K & S LED License Plate Mounting Bolts

$35.95

LED License Plate Mounting Bolts - Black

These License plate bolts are a discrete option to illuminated your license plate. Perfect for those who are running a tail light without plate light or has their plate mounted in a separate location from their tail light.

Features:

License plate mounting bolts in a hex shape
LEDs flash - great for wiring to brake lights
Available in stainless steel or black finished stainless steel
LED colour -white

Note: Not for use where DOT lighting is required

Measurements:

14 mm dia., 28 mm W

K & S LED License Plate Mounting Bolts

$33.95

LED License Plate Mounting Bolts - Chrome

These License plate bolts are a discrete option to illuminated your license plate. Perfect for those who are running a tail light without plate light or has their plate mounted in a separate location from their tail light.

Features:

License plate mounting bolts in a hex shape
LEDs flash - great for wiring to brake lights
Available in stainless steel or black finished stainless steel
LED colour -white

Note: Not for use where DOT lighting is required

Measurements:

14 mm dia., 28 mm W

EMGO 6 1/4" Classic Side-mount Headlight Assembly

EMGO 6 1/4" Classic Side-mount Headlight Assembly

$86.00

6 1/4" Classic Side-mount Headlight Assembly

Add great-looking style to any bike
Include a 60/55W H4 bulb
6-1/2" between fork ear mounting points
8mm x 1-1/4" threaded mount holes
Available in Gloss Black or Chrome

Motogadget mo.stop Relay

$62.95

mo.stop

mo.stop, the adjustable, digital brake light modulator to increase driving safety.

Different flashing modes turn the standard brake light into a noticeable warning light. The following traffic recognizes the brake actuation of the motorcycle much better and faster. An important plus in safety on all two-wheelers, which is known to be easily overlooked. Especially for custom bikes and conversions with very small or low-lying brake lights.

The principle is partially already integrated into cars with high equipment ex-works (adaptive brake light).
In other countries, such as the USA, it is also widely used on motorcycles. Unfortunately not (yet) approved in Germany.

If the worst comes to the worst, the mo.stop does not have to be removed. Simply reprogramming by means of a dip switch is sufficient.

The mo.stop can also be used as a flasher relay with an automatic switch-off. Safety aspect!

The flasher unit automatically switches off the flasher (s) after 20 seconds if the appropriate setting is made. No more accidental continuous flashing!

Use as brake light control

Ultra-small and light, practically just a piece of cable with a tiny, candy-sized device
Laying in the wiring harness simply in series with the brake light
6 different light / flashing variants adjustable for brake light
Almost independent of the load - therefore suitable for almost all LED brake lights (from 1 W) or conventional brake light bulbs
Super easy connection with just two cables - just connect in series
Short-circuit proof - automatic overload protection - protection against voltage peaks from the onboard network
No heat development during operation
Also suitable for 6 V brake light
Immediate, loss-free response of the brake light - waterproof and vibration-proof

Use as flasher relay (without/with switch-off)

Almost independent of the load (from 1 W)
Always constant flashing frequency, therefore suitable for almost all LED indicators (from 1W), all micro indicators, halogen indicators, 10-watt indicators, 21-watt indicators, etc.
Ideal for custom bikes and conversions with limited space - no clunky standard relay
Works e.g. with 4 indicators or 2 handlebar end indicators, etc.
Super easy connection with just two cables - just connect in series
Also suitable for 6V indicators
Can be set as a flasher relay with automatic switch-off

Specifications and features

Housing L x W x H	26mm x 12mm x 10mm
Length of connection cable	approx. 2 x 50 mm
weight	approx. 6 g

Prism Tail Light LED Replacment

$24.50

Tail Light LED Replacement

Prism Tail light LEDs are direct replacements associated with Prism Supply tail lights. Prism Supply taillight assembly not included.

Motogadget mo.wave Relay

$51.95

mo.wave

The mo.wave is the first digital flasher relay with a fade-in / fade-out effect. And also extremely small and independent of the load.

It lets every flashing light fade in and out softly - even LED turn signals! A new style and look for the flashing light - cool design for the flashing light.

Flashing lights that switch hard, especially LED turn signals, go on and off in a dumb and boring way - with the mo.wave you can make the turn signals glow in waves. A completely new look for the flashing light - ultra-small and light, practically just a piece of cable with a tiny device the size of a candy. Great for any type of rebuilt and styled motorcycle or car to attract more attention.

Attention: if you are looking for a flasher relay with automatic switch-off, please look at mo.stop.

advantages

Unique fade-in / fade-out effect
Ultra-small and light, practically just a piece of cable with a tiny, candy-sized device
Ideal for custom bikes and conversions with limited space - bulky standard flasher relays or load resistors are a thing of the past
Laying possible in the handlebar tube, frame tube, or in the wiring harness, for example
Almost independent of load (min. 1 watt)
Works completely with digital semiconductor technology. Control via a microprocessor. No mechanics, no coils, no contacts
Always constant and correct flashing frequency, therefore suitable for almost all LED turn signals, all micro turn signals, halogen turn signals, 10-watt turn signals, 21-watt turn signals
Works, for example, with 4 indicators or 2 handlebar end indicators
Immediate, lossless, brighter illumination of the turn signals
Super easy connection with just two cables - just connect in series
Completely waterproof and vibration-resistant because it is completely encapsulated
Short-circuit proof, automatic overload protection. Switches up to 100 watts of power.
no heat generation during operation
Operating voltage from 5V to 18V
Also suitable for 6V indicators
Quality 'made in Germany' - from motogadget

Hints

The easiest way to install the mo.wave is to look for the original relay and simply replace it with the mo.wave.

The mo.wave can NOT replace the pushbutton control when using pushbutton fittings. See product mo.relay + if you are looking for a flasher relay for buttons.

On the younger Harley-Davidson ™ models, the turn signal control is controlled by a special module (TSM / TSSM). The mo.wave can unfortunately NOT replace or supplement these modules.

Specifications and features

Housing L x W x H	18mm x 13mm x 9.5mm
Length of connection cable	approx. 2 x 50 mm
weight	approx. 4 g

Kuryakyn Kellerman Atto Lights

$181.95

Kellerman Atto Lights

Kellermann's HighPower L.E.D. Technology with Long Life Protection Guard® delivers maximum L.E.D. lifespan and spectacular brightness
IC controlled (integrated circuit), 330 kHz, for max L.E.D. lifespan & brightness, with minimum power draw
Engineered and made in Germany
Integrated running light, brake light, and turn signal
Sold Individually. You will need to add two to your cart for a pair