Introducing our new Performance Risers. Based on our original Pull Back Risers design, still a trendsetter in the industry, our Performance Risers feature a precision machine-cut body that delivers all the performance advantages with a more aggressive look. They come equipped with our new Performance Top Clamps featuring ARP hardware and are fully compatible with all the same accessories as our OG risers.
Our Performance Risers are available in three different rise heights. They feature integrated inner grooves that allow cables to be routed through the riser body, with internal drilling from the clamping area down through the risers for a clean installation. Control wires are hidden using our premium Carbon Fiber Wire Brackets, which are included with every Performance Risers kit.
*Works with any standard 1 1/8" handlebar (most MX Style bars). Use our shims set to run your favorite 1" handlebar.
Fits on all models with 3.5" center-on-center riser spacing (most H-Ds models)
OG Performance Digital Gauge Top Clamp will fit M8 Softails OEM Digital Gauge models; 2022-2024 Low Rider ST FXLRST, 2018-2024 Street Bob FXBB, 2018-2024 Standard FXST & 2023-2024 FXBR type Digital Gauges
OG Performance Digital Gauge Top Clamp will fit with the KOSO D2 Gauge for all models including baggers. Installation requires the KOSO D2 gauge rubber gasket, sold separately
These solid handlebar riser bushings fit all bikes with a 34mm riser pocket in the top tree. These will work with the stock Honda Shadow handlebar risers, as well as with aftermarket handlebar risers. In some cases if you drill out the stock metal bushings inside the Honda Shadow top clamp, you will be able to mount aftermarket handlebar risers or Harley risers in your top clamp!
Includes:
QTY 2 Upper Bushings - Thicker for the top of your top clamp
QTY 2 Lower Bushings - Thinner for the bottom of your top clamp
Some people may need the lower bushings some may not, enough people gave feedback that they would be helpful so we decided to make sure you have what you need!
These do not replace the stock rubber bushings that are permanently in your top tree, they replace the removable rubber bushings under the risers.
Please pull your risers off to make sure you have a 34mm pocket. some models of VT750 and VT1100, VTX and other shadows did not have this pocket.
ONLY ONE SET NEEDED TO STABILIZE YOUR RISERS
Your Honda Shadow stock top clamp has rubber riser bushings that get mushy over time and your bars can flex pretty bad. This leads to poor handling and a dangerous situation when you need to handle your bike quickly to avoid a collision. The solution to this is to use these solid riser bushings for a positive connection between bars and front suspension.
NOT NEEDED FOR HONDA SHADOW AERO YEARS 2005-2007
Moto Iron Springer Riser Adapter - Chrome
Regular price
$195.95
Handlebar Riser Adapter for Springer Front Ends 3.5" centers - Chrome
Use this bracket to adapt your 4.75" springer riser spacing to the more common 3.5" spacing found on standard Harley front ends. This enables you to run many different styles of handlebars on your aftermarket springer front end including riserless handlebars with 3.5" spacing. Note that this adapter will NOT work with risers that are "bolt-thru" style (such as TCB Part #101-0040, #101-0041, #101-0042, #101-0043). Any handlebar risers used with this adapter must be internally threaded with 1/2-13 internal threads. Please also note that this adapter only fits AFTERMARKET springer front ends with 1/2-20 internal threads (brands such as Moto Iron, Paughco, DNA, Hardbody, etc.). This adapter does not fit OEM Harley springer front ends as they have larger diameter riser threads.
Biltwell Slimline Risers 1" - Polished
Regular price
$219.95
1" Slimline Risers - Polished
Description
One of our first investment-cast parts remains a popular bolt-on for DIY customizers and pro builders alike. Stainless steel for durability and pure vintage style. One-inch bar clamps and 1/2-13 t.p.i. mounting holes make our Slimline riser a great choice for a wide range of custom motorcycles.
Technical Details
Investment-cast stainless steel construction
1.75-inch rise from mounting base to centerline of the handlebar clamp
Polished raw or black electroplated finishes are available
Accepts stock H-D or aftermarket 1/2-13 t.p.i. mounting hardware
Bar clamps feature 5/16-18 t.p.i. stainless-steel Allen cap screws
Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.
Form and Function
With their timeless styling and proven investment-cast construction, Slimline risers look and work great on any stock or custom motorcycle you can imagine. Slimline's short 1.75-inch rise gives our all-time best-seller a compact presence on fork trees. NOTE: If your motorcycle has removable bar clamps and the top tree accepts 1/2-inch O.D. mounting hardware, chances are our Slimline riser will fit. Nevertheless, don't jump into this customizing exercise without double-checking fitment on your motorcycle first.
TC Bros Springer Riser Adapter - Black
Regular price
$195.95
Handlebar Riser Adapter for Springer Front Ends 3.5" centers - Black
Use this bracket to adapt your 4.75" springer riser spacing to the more common 3.5" spacing found on standard Harley front ends. This enables you to run many different styles of handlebars on your aftermarket springer front end including riserless handlebars with 3.5" spacing. Note that this adapter will NOT work with risers that are "bolt-thru" style (such as TCB Part #101-0040, #101-0041, #101-0042, #101-0043). Any handlebar risers used with this adapter must be internally threaded with 1/2-13 internal threads. Please also note that this adapter only fits AFTERMARKET springer front ends with 1/2-20 internal threads (brands such as Moto Iron, Paughco, DNA, Hardbody, etc.). This adapter does not fit OEM Harley springer front ends as they have larger diameter riser threads.
Biltwell Slimline Risers 1" - Black
Regular price
$219.95
1" Slimline Risers - Black
Description
One of our first investment-cast parts remains a popular bolt-on for DIY customizers and pro builders alike. Stainless steel for durability and pure vintage style. One-inch bar clamps and 1/2-13 t.p.i. mounting holes make our Slimline riser a great choice for a wide range of custom motorcycles.
Technical Details
Investment-cast stainless steel construction
1.75-inch rise from mounting base to centerline of the handlebar clamp
Polished raw or black electroplated finishes are available
Accepts stock H-D or aftermarket 1/2-13 t.p.i. mounting hardware
Bar clamps feature 5/16-18 t.p.i. stainless-steel Allen cap screws
Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.
Form and Function
With their timeless styling and proven investment-cast construction, Slimline risers look and work great on any stock or custom motorcycle you can imagine. Slimline's short 1.75-inch rise gives our all-time best-seller a compact presence on fork trees. NOTE: If your motorcycle has removable bar clamps and the top tree accepts 1/2-inch O.D. mounting hardware, chances are our Slimline riser will fit. Nevertheless, don't jump into this customizing exercise without double-checking fitment on your motorcycle first.