33 Ford Replica Tail Light Polished Stainless Steel

TC Bros. 12V Ford Replica Tail Light with polished stainless housing and red glass lens. Light features both a brake/running light as well as a License plate light to illuminate your plate at night. The two wire hook-up for the brake and tail lights mean this light is self grounding through its housing. The black wire is the 12V positive running light hookup. The green wire is the 12V positive brake light hookup. This light uses a standard incandescent automotive 1157 bulb (included). These lights measure 3 3/4" in diameter, 2 1/4" deep. The mounting studs are 1 3/4" center to center. Great light for your old school bobber or chopper! Note: For best results on high-vibration applications, isolate the tail light mount with rubber grommets 

Ford "Stop" Duolamp Model A Stainless Steel Tail Light

TC Bros. Polished stainless steel 12V Ford "STOP" Duolamp reproduction tail light with red glass lens. Light features both a brake/running light as well as a License plate light to illuminate your plate at night. The two wire hook-up for the brake and tail lights mean this light is self grounding through its housing. The black wire is the 12V positive running light hookup. The green wire is the 12V positive brake light hookup. Light features standard automotive style bulbs (#1156 for Brake Light, and #67 miniature for Running Light). Replacement bulbs are easily sourced from local autoparts stores should you ever require. These lights measure 3 3/4" in diameter, 2 1/4" deep. The mounting studs are 1 3/4" center to center. Great light for your old school bobber or chopper! Note: For best results on high-vibration applications, isolate the tail light mount with rubber grommets.

Micro Switch designed for the Brembo RCS Brake Master Cylinder, featuring dual functionality with both Normally Open and Normally Closed functions. Required for motorcycles equipped with an OEM Normally Open Brake Switch, such as the 2018-2024 Softails. 

Required when installing a Brembo Radial RCS Brake Master Cylinder for 1" Handlebars

Features

• IP Rating: IP 67


• Dual switch function: Normally Open (NO) and Normally Closed (NC)


• Soldering/Crimping will be required

Fitment

• Fits Brembo Radial RCS Brake Master Cylinder for 1" Handlebars


• Required when installing a Brembo RCS Master Cylinder on 2018-2024 M8 Softail, 2012-2017 Dynas & 2014-2022 Sportsters 


• Will not fit 2013 to present Touring models (FL)

Installation

Click here for installation instructions

You can now customize your OG Risers with our Carbon Fiber Wires Bracket. CNC cut in 100% Carbon 3K Twill Fiber. Bringing the V-Twin Riser game to another level. Available for all riser heights.

The OG H9/H11 to H4 LED headlight adapter is the simplest way to convert your recent Harley-Davidson H9/H11 factory connectors into a female H4 plug. Easy to install and plug-n-play! 

Fitment

Our LED Load Equalizer works great in custom applications where OEM turn signals have been removed and replaced with low-draw LED Lighting like our LED Tail Light with integrated blinkers & OG X-series LED Turn signals. It will solve LED related turn signal light issues such as hyper flashing and bulb out error code.

Features

• Waterproof - Sealed in Epoxy


• Includes all connectors - Plug and play

Fitment

Sportster (6 Pins Connectors):  

-2004-2013 XL Models

-2010 Softail Convertible

Standard Harleys (8 Pins Connectors)

-1996-2010 Softail (Except Rocker)

-1997-2011 Dyna 

-1999-2003 Sportster

-2011-2013 Road Glide Ultra

-2010-2013 TriGlide

-1997-2013 Touring (Except 2010-2013 FLHX, 2010-2013 FLTRX, 2010-2012 FLHXSE2, 2012-2013 FLTRXSE, 2013 FLHRSE5, 2013 FXSBSE)

Please contact us @ info@originalgaragemoto.com if you need more information on our load equalizer fitment or to get a quote for a custom unit.

TC Bros. 2 Inch Round Bobber Side Mount Tail Light/License Plate Bracket

TC Bros. "Stop" Side Mount License Plate/Tail Light Bracket (tail light included). Our unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut mounting holes in the bracket.

We also include two different mounting brackets so you can either bolt this bracket to your axle or weld the included raw steel slug anywhere on your frame and clamp it to that. The axle mount hole is .787" diameter so this can be used on Harleys with 3/4" axles and Metric bikes with 20mm axles.

This is the most versatile bracket on the market! Your mounting options and license plate positions can be mixed and matched to give you the unique look that you are going for. Also included in the kit is the 12 Volt Stop Brake/Tail Lamp (With License Plate Light featuring automotive style bulbs) Round Style as used on early bobbers. Two wire hook-up means the light is self grounding (wiring not included with light).

The bracket is powdercoated gloss black and comes with stainless steel button head bolts/nuts. All steel brackets are made in the USA.

Highsider Apollo LED Turn Signals - Smoke

The Highsider Apollo Turn Signal Modules are perfect for custom mounting or molding. The Apollo modules feature a black aluminum ring with smoked lenses and an 8 mm mounting stud. With this innovative lighting technology, two very bright amber SMD LEDs are installed in the center, enabling an extremely small design.

The outer ring, on the other hand, consists of the new COB technology (Chip On Board). Thanks to the new LED chip embedding for high-power LEDs, high light output can be achieved with currently the best possible efficiency and service life. This also allows higher light values to be achieved than with conventional LEDs. E-approved. For use as front or rear turn signal. Sold as a pair.

Details:

• 2 very bright amber SMD LEDs are installed in the center
• The outer ring consists of the new COB technology (Chip on Board)
• The unit can be installed flat without the aluminum ring, leaving only the lens visible. This requires drilling a 20 mm hole
• Alternatively, the unit can be mounted with the aluminum ring on a retaining plate
• For use as front or rear turn signal
• E-approved

Dimensions:

• Depth: 0.5" (13 mm)
• Housing Depth: 0.35" (9 mm)
• Lens Diameter: 0.87" (22 mm)
• Housing Diameter: 0.79" (20 mm)
• Threaded Bolt: M8 x 0.47" (12 mm)

XP-1 Micro-Start (Gen 2)

The Micro-Start XP-1 has an ALL-NEW design! The second generation XP-1 is upgraded with super fast USB-C PD30w Charging and other great features. The XP-1 was one of the first mini lithium jump-starters on the market and is considered the industry standard in its class

• Jump-Start cars, trucks, motorcycles, powersports vehicles, more
• Charge Phones, Tablets, Laptops and other USB devices (Apple or Windows)
• Type-C USB IN/OUT and Type A QC USB Out
• Type-C PD 30w Super Fast Charging (2 hr recharge)
• 400A starting current / 2000A peak
• 12,000 mAh capacity (44.4 Wh)
• LED Flashlight built-in
• 6.9 x 3.7 x 1.4 inches (176x95x35 mm)
• Carry Case and Accessories included

The next generation MICRO-START XP-1 is here! Our XP-1 jump-starter/ personal power supply (PPS) was Winner of the SEMA New Products Award in 2013 – it was the First and ORIGINAL mini jump box and continues to evolve. Now we have raised the bar bigtime with a NEW sleek design, higher jump-starting Power, and great features like a large Digital Display plus the new and super fast PD 30w USB Type-C Charging/Recharging so the XP-1 can power or fast charge all your modern Electronics like Phones, Tablets and Laptops. Take Portable Power and the ability to Jump Start your vehicles wherever you go. Take us on your next adventure!

mo.rear

Elypse LED 2-1 Universal Turn Signals

Features and Benefits:

• 2-1, White Run Light and Full Contrast Amber Turn Signal. Super small, amazingly bright with smoked lenses
• Engineered in Germany with SMD-LED technology
• The housing is CNC machined from billet aluminum and available in black or chrome finish
• Some applications may require the use of a load equalizer
• Sold in pairs!

Fitment:

• Custom-fit on hydraulics clutch controls models.
• Custom-fit for most 12 Volt models

Momentary Switch Converter

NAMZ Momentary Switch Converter, (Intended for custom applications where momentary switches are used for a HIGH/LOW headlight switch and RUN/KILL switch.) Our module converts the momentary switch into a HIGH/LOW latching and an ON/OFF latching for a run switch. Simply add fused power, a ground wire and connect your momentary switches through the NSC-01 for the latching functions you need!

• Converts momentary switch to hi/low for headlight
• Converts momentary switch to latching on/off for kill switch
• The industry “originals” since 1990!
• LIFETIME WARRANTY!

AKRON LED Bar End Turn Signals

The Highsider Akron-Flash LED Bar End Turn Signals are the perfect solution to relocate turn signals or add additional visibility. The amber LED light has a horizontal adjustment of up to 26 degrees to place the light where you need it most. CNC machined aluminum housing and paired with a smoked lens. Pre-wired 40″ wire leads ensure adequate length for internal handlebar wiring. Universal for 7/8″ and 1″ Handlebars. E-approved. Offered in black or titan surface finishes.  

Dimensions: Width: 1.41″ (36mm) Diameter: 1.35″ (34.5mm) Cable length: approx. 40″ (1000mm) The angle of the light modules can be adjusted by 26°.

Connections: Power consumption: Power consumption: 13.5 V, 0.26 A, 3.5W Yellow cable = turn signal (+) Black cable = ground (-)

Scope of delivery: 1 pair 

Note: Not for use as a bar end mirror mount.

Type 8 7" Adaptive LED Headlight With Housing

The Highsider Type 8 Adaptive 7″ LED Headlight is the perfect way to improve visibility at all times. The Type 8 headlight also features a unique built-in halo running light. The headlight is pre-installed into a classic headlight bucket and includes a secure mounting bracket for easy mounting. Thanks to advances made with modern LED lighting technology, forward visibility will no longer be an issue. Tilt-activated adaptive cornering lights offer clear advantages over a conventional headlight. The cornering light activates when the motorcycle is leaned over in corners to better improve road illumination. Two ellipsoidal lenses in combination with powerful LEDs turn night into day. The headlight is available with a chrome or black finish. E-approved & DOT compliant. 

Dimensions:
Diameter: 8.66″ (220 mm)  Depth: 6.10″ (155 mm)  Distance mounting holes -Distance of mounting holes on bracket (center to center): 2.55″ (65 mm) Headlight insert Ø: 7″ (178 mm)  Bottom mounting

Connections:
Power input: 3-pin Connector:
Red wire = low beam (+)
White wire = high beam (+)
Black wire = ground (-)
Separate wire (round connector):
Red cable = LED position light (+)

Scope of delivery: 1 headlight and housing 

USB 0-108 V2

• Low input (12.3V) auto-off protects vehicle battery from total discharge. Supply range: 12.3 to 16Vdc
• 12V power through an industry standard SAE 2-pin connector
• Short circuit, overheat, over-voltage protection
• Apple 1A charge confirmation ‘handshake’ built in

Push Button Off-(On) Starter Switches

These high-quality momentary push buttons can be used for all sorts of things, but a popular choice is to use these to move your start button off of your handlebars. The screw terminals make these an easy install. They do require a 0.750" hole to install. 

Bolt-On Battery Box - Honda Shadow VT600 VLX - Fits 8 Cell Antigravity Battery

This bolt-on battery box for the AG801 small case 8 cell Antigravity battery is the perfect fit for your Honda Shadow bobber build! You can bolt these on anywhere they will fit on your bike! Made of .125" (1/8") thick steel, this battery box is built for a long life. Two drain holes in the bottom ensure that any moisture that's collected can get out. I know many of you Shadow owners don't have access to a welder, but almost anyone can get their hands on a simple drill and some bolts!

Specs:

• 1.25" thick mild steel 
• Approx 4.5" Length x 2.5" Width x 3.75" Height
• 3/8" mounting holes
• drain holes

This battery box will work great if you are getting rid of all your stock electronics and using one of the TJ Brutal Bolt-on E Tanks!! The battery box easily bolts in by drilling 2 holes in the forward tube of your swingarm, all the way towards the right side of the bike, away from the chain. Then attaching the box with 2X 3/8"-16 bolts. Be sure to use loc-tite or locking agent on the threads. 

This fits a Honda VLX VT600 88-07 but may fit other bikes. For other bikes, you would need to check the specs for fitment compatibility.

Antigravity 8-Cell Battery Box Approx- 4.5" Length x 2.5" Width x 3.75" Height approx (to the top of the terminals). This box is for the Antigravity 8-cell small case batteries, not for OEM batteries.

FnA 3.25" LED Pancake Headlight

This 3.25" headlight is manufactured by our friends from FnA.

Details are as follows:

• Uses a 2000 lumen LED
• Works with 12V systems
• Waterproof
• Made from 6061 Aluminum and polished for mirror like finish
• Uses a one wire hook up for one brightness
• These are not DOT approved

Replica Spot Lamp Switch

This is a Replica spot lamp switch set for 1938-1963 spot lamp units.

• Set of 2
• Fits: EL 1938-1940 FL 1941-1963

SILVER series: 8-step 6V 4A / 12V 3A sealed battery saving charger & maintainer

OptiMate 5 6V/12V the smarter charger for all 6V and 12V lead-acid batteries – great for deep cycle batteries!

Fully automatic multi-step program brings the battery safely to full charge – Connect to the battery and OptiMate 5 6V/12V does the rest, no supervision required!

MORE FEATURES:

Automatically adjusts current to match battery size and condition.

Safe to leave connected. Full electronic protection.

Maintains battery at full charge and good health.

Saves your ‘dead’ battery from as low as 0.5V.

Tests battery state of health.

Voltage safety check: will not charge if battery voltage does not match selection. Requires user confirmation.

Energy saving technology. √ Stand-by power less than 0.5W. √ Efficient 24-7 battery maintenance.

Weatherproof. Rated for use down to -40°C / -40°

IDEAL FOR: STD, AGM, GEL, SLI & DEEP CYCLE 6 & 12V batteries from 3 – 120Ah (up to 160Ah for 6V).

CHARGING AMPS: 4A (6V) / 3A (12V) (Ampmatic)

CHARGING VOLTS: 6V range: 0.5V – 7.2V; 12V range: 8V (0.5V*) – 14.4V

*Voltage safety check. Will not charge if battery voltage does not match selected voltage. User must confirm it is a low volt 12V battery > press selection button for 3 seconds to confirm > then lowest charge voltage for 12V is reduced to 0.5V.

OPERATION: Selectable

STEPS: 8

FEATURES: SAVE & CHARGE all 6V & 12V lead-acid batteries.

USE: Indoor / Outdoor  (lowest temperature: -40°F / -40°C).

INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).

STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.

SAVE : Low Volt Start of 0.5V + 2 step desulphation recovery.

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

INCLUDED: weatherproof battery lead & battery clip set.

WARRANTY: 3-year limited replacement warranty.