Name: Motogadget mo.blaze pin
Brand: motogadget
Price: 63.5 CAD
Availability: InStock

Motogadget mo.blaze pin

$63.50

mo.blaze pin

The mo.blaze pin from motogadget – setting new benchmarks for bolt-on turn signals with Power LED technology.

Its tiny dimensions and minimal design make it almost disappear on the vehicle. Due to the IntensiLED® Technology, the emitted light is extremely bright when switched ON and definitely can no longer be overseen. Additionally, greatest visibility and safety will be ensured by the patented TranzLight® Technology (TLT) with a wide beam angle.

The bolt-on turn signal is ECE approved as front and rear direction indicator. The aluminium casing is CNC machined and available with an anodized black or mirror polish surface.

Like any other typical LED turn signal, the motogadget turn signal can be operated with load resistors or any of our load-independent flasher relays (m.flash, m.wave, m.stop, m.relay+).

Please order two turn signals for a pair and four turn signals for front and rear use

Advantages

Absolute unique, new design and principle of operation (light control by TranzLight® Technology)
extremely delicate appearance due to transparent glass body and very small aluminium base
highest luminosity, achieved by state-of-the-art high output LED technology (IntensiLED®)
electronic voltage conditioning by IC controlled constant power source with 330kHz pulses and safe protection electronics
extremely bright light in radiation direction, highly visible light in nearly all directions

Parts delivered

1x m.blaze pin turn signal w/ M8 thread
M8 nut
Approx. 100 cm connector cable)
Installation instructions

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Specifications and features

Total lenght with thread	38,5 mm
Length without thread	19,5 mm
Biggest diameter	16 mm
Cable length	ca. 100 cm
Weight	ca. 12 g
Installation	M8 threaded bolt
Power consumption	ca. 3 Watt

Motogadget m.button

$79.95

m.button

Another innovation from motogadget: the m.button.
It's a big help - in combination with the new m.unit blue, basic and m.unit v.2 - in reducing 'cable clutter' and simplifying wiring harnesses.

Integrated into the handlebar tube - or any other adequate location - this tiny cylinder will electrically connect all handlebar instruments, switches and buttons.
Using state-of-the-art bus technology, the m.button digitally processes signals and transmits them to the m.unit over a thin cable.
The electrical consumers will then be switched inside the m.unit.
All control wires are moved into the handlebar. This saves space, weight, labour and time. A 'must have' for custom bikes with clean-look handlebars.

In simple facts:
a) normally, the operating current (e.g. headlight or turn signals) is transmitted directly via the wiring of the handlebar switches. Due to the high currents, cables with large cross-sections have to be routed from the fuse box to the switch and back to the electrical consumer.
The result: big cable bundles. Definitely, a 'no go' for custom bikes with restricted space or a concealed electrical system.

b) using the m.unit without the m.button, just a thin cable for each switch- or button-controlled feature has to be routed to the m.unit. These cables only carry minute control currents. All high loads and currents are switched directly at the m.unit and transmitted directly to the electrical consumers. This already leads to a significant reduction and simplification of the wiring harness. Here you can see the example of a circuit diagram.

c) using the m.unit blue, basic or m.unit v.2 in combination with the tiny m.button, you will once again reduce the amount of cables that have to be routed! All switches/buttons on the handlebar are connected at the shortest distance possible and concealed inside the handlebar. Consequently, you will have to route only ONE thin cable from the m.button to the m.unit. All loads and currents will be switched directly at the m.unit (see explanations above). A layout reduced to the max! Here you can see the example of a circuit diagram with use of m.button

The m.button is completely moulded in, making it water-tight and resistant to vibrations.

Specifications and features

The m.button is equipped with connections for
- turn signal, left side
- turn signal, right side
- headlight (low beam and high beam)
- E-starter
- horn
- brake light switch, front brake

m.button – dimensions
Diameter: 12 mm
Length: 25 mm
Cable length: approx. 60 cm
Connecting cable to m.unit: approx. 200 cm
Weight: approx. 30 g

Attention: The only intended use of the m.button is in combination with m.unit blue or m.unit v.2.

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Antigravity - AG-801 Battery (8-Cell)

$269.99

AG-801 Battery (8-Cell)

Small Case Lithium Battery

At a very small 4.25″ Length x 2.25″ Depth and 3.75″ Height (to the top of the terminals) this battery offers extreme power in the most compact size in Lithium Motorsport batteries. This battery is best used for applications where extreme weight loss and ultra compact size are desired and can be used for bikes from 600cc street use and 1200cc race use.

Features

Adhesive-Backed Foam Included for EASY INSTALLATION.
Most Compact of Lithium Motorsports Batteries available.
Ultra-Lightweight and High-Power Lithium-Ion Motorsport Battery.
Can hold a charge up to a year provided there are no “Parasitic Drains” (accessories that draw power when bike is off (i.e. alarms, ECUs, iPods, GPS, heated grips, etc).
Built in the USA to high quality standards.
Large all-brass terminal design.
Waterproof (Not intended for jetski use).
3-Year Warranty

Best Uses

Capable of every day use in bikes up to 750cc.
Great for use in all enduro bikes used for trail riding up to 750cc.
Race use for Enduro and MX electric start bikes up to 1000cc.
Race and Track Day use in motors up to 1200cc. (High Performance motors should use Antigravity Batteries AG-1201.)
Custom builds like cafe racers or small bore customs up to 800cc. (Please note if you use older classic bikes from mid 1980s and earlier you should update the charging systems to a modern voltage regulator.)

motogadget mo.switch basic

$155.00

mo.switch basic 3-button

The mo.switch basic is a universal, high-quality push-button control for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In combination with an electronic push-button control box (not included), these CNC-made push-buttons can switch all electrical units such as lights, indicators, electric starters, horn and much more.

CNC-milled from billet aluminum the housing is anodized in glossy black. Optionally, the button holder (inlay) is also available with a silver anodized colour. The compact housing is equipped with either two or three pushbuttons. All buttons are always in the direction to the driver.

The two or three buttons per unit are always black. A hidden M4 stainless steel mounting screw clamps the housing securely to each handlebar.

The individual buttons are of high quality, very robust and protected against vibrations and splash water (IP65).

Due to sufficient size and ergonomic pressure point (light, mechanical detent), they allow a safe operation - even when operating with a glove.

A single-wire or two-wire wiring is easily possible by two terminals per push-button. One terminal for ground is already provided internally for single-wire wiring. Cable routing in the handlebars is therefore easy.

In case of possible damage, the single push-buttons are available individually and can be replaced.

The mo.switch basic is of course compatible with all common push-button controls such as the mo.unit blue/basic.

Scope of delivery

mo.switch basic billet housing
2 or 3 push-buttons per unit
Manual

Prism Supply Co Vintage Safety Glasses

$39.00

Vintage Safety Glasses - Clear

Vintage-inspired safety glasses Contains side shields to keep bugs, metal, wood, etc. out of your eyes Lenses and frame are made of plastic If you're looking for our tinted safety glasses click here

"I wear these myself in the garage but also as riding glasses and I love them!" - Jeff

Antigravity - AG-401 Battery (4-Cell)

$185.99

AG-401 Battery (4-Cell)

Small Case Lithium Battery

The AG-401 battery, at a minuscule 4.25″ Length x 1.25″ Depth and 3.75″ Height (to the top of the terminals), offers extreme power in the most compact size in Lithium Motorsport batteries. The AG-401 is best used for Performance applications where extreme weight loss and ultra-compact size are desired. Can start inline 4-Cylinder motors up to 600cc for race use, or up to 250cc for everyday street use in scooters. This battery is also a favorite of custom builders who want the smallest battery to tuck out of the way.

Features

Adhesive-Backed Foam Included for EASY INSTALLATION.
Most Compact of Lithium Motorsports Batteries available.
Ultra-Lightweight and High-Power Lithium-Ion Motorsport Battery.
Can hold a charge for up to a year provided there are no “Parasitic Drains” (accessories that draw power when the bike is off (i.e. alarms, ECUs, iPods, GPS, heated grips, etc).
Built in the USA to high-quality standards.
Large all-brass terminal design.
Waterproof (Not intended for jetski use).
3-Year Warranty

Best Uses

Capable of everyday use in bikes up to 250cc.
Race use for Enduro and MX electric start bikes up to 450cc. (If you have a 250cc 2-stroke you will need to use the Antigravity Battery AG-801)
Race and Track Day use in inline 4 cylinder 600cc sportbikes (Honda CBR600 rider should use the Antigravity Battery: AG-801).
Custom builds like cafe racers or small bore customs up to 350cc. (Please note if you use older classic bikes from the mid-1980s and earlier you should update the charging systems to a modern voltage regulator; a damaged voltage regulator can overcharge the battery and damage it.)

The folks over at Prism Supply Co have come up with the perfect battery tray for the Antigravity 4 cell Battery. You can find it here!

TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack

TC Bros.-Leather Cushion Washers with 3/8 inch Hole 10 pack

$9.99

Leather Cushion Washers with 3/8 inch Hole 10 pack

These leather washers are perfect for protecting your paint and are more durable than rubber. The cushioning & dampening effect that these washers provide is perfect for installing between your frame and mounting tabs found on gas tanks, fenders, oil tanks, or anything else you want to protect from vibration. Also great for use under solo seat springs to prevent squeaking. Dimensions are 1 inch diameter x 3/8 inch hole x 1/8 inch thick. Sold in pack of 10 washers.

Motogadget mo.blaze disc

$158.95

mo.blaze disc

mo.blaze disc by motogadget – a turn signal for handlebar end installation in a trend-setting design.

The mo.blaze disc is the latest generation of turn signal lights. The characteristic feature of the LED turn signal is the transparent light-emitting disc on a compact aluminum base providing the harmonious finish of the handlebar end.

This is already the third generation of our turn signals using the motogadget TranzLight-Technology® (TLT, patent pending). This progressive approach to development is not limited to the miniaturization of turn signal casings. Furthermore, it creates new lighting concepts directly through a crystal-like plastic body. Only the precision of CAD calculations and state-of-the-art manufacturing processes allow this new design and its performance opportunities.

The luminous flux required for the TranzLight technology is generated by the intensiLED® procedure developed by motogadget. It consists of three important pillars:

Specifically selected, high output LED with maximum efficiency and 7W total output and a service life of more than 50,000 hours.
IC controlled constant power source with 330 kHz pulses.
Special collimator optics, that precisely bundles the emission light from the LED into the plastic body.

The subtle aluminium casing is used for the secure mount of the plastic body only and includes the electronic control system and high-end LEDs. Traditionally, the casing is machined using CNC technology, available with an anodized black or mirror polish surface and furnished with an elegant finish of laser inscriptions.

The turn signal for handlebar end installation has a very low construction height and, due to the transparent disc, the m.blaze shows up with a very neutral and subtle look. That's why the m.blaze is the perfect match to many styles and all types of motorbikes.

Like any other conventional LED turn signal, the turn signal kit can be operated with load resistors or any of our load independent flasher relays (m.flash, m.wave, m.stop, m.relais+).

The m.blaze disc has E mark and front turn signal approval.

Always make sure to order a complete set consisting of the left and right side turn signal assembly

Advantages

Completely unique, discrete design and functionality
Barely recognizable on handlebar when OFF
Extremely bright light to front side, well recognizable light output to rear side
State-of-the-art, high performance LED technology called IntensiLED
Electronic voltage conditioning and secure protection circuits
No need for turn signal indicator lights
Quite harmonious finish for handlebar end - especially when equipped with m-grip or other billet grips.

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Specifications and features

Diameter	35 mm
Overall length	68 mm
Partial length outside handlebar	20 mm
Partial length inside handlebar	48 mm
Cable length	ca. 100 cm
Weight	approx. 40 g
Mounting	Delivered with rubber clamping parts for steel and aluminium handlebars (22 mm and 1 in.) with 14 mm to 21 mm I.D.
Power consumption	approx. 7 Watt

Prism Supply Co Cloth Spark Plug Wires

$35.00

Cloth Spark Plug Wires

Prism Supply Co runs these spark plug wires on all of their Prism builds and we guarantee you won't be disappointed with the quality.

40" long
2 90° black spark plug boots
black coil boots
2 terminal ends

TC Bros Universal Frisco Gas Tank Mounting Kit

TC Bros Universal Frisco Gas Tank Mounting Kit

$36.95

Universal Frisco Gas Tank Mounting Kit

Includes 3/8"-16 Stainless steel button head bolts, 1018 mild steel tophat bungs, leather cushion washers, stainless steel washers.

Motogadget m.lock

$219.95

m.lock

The m.lock is a contact free digital ignition lock with RFID technology and substitutes mechanical ignition locks or their electrical switching feature respectively.

The associated digital key/transponder only has to be approached to the m.lock (switching distance approx. 40-50 mm) and the ignition is switched on or off completely contact free.

The m.lock is based on the latest RFID technology (Radio Frequency Identification) and therefore, unlike e.g. radio remote controls, tamper-proof. Each key/transponder has a unique digital code.
The m.lock can be actuated with the correct digital code only. Key/transponder and m.lock are absolutely free of mechanical wear.
The m.lock switches automotive relays with a possible load of up to 40A - sufficient power for every on-board system.

The hidden mounting of the small m.lock, covered by non-metallic parts like e.g. a plastic side panel, permits completely removing the mechanic ignition lock. Clean look and various design possibilities are guaranteed - especially for custom bikes!

The available option 'Glass Tube' is so small (3 x 13 mm) that it can be sewn into the glove. Please note the reduced switching distance (about 5-10 mm) of the Glass Tube transponder. The 2 included standard keys (teardrop shape) are key fob sized.

All keys/transponders are available as a replacement 'key blank' and can be 'taught' to the desired m.lock.

NOTE: We do not recommend using the m.lock combined with immobilizers! Contact your dealer/manufacturer for informations about the possible deactivation of the immobilizer.

Advantages

RFID technology is tamper-resistant
Each key has a unique code
The key first activates the m.lock without touching it and then, via the relay, the entire on-board system
Neither key nor m.lock suffer from mechanical wear
The key requires no battery - failsafe
No overload or scorched pins possible due to indirect switching via the 40 A main relay
The m.lock is very compact an can be mounted hidden in many places
Water tight and vibration resistant because of the moulded-in construction
Depending on the model, key sizes range from very small (key fob sized) to tiny (glass vial) and may be integrated into other objects like gloves, clothing, pendants (NON-METALLIC!) etc.
Keys can be easily purchased and 'learned' to any m.lock - your integrated locksmith
A switching distance of 4 - 5 cm ensures convenient switching while excluding the possibility of accidental engagement
An integrated LED shows the status of the m.lock while mounting, connecting and 'teaching' new keys

Parts delivered

m.lock with approx. 50 cm connector cable
1 user key and 1 master key (teardrop shape)
1 automotive relay 12V/40A
4 flat pins with isolating sleeves
Connector
Removable fuse
Detailed installation and operating instructions

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Specifications and features

Transmitter/receiver, diameter of installed assembly	30 mm
Height	14 mm
Cable length	approx. 50 cm
Weight incl. cable	approx. 30 g
Fixture	2 x M3 threaded hole on back side
Operating voltage	6V - 18V
Operating temperature	-20 °C... +80 °C

TC Bros-Kickback Sissy Bar DIY Kit Short

TC Bros-Kickback Sissy Bar DIY Kit Short

$115.95

TC Bros-Kickback Sissy Bar DIY Kit

This is exactly what you need for a sissy bar that fits your bike perfectly!

Kit includes a precision CNC bent sissy bar hoop, axle plate mounting tabs, 3/8-16 threaded radius bungs, mounting bolts, and leather washers to protect your paint.

Simply trim the hoop to your desired height and weld the included tabs and bungs to the hoop. The hoop is constructed from premium 1/2" diameter 1018 cold-rolled American steel for high strength and easy welding. The threaded radius bungs allow for mounting bolts to be hidden on the underside of your fender for a professional-looking installation. Universal design is perfect for both flat or round profile rear fenders.

For some extra style, use the TC Bros Mounting Bung Kit

Proudly made in the USA

TC Bros. - XS650 Builders Exhaust Kit

$148.95

XS650 - Builders Kit

TC Bros. Do it yourself exhaust kit for all years of the Yamaha XS650.

Kit Includes 2 flanges and collars to fit your stock XS650 head, 2 mandrel bent 90 degree pieces, 2 mandrel bent 180 degree pieces and 2 straight length pieces.

Tubing is 1.5 inch diameter 16 gauge mild steel and is bent on a 3" Centerline Radius. Flanges are 1/4 inch thick. Plenty of material is included to make just about any custom exhaust that you think of!

Made in the USA.

TC Bros. Side Mount License Plate Bracket (with no light)

TC Bros. Side Mount License Plate Bracket (with no light)

$44.95

TC Bros. Side Mount License Plate Bracket (with no light)

The unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut mounting holes in the bracket. The axle mount hole is .787" diameter so this can be used on Harleys with 3/4" axles and Metric bikes with 20mm axles.

This is the most versatile bracket on the market! Your mounting options and licence plate positions can be mixed and matched to give you the unique look that you are going for.

The bracket is powdercoated gloss black and comes with stainless steel button head bolts/nuts.

Use our LED License Plate Lights/Bolts (TC Bros. #107-0037) to keep your bike legal.

This plate holder is designed for holding a license plate only (not for use with a tail light). For side mounted plate holders with tail lights, please see our other products.

Made in USA.

Motogadget Motoscope mini

$379.95

motoscope mini

The motoscope mini is a highly compact digital instrument for motorbikes.

The LED display we created for the motoscope mini is unique in the instrument realm. 251 ultra bright LEDs provide for an essentially rimless and extremely readable display surface which can entirely be used for the display of readings. This intricate and innovative technology combines a maximum of display surface with minimal casing dimensions.

The unadorned and elegant design of the motoscope mini and its high class appearance fits every bike, trike or four-wheel vehicle. Exposed mounting can reinforce style and looks, but it might just as well be installed more discretely and 'clean' - with the mini, everything is possible!

Casing

The high-quality aluminium casing is machined from solid metal and its surface is black anodized. The mirror polished variant has its own appeal. Electronics come completely moulded-in and are immune to weather, water, dust and vibrations.

Display and features

The innovative, ultra bright 251-LED dot matrix shows the engine speed in a scalable horizontal bargraph and all other features as easily readable numeric values. With the push of a button, the engine speed can be displayed as numerical value (rpm) as well.

For optimal readability in dark, sunlight and dawn conditions, the LED luminosity varies automatically.

Specific engine speed thresholds can be programmed for the display to show the maximum permissible engine speed ('red zone') or a gear shift light with all LEDs pulsating simultaneously.

The kicker: The display of the motoscope mini not only displays numeric values from left to right but from top to bottom as well. Thus, the instrument may also be mounted vertically!

Operation

You can toggle between the different informations on the LED display by operating the provided menu push-button or e.g. the headlight flasher push-button on the handle bar.

By default, the display shows the speed value. Other values may be displayed via push-button operation if needed. A feature for automatically switching back to the speed value after a predetermined time or leaving the manually chosen value on the display is provided.

Default settings or recorded values are of course stored even with the power supply switched off.

Mounting

Due to its compact dimensions, the motoscope mini is easily mounted just about anywhere on any vehicle. Single mount on your triple clamp or right onto the handle bar, embedded into already present instrument panels, into the tank or FBE - this instrument is applicable anywhere.

We offer universal mounts as well as brand specific solutions e.g. for Buell or Harley-Davidson. Please refer to 'Mounting'.

Connection and sensors

Hassle-free wiring and the detailed installation and operating instructions enables even users without any previous experience in handling the vehicles electrical system to connect this instrument.

The supplied speedometer sensor in stainless steel is very small (M5/25 mm). The 1.5 m connector cable easily connects it to the front or back wheel. This permits easy conversions of originally mechanical speedometer drives.

The motoscope mini is compatible with various original speedometer sensors (reed contact and proximity sensors) used by motorbike manufacturers. In these cases, only the terminals have to be connected while the installation of mechanical sensors will be completely obsolete.

An intelligent 'teaching' function provides for easy speedometer calibration - even in cases of vehicles with sensors at the gear box.

Parts delivered

Instrument with approx. 75 cm connector cable
Mini push-button
Removable fuse
6 cable end connectors
Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
2 powerful neodymium mini magnets
2 mounting screws M3
Detailed installation and operating instructions

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Antigravity - AG-1201 Battery (12-Cell)

$332.99

AG-1201 Battery (12-Cell)

Small Case Lithium Battery

The AG-1201 battery has 360 Cranking Amps yet is only 4.50″ Length x 3.25″ Depth and 4.25″ Height (to the top of the terminals). This battery is a great choice for those seeking very high power in a compact battery. It can replace the typical 12 Ah lead/acid battery with a weight savings of up to 7 pounds while offering much more cranking power. This battery is best used for applications where extreme weight loss and ultra compact size are desired.

Features

Adhesive-Backed Foam Included for EASY INSTALLATION.
Most Compact of Lithium Motorsports Batteries available.
Ultra-Lightweight and High-Power Lithium-Ion Motorsport Battery.
Can hold a charge up to a year provided there are no “Parasitic Drains” (accessories that draw power when bike is off (i.e. alarms, ECUs, iPods, GPS, heated grips, etc).
Built in the USA to high quality standards.
Large all-brass terminal design.
Waterproof (Not intended for jetski use).
3-Year Warranty

Best Uses

Capable of every day use in bikes up to 1100cc (For more capacity and power use the Antigravity AG-1601).
Race and Track Day use 1500cc.
Custom builds up to 1200cc. (If using a high-performance motor use the Antigravity AG-1601).
4 Cylinder Race Cars up to 1800cc.

motogadget mo.switch basic

$135.00

mo.switch basic 2-button

The mo.switch basic is a universal, high-quality push-button control for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In combination with an electronic push-button control box (not included), these CNC-made push-buttons can switch all electrical units such as lights, indicators, electric starters, horn and much more.

CNC-milled from billet aluminum the housing is anodized in glossy black. Optionally, the button holder (inlay) is also available with a silver anodized colour. The compact housing is equipped with either two or three pushbuttons. All buttons are always in the direction to the driver.

The two or three buttons per unit are always black. A hidden M4 stainless steel mounting screw clamps the housing securely to each handlebar.

The individual buttons are of high quality, very robust and protected against vibrations and splash water (IP65).

Due to sufficient size and ergonomic pressure point (light, mechanical detent), they allow a safe operation - even when operating with a glove.

A single-wire or two-wire wiring is easily possible by two terminals per push-button. One terminal for ground is already provided internally for single-wire wiring. Cable routing in the handlebars is therefore easy.

In case of possible damage, the single push-buttons are available individually and can be replaced.

The mo.switch basic is of course compatible with all common push-button controls such as the mo.unit blue/basic.

Scope of delivery

mo.switch basic billet housing
2 or 3 push-buttons per unit
Manual

Motogadget motoscope pro

$599.95

motoscope pro

The motoscope pro is the most recent generation of motogadget's digital dashboard series.

Cutting-edge technology enables us to create ultra-slim casing designs. 734 LEDs - governed by a 16-bit RISC processor - create an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.

The rev-counter is displayed fully scalable via the analog LED band with a drag indicator function. The main and secondary displays are user-configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals via the Breakout Boxes. The motoscope pro is equipped with a fully-fledged CAN-bus interface and thus ready for many of tomorrow's developments like for example the plug 'n ride Breakout-Box Triumph (please see tab 'Triumph' above).

The dashboard communicates over a proprietary digital one-wire bus (m-Bus) with additional Breakout Boxes to easily expand the application spectrum. This makes the dashboard highly versatile and makes application to a wide range of vehicles and tasks possible.

The billet aluminum casing is CNC-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE and does not have to be registered.

Please order the Breakout Box to connect indicator light signals (see Breakout Box Std.) or to connect digital bus systems (Triumph, H-D) additionally. For BMW R9T a Breakout Box is not necessary.

Parts delivered

Instrument with ca. 55 cm connector cable
Speedometer sensor M5 x 0,5 fine-pitch thread (stainless steel, IP67) with ca. 150 cm connector cable
2 magnets
10 cable end connectors
In-line fuse
2 stainless steel screws
Detailed installation and operating instructions

Please note: Touch sensor not included anymore.

**Please note that some Motogadget items can take up to 2 weeks to come in. Please contact us for availability and more information

Specifications and features

Length, Height, Depth	109 mm/ 47 mm/ 11 mm
Weight w/ cable	approx. 100 g
Mount	2 x M3 threaded hole
Power consumption, operating	max. 200 mA (load dependent)
Power consumption, standby	0.4 mA (load dependent)
Operating voltage	9 V - 15 V
Operating temperature	-20°... +80°C
Rev counter (LED bargraph)	0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer	0 – 350 km/h or mph
Trip meter A	bis 999.9 km or mi
Trip meter B	bis 999.9 km or mi
Total mileage (adjustable)	bis 250000 km or mi
Operating hours/Service	0 – 9999.5 h
Clock	23:59 h/min
Timekeeping	0 – 99:59:59 h/min/s
RPM count (on LCD)	0 – 20000 rpm
Adjustable RPM warning (gear shift flash)	0 – 20000 rpm
On-board voltage	9 – 18 V
Low voltage warning	Warning if below ca. 11V
Timekeeping 0 - 100 km/h or 0 - 60 mph	0.00 – 30.59 sec.
Actual accelleration	+/- 0.00 – 1.50 G
Average speed	0 – 350 km/h or mph
Max. speed	0 – 350 km/h or mph
Max. RPM	0 – 20000 rpm
Max. positive acceleration	+1.50 G
Max. negative acceleration	- 1.50 G
Gear display	N, gear 1 - 6
Green control LED (w/ breakoutbox A/B)	Neutral (N)
Green control LED (w/ breakoutbox A/B)	Turn indicator left/right
blue control LED (w/ breakoutbox A/B)	High beam
Red control LED (w/ breakoutbox A/B)	Miscellanious warning funktions
Fuel/Reserve (w/ breakoutbox A/B)	0 - 100% w/ low warning
Air temperature* (w/ breakoutbox B)	-20 - 80 °C / -4 - 176 °F w/ high/low warning
Water temperature* (w/ breakoutbox B)	40 - 120 °C / 104 - 248 °F w/ high/low warning
Oil temperature* (w/ breakoutbox B)	40 - 150 °C / 104 - 302 °F w/ high/low warning
Oil pressure* (w/ breakoutbox B)	0 - 8 bar / 0 - 116 psi w/ high/low warning

Prism Supply Co Glass License Plate Jewels

Prism Supply Co Glass License Plate Jewels

$28.50

Glass License Plate Jewels

These vintage style glass jewels are great for mounting your license plate or any other mounting application. They consist of a #10 mounting shaft. Sold as a pair.

TC Bros Weld-On Rear Ribbed Fender Mount

TC Bros Weld-On Rear Ribbed Fender Mount

$26.95

Weld-On Rear Ribbed Fender Mount

universal fit, weld-on ribbed fender mounting bracket is constructed from a single piece of 1/4" thick American made mild steel for easy welding.

Vintage style curves and contours provide eye appeal while the 5/16" diameter mounting holes make for a simple installation. 1018Mild Steel CNC Machined bungs are provided to weld directly to your ribbed fender.

This fender bracket is most commonly used to mount ribbed fenders to a frame cross member. The straight portion of the bracket is easily trimmed to length to fit your application.

Combine this bracket with a set of our universal fender struts (SKU #104-0008) and you have a fender mounting system that will withstand the most demanding rigid frame applications. Sold individually.

Proudly made in the USA.