series
  • Also suitable for 6V indicators
  • Can be set as a flasher relay with automatic switch-off

Specifications and features

Housing L x W x H 26mm x 12mm x 10mm
Length of connection cable approx. 2 x 50 mm
weight approx. 6 g
K & S LED License Plate Mounting Bolts
K & S LED License Plate Mounting Bolts
K & S LED License Plate Mounting Bolts
K & S LED License Plate Mounting Bolts

K & S LED License Plate Mounting Bolts

$46.95

LED License Plate Mounting Bolts - Chrome

These License plate bolts are a discrete option to illuminated your license plate. Perfect for those who are running a tail light without plate light or has their plate mounted in a separate location from their tail light. 

Features:

  • License plate mounting bolts in a hex shape
  • LEDs flash - great for wiring to brake lights
  • Available in stainless steel or black finished stainless steel
  • LED colour -white

Note: Not for use where DOT lighting is required

Measurements:

14 mm dia., 28 mm W

Next: HighSider Proton Module Smoke
Back to Lighting
Next: HighSider Proton Module Smoke