All

Air Cleaner/Carb Support Bracket For 89-99 EVO Big Twin CV

TC Bros Air Cleaner/Carb Support Bracket for Harley Davidson Evolution (Evo) Big Twin Engines. This bracket fits all 1989-1999 CV carburetor models including Dyna, Softail, FXR, and Touring. This will not fit 1995-2001 HD Big Twin models equipped with Magneti Marelli fuel injection units using dual bore throttle bodies.

"Super Prism" Throttle Lock

• Includes thumb screw and spring
• Screws right into the "Super Prism" Throttle

Perth County Moto X Savage Customs Sporty Tank

It's the collab you've been waiting for! PCM and Savage Customs have partnered to bring you this piece of art. Our good pal Jamie, over at Savage Customs, has been mixing up Kandy paints and metal flakes. He's laid down this one-off original paint job on a Sporty-style frisco tank. Bolt this onto your current bike to take it up a notch or use this as your starting point for a new project!

What the hell did Jamie do!? 

He went to town as he always does! The tank is black with panels of deep orange/red Kandy with a textured effect. It has pearly peach designs and is trimmed with silver flake pin stripping. The tank has an official collab badge painted in peach at the back. As always, Jamie has finished it all off with a polish that makes the paint look as deep as the Mariana Trench! 

There is only one of these sweet ladies in existence so don't waste too much time thinking about it!!

About the tank

• Low tunnel tank
• 2.4 Gallon
• Mounts easily with front and rear tabs (custom mounting required)
• Has a 3/8" NPT petcock bung on the left side and two 1/4" NPT petcock bungs at rear
• Uses 1982/later screw-in vented gas cap (not included) 
• We always suggest lining a new tank as cheap insurance. The Kreem Lining Kit works great!
• This Universal Mounting Kit makes it easy to install

Rolling Chaos Wooden Illustration Panel

FREE PIN WITH ROLLING CHAOS PURCHASE

Limited Edition.  The perfect gift for you or someone else!  These illustrations are done on solid wood panels that will look great around the house, office, or shop.

8" X 10"

Rolling Chaos Wooden Illustration Panel

FREE PIN WITH ROLLING CHAOS PURCHASE

Limited Edition.  The perfect gift for you or someone else!  These illustrations are done on solid wood panels that will look great around the house, office, or shop.

8" X 10"

Bolt-On Battery Box - Honda Shadow VT600 VLX - Fits 8 Cell Antigravity Battery

This bolt-on battery box for the AG801 small case 8 cell Antigravity battery is the perfect fit for your Honda Shadow bobber build! You can bolt these on anywhere they will fit on your bike! Made of .125" (1/8") thick steel, this battery box is built for a long life. Two drain holes in the bottom ensure that any moisture that's collected can get out. I know many of you Shadow owners don't have access to a welder, but almost anyone can get their hands on a simple drill and some bolts!

Specs:

• 1.25" thick mild steel 
• Approx 4.5" Length x 2.5" Width x 3.75" Height
• 3/8" mounting holes
• drain holes

This battery box will work great if you are getting rid of all your stock electronics and using one of the TJ Brutal Bolt-on E Tanks!! The battery box easily bolts in by drilling 2 holes in the forward tube of your swingarm, all the way towards the right side of the bike, away from the chain. Then attaching the box with 2X 3/8"-16 bolts. Be sure to use loc-tite or locking agent on the threads. 

This fits a Honda VLX VT600 88-07 but may fit other bikes. For other bikes, you would need to check the specs for fitment compatibility.

Antigravity 8-Cell Battery Box Approx- 4.5" Length x 2.5" Width x 3.75" Height approx (to the top of the terminals). This box is for the Antigravity 8-cell small case batteries, not for OEM batteries.

The Acerus - Single Cable Throttle Assembly For Honda Shadow - Brass

The Acerus single cable throttle assembly for the Honda Shadows is machined from billet aluminum and made to work seamlessly with the stock Honda Shadow throttle pull cable.  That's right! You do not need to run a push cable!  The stock throttle assembly is quite bulky and lacks any kind of visual aesthetic. Who are we kidding, it's totally haggard! Many folks wish to clean up their bikes' cockpit by removing the stock assembly, relocating their switches, (videos HERE) getting rid of the push cable,https://youtu.be/zXaumYHMutE and going to a single pull cable (videos HERE).

Specs:

• Machined from 6061A Aluminum
• Fits 1" handlebars 
• Stainless #8-32 bolts (req. 9/64 allen)
• Threaded for Honda throttle pull cables ONLY

The Acerus allows you to maintain a clean, focused, and custom look on your bars with no unnecessary fluff, but enough style to show you have superb taste. because you definitely do, you got-dang champion! 

Fits the following models throttle cables -
Honda Rebel
Honda Shadow VLX600 / VT600
Honda Shadow VT750, ACE, Aero, Spirit, Phantom, RS
Honda Sabre
Honda Magna
Honda VT1100
Honda VTX
*May fit other metric bikes.
* Some models' stock throttle sleeves may not fit.  

For a perfect fit, it is recommended to pair this with the Malleus Machined Gripset!
Do not over tighten clamp bolts. Use red Loctite on the bolts. Fits 1" bars, will accommodate most grips for 1-inch bars. When clamping the assembly on your bars, a small gap between the upper and lower halves is normal, this ensures that the clamp isn't bottomed out before it can adequately clamp the bars. This allows the clamp to work well on raw material bars or bars that have plating or powder coating. When installing on powder-coated bars, it may be necessary to use a mallet to tap the halves of the assembly together so the bolts can grab the threads. Powder coating isn't an exact science and the thickness can vary from brand to brand, there is no way to anticipate this and if we made the clamps ID bigger, it wouldn't fit chromed bars.  
We advise using a bit of lubricant inside the throttle assembly and under the throttle sleeve for smooth twist action and prolonged life of the parts.  

Burly Brand Tank Bag - Dark Oak

The Burly Brand Tank/Tail Bag is available in Black CORDURA® and the original Dark Oak Wet Waxed UV-treated cotton canvas that will age and show character over time. It has an easy-on, easy-off magnetic system reinforced with safety securing D-ring anchor points for mounting. If you’re riding solo or simply want the bag out of the way, it’s equally at home on the tail and includes a tail mounting accessory flange that clips and cinches down on the back of your seat. It also includes a convenient magnetic removable map/accessory screen that sticks either directly to the bag lid or directly to the tank. The map screen is designed with an innovative stretch screen design to hold any variety of smartphones, small tablets, and even some GPS units. The bag features two exterior zipper pockets, leather securing straps, and a generous interior space with interior elastic sides. The bag also has a pass-thru port for motorcycle charging accessories so you can keep your smartphone, tablet, or go-pro powered up on a long ride. Park your bike and take the bag with you in seconds using the convenient carry handle; either directly off the tank or via the 4 high-quality “moto centric” speed buckles that are part of the bag’s “Anti Flail Snap System” on the tail.

• Easy on, easy off magnetic system
• Reinforced safety securing D-ring anchor points for mounting
• Magnetic removable map/accessory screen
• Hold any variety of smartphones, small tablets, and even some GPS unit
• The bag features two exterior zipper pockets,
• leather securing straps,
• Pass-thru port for motorcycle charging accessories
• “Moto Centric” speed buckles
• “Anti Flail Snap System”

Burly Brand Tank Bag - Black

The Burly Brand Tank/Tail Bag is available in Black CORDURA® and the original Dark Oak Wet Waxed UV-treated cotton canvas that will age and show character over time. It has an easy-on, easy-off magnetic system reinforced with safety securing D-ring anchor points for mounting. If you’re riding solo or simply want the bag out of the way, it’s equally at home on the tail and includes a tail mounting accessory flange that clips and cinches down on the back of your seat. It also includes a convenient magnetic removable map/accessory screen that sticks either directly to the bag lid or directly to the tank. The map screen is designed with an innovative stretch screen design to hold any variety of smartphones, small tablets, and even some GPS units. The bag features two exterior zipper pockets, leather securing straps, and a generous interior space with interior elastic sides. The bag also has a pass-thru port for motorcycle charging accessories so you can keep your smartphone, tablet, or go-pro powered up on a long ride. Park your bike and take the bag with you in seconds using the convenient carry handle; either directly off the tank or via the 4 high-quality “moto centric” speed buckles that are part of the bag’s “Anti Flail Snap System” on the tail.

• Easy on, easy off magnetic system
• Reinforced safety securing D-ring anchor points for mounting
• Magnetic removable map/accessory screen
• Hold any variety of smartphones, small tablets, and even some GPS unit
• The bag features two exterior zipper pockets,
• leather securing straps,
• Pass-thru port for motorcycle charging accessories
• “Moto Centric” speed buckles
• “Anti Flail Snap System”

FnA 3.25" LED Pancake Headlight

This 3.25" headlight is manufactured by our friends from FnA.

Details are as follows:

• Uses a 2000 lumen LED
• Works with 12V systems
• Waterproof
• Made from 6061 Aluminum and polished for mirror like finish
• Uses a one wire hook up for one brightness
• These are not DOT approved

US-40 Drypack

The latest addition to the universal-fit US-Drypack range, the US-40 is a double-entry, flexible storage version with all the same highly durable features plus much more.

The waterproof carrying capacity is variable from 28 to 40 litres. Set to 40 litres, the pack is perfect storage for a tent, roll mat, or sleeping bag coupled with a separate tunnel for tent poles making it an excellent moto-camping set-up. Alternatively, roll up both ends to reduce the capacity to 28 litres, ideal for waterproofs and warmer clothing on a shorter ride.

The new long hook straps and hook-back system enable the pack to be mounted directly to a tail rack or other structural parts on the bike. No rack, no problem. As with all US-Drypacks, the US-40 can securely mount across a pillion seat with the subframe loops included.

Hypalon reinforced strap mounts and webbing loops provide robust mounting locations for additional US-Drypacks, OS-Packs or Accessories. Also included is an adjustable shoulder strap for hands-free carrying to and from the bike.

FEATURES

• Double-ended waterproof roll-top closure main compartment.

• Universal-fit to any type of motorcycle.

• Mount across a seat or rear rack

• Super-tough Hypalon + 420D Cordura® Lite construction

• Heavy-duty roll-top shields

• Hypalon reinforced strap mounts

• Separate tent pole tunnel (up to 50cm)

• Removable internal white liner (taped-seams)

• Carry on or off the bike as a shoulder bag with the removable shoulder strap included.

• 10 YEAR GUARANTEE

Magnetic Bolt Tray

That dreaded ting sound of dropping a washer. Never to be found again. . . There is a simple solution! A magnetic tray holds all of your parts so that they don't run away from you while you're working. 

• 6" magnetic stainless steel tray with a rubber-coated base to protect work surface
• Holds metal items such as nuts, bolts, washers, etc
• Can be used horizontally, vertically and upsidedown

Waterproof Heat Shrink Tube Set

Stop taping those wires together and make your life easier!

• Provides excellent protection and insolation of components and wires
• The waterproof, adhesive-lined inner wall seals, preventing moisture from entering
• Quick and easy to shrink with heat gun 
• Operating temperature -45C to 125C

Pill Style Chopper Oil Tank

TC Bros 5" Round Pill Style Oil Tank Universal Fit.

Dimensions: 10"L x 5"OD. Just under 3-quart oil capacity.

100% TIG welded from mild steel.

Pressure tested to ensure quality, leak-free performance. Includes CNC machined knurled aluminum cap (thread size 1-5/16-12tpi). CNC machined bungs (QTY:3) are 1/4" NPT for easy plumbing of oil lines. 

Proudly Made in the USA.

You can find the mounting kit here

Replica Spot Lamp Switch

This is a Replica spot lamp switch set for 1938-1963 spot lamp units.

• Set of 2
• Fits: EL 1938-1940 FL 1941-1963

Bat Skull Necklace - Silver

Cast from a real bat skull, this fantastically detailed skull is remarkably life-like with a subtle organic texture that almost makes it look like real bone. We added a lunar phase motif onto the forehead to ramp up the gothic vibes.

Handmade from white bronze & tarnish resistant h: 37mm x w: 18mm on 24" chain 

Lost Apostle is a Canadian company that was founded in 2007. From Lost Apostle - Re-invigorating a 6,000-year-old casting method called the lost-wax process, each handcrafted piece of Lost Apostle jewelry is a small sculpture in itself. We pride ourselves on craftsmanship, design, and attention to detail in a continually evolving line of jewelry for the discerning renegade, rebel, and rogue.

SILVER series: 8-step 6V 4A / 12V 3A sealed battery saving charger & maintainer

OptiMate 5 6V/12V the smarter charger for all 6V and 12V lead-acid batteries – great for deep cycle batteries!

Fully automatic multi-step program brings the battery safely to full charge – Connect to the battery and OptiMate 5 6V/12V does the rest, no supervision required!

MORE FEATURES:

Automatically adjusts current to match battery size and condition.

Safe to leave connected. Full electronic protection.

Maintains battery at full charge and good health.

Saves your ‘dead’ battery from as low as 0.5V.

Tests battery state of health.

Voltage safety check: will not charge if battery voltage does not match selection. Requires user confirmation.

Energy saving technology. √ Stand-by power less than 0.5W. √ Efficient 24-7 battery maintenance.

Weatherproof. Rated for use down to -40°C / -40°

IDEAL FOR: STD, AGM, GEL, SLI & DEEP CYCLE 6 & 12V batteries from 3 – 120Ah (up to 160Ah for 6V).

CHARGING AMPS: 4A (6V) / 3A (12V) (Ampmatic)

CHARGING VOLTS: 6V range: 0.5V – 7.2V; 12V range: 8V (0.5V*) – 14.4V

*Voltage safety check. Will not charge if battery voltage does not match selected voltage. User must confirm it is a low volt 12V battery > press selection button for 3 seconds to confirm > then lowest charge voltage for 12V is reduced to 0.5V.

OPERATION: Selectable

STEPS: 8

FEATURES: SAVE & CHARGE all 6V & 12V lead-acid batteries.

USE: Indoor / Outdoor  (lowest temperature: -40°F / -40°C).

INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).

STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.

SAVE : Low Volt Start of 0.5V + 2 step desulphation recovery.

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

INCLUDED: weatherproof battery lead & battery clip set.

WARRANTY: 3-year limited replacement warranty.

1" Deluxe Line Clutch Lever Assembly 

Made from forged aluminum body, our DELUXE line cable control comes in aluminum clamp with brass or aluminum lever, perfectly matching our deluxe master cylinder, available for clutch side or for brake side, it fits all 1" handlebars. The left side comes with a special cable pin, for early and late cable clutches. The right side works perfectly with mechanical drum brakes, with our wire master cylinder, and in many custom applications. Available in 4 different finishes, polish, satin, raw and black finish. NOTE: the brass cable register is sold separately.

Tire Sealer and Inflator