All

Insta360 Ace Pro + 128 GB MicroSD Card

Co-engineered with Leica, the Insta360 Ace Pro boasts truly superior imaging performance courtesy of an elite 1/1.3" sensor, 5nm AI chip, and Leica SUMMARIT lens. Creators can enjoy stunning 4K120fps video, 48MP photos, PureVideo for low light shooting, PD fast charging to 80% in just 22 minutes, and more.

The Insta360 Ace Pro is packed full of unique, smart shooting features that utilize the latest in AI developments. Practical elements like a vlogging-friendly 2.4" flip touchscreen provides excellent creative flexibility. Meanwhile, innovative functions such as the option to pause or cancel a recording, gesture and voice control, plus the brand new AI Highlights Assistant and custom-keyword based AI Warp feature transform the shooting and editing experience.

As a major determinant of a camera's image quality, Ace Pro's premium 1/1.3" sensor immediately sets it apart from many of its competitors. It captures more light and offers far better dynamic range, making it capable of high-level performance even in fast-moving action scenarios or with challenging lighting. Not only that, but Ace Pro was co-engineered with Leica, bringing all their expertise in optical design and imaging to the camera.

Ace Pro also has a unique, dedicated shooting mode for low light: PureVideo. Powered by a 5nm AI chip, the camera uses a custom-trained AI neural network to denoise the footage for a clearer image in real time. Meanwhile, that big, beautiful sensor on Ace Pro captures huge levels of detail with impressive stabilization, even at night! This expands the use you'll get out of the camera, from twilight strolls to late-night urban shooting.

During the day, again Ace Pro comes packing heat with built-in Active HDR (High Dynamic Range). This is especially helpful for shooting scenes with both bright and dark areas, with more details in the highlights and shadows and more vibrant footage. A serious amount of work has also gone into colour accuracy. Ace Pro delivers accurate and rich colours, excelling even when underwater.

AI is a key element in the overall image quality too. Insta360’s dedicated R&D teams have specifically trained computational photography models, based on the camera's unique lens and sensor data. This model underpins the 48MP Photo Mode and 4K30fps PureVideo, enhancing both the signal-to-noise ratio and dynamic range in low light, surpassing all other action cameras on the market in the process.

A Smarter Way to Shoot | Inside and Out

Ace Pro's robust 2.4" flip touchscreen lets you see exactly what you're shooting at all times, making framing your shots a breeze. This flexibility makes the camera incredibly useful for vlogging, selfies, hard-to-capture angles, and various action scenarios for optimal preview. What's more, a magnetic mounting system lets you quickly mount your camera and seamlessly switch between accessories. Less fussing with screws and knobs, more filming the action.

Internally, a series of new features solve problems that have plagued action enthusiasts for years:

Clarity Zoom
Want a close-up but the image quality becomes too poor? Ace Pro can zoom in and out 2x without any loss in quality.
 

Gesture Control
Use hand signals to start/stop recording or take a photo! Perfect for group selfies, noisy environments, or if using voice control doesn't feel right (though it has this function too).
 

Cancel Recording
Failed the trick? Messed up a line? Instantly cancel the recording and go again, saving space on the SD card and fewer files to sort through.
 

Pause/Resume Recording
Time between shots? Hit pause and record to keep everything you want to film in one continuous file for easier file management and editing.
 

Photo Grab
You're filming a video when an ideal photo op presents itself. Keep filming and take a photo at the same time, but in far higher resolution than a screen grab from the video.

Unlock Your Creativity

The Ace Pro comes equipped with a unique Stats Dashboard and is the first action camera to integrate seamlessly with your Garmin device or Apple Watch, allowing you to overlay your videos with GPS, speed, and other data. Share your adventures with a new level of detail, whether you're cycling, running, or enjoying the great outdoors.

AI Warp is another new creative tool, the latest addition to Insta360’s expanding Shot Lab lineup. Through preset or custom keywords, you can add dynamic effects to your videos. This premium AI feature is highly customizable, giving your footage an incredibly unique twist based off of any prompt you can think of. As Insta360 continues to embrace the game-changing capabilities of AI, you can expect more features added to Shot Lab on the Insta360 app heading into 2024.

The Ace Pro also features Insta360's signature eye-popping shooting modes, including the ability to shoot timelapses, hyperlapses (in TimeShift mode) and so much more. The infamous Invisible Selfie Stick effect is also possible with the Ace Pro via the new AI Selfie Stick Eraser, rendering your selfie stick invisible in shots for an immersive third-person experience.

AI Highlights Assistant

Insta360 likes to make shooting as easy as possible, but every creator knows that feeling of looking at an intimidating number of files and not knowing where to start. Enter the revolutionary new tool, AI Highlights Assistant.

First, it automatically detects the peak moments in a video, and delivers 'clip highlights' for in-camera review. Creators can merge every thrilling moment into one incredible recap, or choose the ones they like, and quickly delete any unwanted clips to save storage.

And like magic, the Assistant will also edit your latest adventures into one epic video and push it directly to your phone or mobile device via the Insta360 app. Look back on all your Moments and relive unforgettable memories, just like the first time.

The Insta360 app is also packed full of advanced AI editing tools. Take advantage of slick auto-editing tools to have your clips ready in moments, or go manual with our full editing suite. There's really no limit to what you can do.

• Bundle includes 1x Ace Pro, 1x 1650mAh Battery, 1x Standard Mount, 1x Flexible Adhesive Mount, 1x Type-C to C Cable, and 128 MB MicroSD card
• A 3-Prong to 1/4" Adapter (sold separately) must be attached to the Standard Mount to mount the camera on a selfie stick or other accessory.
• Selfie stick sold separately
• Note: Pre-installed Lens Guard cannot be removed/replaced. Free repair within 1 year of purchase, excludes shipping.

Dry Shower

Muc-Off Dry Shower is an innovative antibacterial body wash designed for people on the move. Whether you’re a cyclist, commuter, lunch time trainer, festival goer, camper, backpacker, trail runner, motorcyclist or just an all around active person. Dry Shower is the perfect way to freshen up without water!

Specifically formulated to kill odour causing bacteria and germs with its gentle yet effective, coconut derived cleaning ingredients, Dry Shower leaves you feeling (and smelling) fresh and clean. We’ve even made sure Dry Shower is safe to use by creating a formula that’s free from parabens and formaldehyde.

With Dry Shower’s foaming action simply apply and rub in with your hands, then leave to dry or wipe off with a towel.

Dry Shower is suitable for vegans and is cruelty free.

• Formulated with coconut
• Kills odour causing germs and bacteria
• No water or towel needed
• Paraben and Formaldehyde free
• Kills 99.9% Germs

Simpson Ghost & MOD Bandit Interior Shield

Never get caught squinting into the sun again. The Simpson interior drop-down shield gives you instant tint control without stopping to swap visors — flip it down when the sun hits, flip it up when the light drops. Available in four tints to match your riding style and conditions.

Fitment

• Compatible with Simpson Ghost Bandit, Venom, and MOD Bandit helmets
• Drop-down interior sun shield — operates independently of the outer visor
• Direct OEM replacement — no modification required

Choose Your Tint

• Clear – Full optical clarity for night riding, tunnels, and very low light. The go-to when you need maximum visibility.
• Amber – Enhances contrast and depth perception in overcast or variable conditions. Ideal for dawn, dusk, and cloudy days.
• Hi-Def Blue – Originally developed for desert racers in dusty conditions. Like amber, it sharpens contrast — with a cooler, distinctive look.
• Dark Smoke – Cuts glare effectively in bright sunlight. The most popular choice for daytime riding in full sun.

Why an Interior Shield?

Swapping exterior visors mid-ride is a hassle. The Simpson interior shield lets you adapt to changing light in seconds — no tools, no stops, no fumbling. It’s one of the most practical upgrades you can make to your Ghost Bandit or MOD Bandit setup.

Pro Series MX Style Shifter Peg - Black

TC Bros. Pro Series MX Shifter Peg (sold each) is designed with the high-performance Harley Davidson rider in mind. Inspired by the off-road racing world and refined for the ultimate on-road experience, this peg provides high traction and stability. Precision machined right here in the USA from the highest quality materials, this shift peg is extremely strong and lightweight. Providing 360-degree adjustability and a design that perfectly complements a set of our Pro Series MX or MX Lite foot pegs, these pegs also work very well as both a shifter peg and a brake pedal on our Pro Series mid controls kits.

Features:

• 360-degree adjustable to provide a perfect angle to fit your bike and foot. 
• CNC machined from strong and lightweight 6061-T6 aircraft-grade aluminum. 
• Replaceable stainless steel cleats will not rust and are specifically machined to provide the proper amount of traction for motorcycle footwear.
• 2" long x 1" wide surface provides excellent engagement, while the large radius profile on the underside prevents tearing up the toe surface of your footwear while upshifting.
• Black anodized finish for great looks and corrosion resistance (other finishes available). 
  
• Proudly made in the USA.
• Peg installs using basic hand tools.
• Replacement parts and tech support after the sale.

Fitment:

• Peg includes 5/16-24 socket head mounting hardware that fits OEM shifters on most Harley Davidson models including Dyna, FXR, Softail, Touring, and Sportster models (excluding water cooled "Revolution Max" engine models). 
• Compatible with TC Bros. brand mid controls and forward controls kits. Note that these are sold each, and 2 would be required for any TC Bros. brand foot controls kits.

5x Premium Brush Set

A kit with every type of brush we make. So you can get into every nook and cranny of your bike, so there’s no more missed mud spots!

HIGHLIGHTS

• Premium brushes with ergonomic design
• 5 brushes specifically designed for bikes
• Ideal for giving your bike an all-over clean

DETAILS

Our Soft Washing Brush with sintered bristle compound is designed to clean your frame and components while caring for delicate finishes. It’s all new design features a tough, impact resistant handle that won't slip in extreme conditions, an oversized head for fast cleaning of large areas and rubberised impact zones for maximum protection.

Our Detailing Brush is ideal for reaching hard-to-shift dirt on sprockets, hubs and other tight areas such as suspension mounts or fork crowns. It’s new design features a tough, impact resistant handle that won't slip in extreme conditions, durable nylon bristles and rubberized impact zones for maximum protection on delicate finishes.

Our Claw Brush features high quality construction with triple brush heads with tough nylon bristles and an integral scraper for mud de-clogging. It’s ideal for chain, cassette and sprockets, and it’s even 10-speed compatible.

Our Wheel & Component Brush is shaped and contoured specifically to clean rims and spokes with ease. Its unique design features an impact-resistant, dual density handle and durable nylon bristles.

Our Two Prong Brush is ideal for reaching hard-to-shift dirt on spokes, discs, shocks, cranks, linkages and pedals. It’s design features a tough, impact resistant handle that won't slip in extreme conditions and durable nylon bristles. The twin brush heads can be altered and repositioned to reach the tightest of areas.

To maintain performance of all brushes avoid use with boiling water and on hot parts. We recommend using warm water and allowing all hot parts to cool before use.

INCLUDED

• Soft Washing Brush
• Detailing Brush
• Claw Brush
• Wheel & Component Brush
• Two Prong Brush

1000 XLCH Patch

Can easily be ironed or sewn on.

NOTE: When using an electric iron to apply the patches to clothing, NEVER use steam. Patch may be sewn on after being attached with it's adhesive.

• L3" x W1.26"

Peanut Tank 2.0 Gallon - Deep Tunnel

Hap Jones 2 peanut gas tank includes a die-cast gas cap and features front and rear tabs welded in place.

Accepts 1/4" National Pipe Thread petcock. *NOTE: Features a deep tunnel. *NOTE: For use with bayonet type die cast scalloped gas cap, early chopper cap we have offered since 1983! *NOTE: Builder must drill a 5/16" hole in each tab for mounting.

GA2100-7A

T-152 Toolbox - Military Green

 Made in Japan, this incredibly lightweight and durable Toyo Steel Flat Top Toolbox T-Type 152 is 154mm in length, and 105mm in width. The box features a clipped enclosure for the safekeeping of essentials. Small feet appear at the bottom of the Toyo Steel Flat Top Toolbox T-Type 152 to keep it raised above surfaces, while indents at the top allow for safe stacking.

• • Dimensions: 154mm x 105mm x 29mm; 0.15 g
  • Seamless wringing toolbox
  • Durable and functional, lightweight and easy to hold
  • STackable
  • Lightweight and Portable

Made In Japan

Pro Series Gold MX Lite Foot Pegs

TC Bros. Pro Series MX Lite Foot Pegs were designed with the high performance Harley Davidson rider in mind. Inspired by the off-road racing world and refined for the ultimate on-road experience, these pegs provide a high traction and stability. Precision machined right here in the USA from the highest quality materials, these foot pegs are extremely strong and lightweight. Providing 360 degree adjustability and a design that increases the lean angle of your motorcycle, the attention to detail on these is second to none. 

Features:

• Exclusive taper locking foot peg mounts hold securely without slippage, yet are 360 degree adjustable to provide a perfect angle to fit your bike and foot. 
• CNC machined from strong and lightweight 6061-T6 aircraft grade aluminum. 
• Replaceable stainless steel cleats will not rust and are specifically machined to provide the proper amount of traction for motorcycle footwear.
• 3.375" long x 1.375" wide surface provides excellent stability without sacrificing lean angle. 
• Black anodized finish for great looks and corrosion resistance (other finishes available). 
  
• Proudly made in the USA.
• Pegs install using basic hand tools.
• Replacement parts and tech support after the sale.

Fitment

• Kit includes 3/8" male style foot peg mounts that fit many popular 1984-newer Harley Davidson models including Dyna, FXR, Softail (excluding 2018-newer), and Sportster models (excluding 2011-newer XL1200C "Custom", XL1200CP "Custom Program", and XL1200X "Forty Eight", 2012-newer XL1200V "Seventy Two, 2016-newer XL1200CX "Roadster, 2018-newer XL1200XS "Forty Eight Special", and all water cooled "Revolution Max" engine models).
• Does not fit Pan America models.
• More fitments are available in other kits. 

mo.rear

Handlebar Grip Ring - Black

Handlebar grip ring fit all 1” handlebar, available in aluminum in polish or black anodized finish, and in brass in polish or chrome finish, the external diameter is 36mm.

Handlebar Grip Ring - Chrome

Handlebar grip ring fit all 1” handlebar, available in aluminum in polish or black anodized finish, and in brass in polish or chrome finish, the external diameter is 36mm.

mo.switch basic LED 2-button

Hardware Kit - Gold

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in anodized colours so you can fine-tune the look of your lid.  

Mohawk Long Rear Fender - Fits Rear Tires 150 - 180

The TJBC Mohawk Long Rear Fender for Rear Tires is great for getting that bobber or chopper rear-end look for your Motorcycle! Hand spun from 13 ga steel, this is a fender built to last! These hand-made fenders fit a 150-180 tire, depending on the brands tire profile, the fit may be more snug than others.

Dimensions:

• Approx 43" Long measured along the spine of the fender
• Approx 7.5" wide
• Fits Rear Tires 150-180

This fender does not include any hardware.

These rear fenders require some fabrication to mount as they do not have any holes pre-drilled, so break out the welder and hood!
These are approx. 7.5" wide and 43" long and when mounted to a stock frame they extend a few inches past 12 o'clock on your wheel.
They fit the rear wheel like a glove and are strong enough to carry a passenger.

The easiest way to set these up on a Honda Shadow VT600 that has been hard-tailed if you are going to make your own struts with the TJBC DIY Builders Motorcycle Fender Strut Kit  Lay a length of bike chain or thick tubing, down the center of your tire to set fender height. You can use angle brackets welded to the swing arm or our Pressio fender mounting kit. Drill holes in fender to bolt fender to angle brackets or Pressio kit. Drill 5/16' hole in axle plate. Tap with 3/8-16" tap. Bullet bungs get welded to top of struts and countersunk bungs get welded to bottom of the struts (cut struts to desired length). Cap head bolt goes into countersunk bung into axle plate and bullet bung gets bolted to fender from inside fender.

Complete Mono Strut Kit for Honda Shadow VT600 VLX 1988 - 2007

The Complete Mono Strut Kit for Honda Shadow VT600 VLX 1988 - 2007

FITS:

• Honda Shadow VT600, VLX, Steed 1988 - 2007 

 INCLUDES:

• Hardtail Mono Strut - Fits Honda Shadow VT600 VLX 1988 - 2007
• Bolt On Battery Box - Honda Shadow VT600 VLX - Fits 8 Cell Antigravity Battery
• Mono Strut Electronics Tank - Bolt on E-Tank for Honda Shadow VT600 VLX 

The Complete Mono Strut Kit for Honda Shadow VT600 is the perfect Honda Shadow Suspension alternative to a hardtail. This kit gives you the shortcut to removing your Honda Shadow Mono-Shock and replacing it with a low-profile mono strut while at the same time, giving you the confidence that all of your electrical housing and battery will still fit. 

Avoid the hassle of returns, hours of trial and error and praying to the Honda Shadow Strut Gods, that everything fits. Just get the Complete Mono Strut Kit for Honda Shadow VT600 VLX, and rest assured, everything will fit perfectly while allowing you to remove the many stock eyesores under your seat. 

Velocity Stack for VT600 and VT750 - Single Carb - Polished Aluminum

Everyone loves velocity stacks! They allow your motor to inhale better and they are sexy as hell!

Fits Honda Shadow VT600 and VT750 and Kawasaki Vulcan VN800:

• Honda Shadow VT600/VLX600 1999 - 2007
• Honda Shadow VT750 Spirit Single Carb Models VT750C2/F 2007 - 2010
  
• Non-EFI Honda Aero VT750 2004-2009
• Kawasaki Vulcan VN800 1995 - 2005

If you remove the airbox on your Honda Chop with a single carb, the carb will have a hard time creating enough negative vacuum and the air will be far too turbulent in the venturi to pull in a steady flow of fuel from the pilot and main jet, the solution to this issue? Velocity Stacks! This allows the carb throat to be lengthened enough so that the engine can maintain vacuum beyond the slide of each carb, as well as allow the air turbulence to be reduced, resulting in a much smoother delivery of air and fuel to your engine.

These WILL NOT fit any dual carb model bikes. 

Includes: 

• One Single Carb Velocity Stack
• One Filtration Screen
• 3 Stainless #6-32 Set Screws
• Allen Key for Set Screws

You will need to purchase a performance jet kit with your stack to achieve the desired results. The kits you find online will not work with these!

WITH PROPER TUNING, THESE WILL NOT HARM YOUR BIKE, NOR WILL THEY ALLOW ANYTHING HARMFUL INTO YOUR MOTOR! 

Please Note: These are not a plug-and-play item. You will need to re-jet and tune your carbs. We also suggest using some loc-tite on the threads. These will not fit dual-carb models

Complete Hardtail Kit for Honda Shadow VT750 ACE 1998 - 2003

This Hardtail Kit for Honda Shadow VT750 ACE 1998 - 2003 from TJ Brutal Customs is a complete package for converting your Honda Shadow into a hard tailed street machine!

FITS:

• Honda Shadow VT750 ACE 1998 - 2003

Includes:

• Rigid Lowering Struts for Honda Shadow VT750 and VT1100
• Bolt-On Battery Box - VT750 ACE - Fits 8 Cell Antigravity Battery AG801
• Electronics Tank - Bolt-on E Tank for VT750 ACE

This kit will allow you to hard tail your Honda Shadow frame and give you all the necessary components to relocate your electronics for a clean and simple under-seat space. 

Bolt-on Sissy Bar Kit

Fits: 

• 2010-2023 Honda Shadow Phantom VT750C2B
• 2007-2014 Honda Shadow Spirit VT750C2/C2F/C2S

QUAD LOCK MOTORCYCLE USB CHARGER

Keep your phone charged while you ride with the Quad Lock® Motorcycle USB Charger.

EASY INSTALLATION
Seamlessly integrate the Motorcycle USB Charger with any Quad Lock® Motorcycle Mount or 1" Ball Adaptor.

The Charger is neatly positioned under the Quad Lock® mount head to provide USB power without the need for long charging cables.

The 1.5m SAE connection cable and 20cm SAE to battery ring terminals give you the option to connect directly to your Battery Terminal or existing SAE Port. The charger draws zero current when not in use so there is no danger of draining your battery.

FAST CHARGING & SURGE PROTECTION
The Quad Lock® Motorcycle USB Charger supports Quick Charge 2.0 for Fast Charging. With integrated surge and polarity protection to keep your device safe from human error (also known as wrong installation).

IP66 WATER RESISTANT RATING
Unless you're taking your bike under water (which we don't recommend), the IP66 water resistant rating means there is no need for a cap to cover the USB port, no matter how heavy the rain.

Device specific charging cable and mount not included

WHAT'S INCLUDED

• Quad Lock® Motorcycle USB Charger
• 1.5m SAE connection cable and 20cm SAE to battery ring terminals

SPECS

• IP66 Water resistant housing
• IPX8 Water proof USB socket. No need for a plug.
• Quick Charge 2.0 (5V-2A, 9V-1.67A, 12V-1.5A)
• The input voltage requirement for the Moto USB is 12V - 24V DC
• Inbuilt Self Healing Poly Fuse and Surge Protection
• Polarity Protection (Prevents damage if incorrectly installed)
• 1.5m cable to SAE connector and 20cm SAE to battery ring terminals

BELL MX-9 ADVENTURE SHIELD - HI-DEF YELLOW

 We've got your adventures covered regardless of the conditions that day or night might throw at you. 

AGV K6 / K6 S Iridium Blue Mirror Visor

The AGV Iridium Blue is a mirror-coated replacement visor for the AGV K6 and K6 S helmets. The iridium mirror coating reduces glare and reflected light in bright, high-sun conditions — making it the go-to choice for sunny day rides, open highway riding, and any situation where a standard tinted visor isn’t enough.

The blue mirror finish provides a distinctive look while the scratch-resistant coating ensures long-term optical clarity. Compatible with the Max Pinlock® 120 anti-fog lens system (lens not included — sold separately).

Key Specifications

• Lens type: Iridium blue mirror coating — anti-glare, tinted.
• Scratch-resistant coating for long-term durability.
• Max Pinlock® 120 ready — inner pins accept the Pinlock anti-fog lens insert (not included).
• Field of view: 190° horizontal / 85° vertical — matches the K6 S full eye port.
• Best for: Bright sunlight, high-glare conditions, open road riding.

Compatibility

• AGV K6
• AGV K6 S

Not compatible with other AGV helmet models.

Complete Your Setup

Add the AGV K6 S MAXI Pinlock 120 Anti-Fog Lens to this visor for fog-free performance in cold or wet conditions. Or, if you want a single visor that adapts to all light conditions automatically, consider the AGV K6 S Adaptive Photochromic Visor.