All

Tech-Air Off-road System

Tech-Air® Off-Road is an FIM homologated Airbag System designed specifically to handle the rigors of Rally riding and provide unrivaled upper body protection. Developed and tested since 2017, in the most grueling conditions of the Dakar Rally, the world’s toughest off-road race, the Tech-Air® Off-Road System offers the most advanced active airbag technology for off-road riding. The Tech-Air® Off-Road System, with the active airbag inflated, delivers CE Level 1 full Chest and full Back protection, plus coverage to the shoulders, neck, and collarbones in the event of a crash. The System is integrated with an Alpinestars Off-Road Protection Jacket that is equipped with a Level 1 passive full back and limb protection, integrated protection on the arms and a CE Level 2 passive full chest protector to offering riders enhanced roost protection against rocks, debris, and other obstacles they may come into contact with on the trail. Built tough enough to tackle any terrain, the System comes pre-loaded with three Riding Modes; ENDURO, RALLY, and STREET, making it the perfect choice for every type of off-road and street riding.

TECH-AIR® OFF-ROAD RIDING MODES: ENDURO, RALLY, AND STREET

The Tech-Air® Off-Road System provides protection in ENDURO, RALLY, and STREET Modes including crashes against obstacles and loss of control falls (commonly referred to as ‘low-side’ and ‘high-side’ type falls).

• ENDURO Mode is optimized for low and medium-speed trails where the User rides on unpaved surfaces like gravel, riverbeds, mud, and other natural terrain. Typically, these riding scenarios include several changes in riding directions, tackling obstacles and hills at lower speeds.

• RALLY Mode is optimized for fast off-road action on any type of terrain and recommended for riding characterized by longer straight sections with multiple
bumps and different types of terrain crossed at higher speeds, unlikely encountered in typical Enduro competitions. Typical environments where these riding scenarios occur are mainly characterized by desert terrain (with dunes and sandy ground), gravel and open countryside settings.

• STREET Mode is optimized for asphalt roads including situations in which the rider’s motorcycle is hit by another vehicle while stopped.

Protection

 FIM Cross Country Rally Regulations Homologated for race use.
• Proven to be more than twice as protective as passive impact protectors.
• Dual gas inflators deliver two airbag deployments for guaranteed protection.
• Average inflation time of 52 milliseconds (depending on the size of the airbag).
• Airbag coverage on chest, back, shoulders, and neck provides upper body protection.
• Neck protection is provided by the airbag inflating around the neck in compliance with the FIM regulations.
• The airbag has been fully certified for up to 4 airbag deployments before having to replace it, providing the airbag hasn’t been damaged in one of the first 3 deployments.
• Performance tested according to DOLOMITICERT S.c.a.r.l. M.16.03.001.1 Protocol for Airbag Protectors Rev. 5 5/07/2022 on ENDURO, RALLY, and STREET algorithms.
• Performance tested according to DOLOMITICERT’s Technical Disciplinary for Inflatable Protectors with Electronic Activation Revision 5 dated 13 October 2023.
• IMPORTANT: neck protectors are NOT compatible with Airbag Systems, accordingly, the Tech-Air® OFF-ROAD System is NOT compatible with the use of Alpinestars’ Bionic Neck Support (BNS) nor any other neck protections.
• ALPINESTARS OFF-ROAD PROTECTION JACKET TECH SPECS
• Premium materials combined with an innovative design and honeycomb Nucleon Cell technology create a passive protector that is highly ventilated, lightweight, ergonomic, and robust.
• Constructed from a breathable stretch mesh for superior ventilation while keeping the protection close to the rider’s body, the protective garment is CE CE-certified Class C undergarment.
• Slim fit stretchable fabric construction features a floating, highly ventilated, and flexible thermoformed chest protector for an optimal riding experience.
• Both the chest and back protectors incorporate new Nucleon CELL Technology which is light, flexible, and highly ventilated for enhanced performance.
• The Protection Jacket’s passive Chest protector is certified to CE Level 2, while the Back, Elbow, and Shoulder protectors are certified to CE Level 1, providing additional protection against impacts in key areas; elbows and shoulders protectors are replaceable.
• Lateral zipper for a better fit and ease of use, which allows the jacket to provide complete front chest protection.
• Ergonomic design delivers exceptional rider comfort and freedom of movement.
• Additional front padding on the arms and chest for enhanced roost protection.
• Water bladder compatible: back holder for a Hydration pack with 1.5-3 Liter capacity already included.

AIRBAG System Tech Specs

• Robust internal housing located in the built-in CE-certified Nucleon CELL back protector accommodates the System ECU and gas inflators, allowing the Tech-Air® Off-Road System to be worn with any Alpinestars’ Tech-Air® Ready jacket or any properly fitting motorcycling jacket.

• The Tech-Air® Off-Road System’s ECU is seal-protected within the vest to ensure all-weather performance and the vest and componentry are certified to function between -10°C and 50°C.

• The ECU has been homologated to ECE R10 04 which ensures the unit’s electromagnetic integrity and stability.• Bluetooth connectivity to a Tech-Air® App means the System’s operational status, battery status and My Ride Trip recording can also be easily accessed on a mobile device, subject to network coverage.

• Users can easily update the System’s firmware when improved crash-detection algorithms are released via the Tech-Air® App.

Key Features

• The world’s first dedicated off-road Airbag System, Tech-Air® Off-Road comes with 3 Riding Modes; ENDURO, RALLY, AND STREET.

• Riding Modes are easy to navigate while on the move via the LED Display located on the front of the System, or via the Tech-Air® App.

• The Tech-Air® OFF-ROAD System features dual charge capability which means that with two full gas inflators, the System provides two separate airbag
deployments, since only one gas inflator will deploy to inflate the entire Airbag System during a crash scenario.

• Quick release cover opening allows for rapid gas inflator replacement by the user, only available in countries where gas inflator replacement by individuals is permitted by local regulations.

• A fully self-contained, standalone system; 3 accelerometers (1 triaxial accelerometer) and 3 gyroscopes (1 triaxial gyroscope) are integrated into the Electronic Control Unit (ECU) to provide the best crash monitoring performance and active airbag protection in a variety of dynamic off-road riding scenarios. No external sensors are required for the system to operate.

• The Tech-Air® OFF-ROAD System uses an integrated, certified lithium-ion battery, with a fully charged battery life of 30 hours and a recharge time of approximately 4 hours; charging the battery for approximately 1 hour will provide approximately 8 hours of riding time use.

• The LED Display features an integrated charging port for convenient and easy charging of the System; simply plug the USB-C cable into the Recharge Port on the System’s LED Display and connect it to a power source.

• Ease of use; to turn on the Tech-Air® Off-Road System, simply zip up the System and it will automatically turn on and activate the Airbag System. To deactivate the airbag, unzip the System and it will automatically turn off.

• A dedicated Shipping Mode slide switch is located on the ECU, which when turned on effectively puts the System into sleep mode. Only accessible once the Electronic Case on the back protector is removed, the Shipping Mode switch allows the battery to be disconnected from the System during transportation or when the System will not be in use for a prolonged period of time. The System is sold with the Shipping Mode turned on, make sure to turn the Shipping Mode off when you open the box and use the Airbag System for the first time.

• The Tech-Air® Off-Road System’s Electronic Control Unit (ECU) and airbag are completely removable so that the Protection Jacket can be washed separately

Canvas Tech-Air 3 System

Tech-Air 3 Canvas technology provides a slim, self-contained wearable airbag system designed to be worn over any motorcycling jacket or garment. Active electronic system that features six triaxial integrated sensors (3 gyroscopes and 3 accelerometers) and a crash algorithm leveraging AI to accurately monitor when to deploy the airbag in the event of an accident.

• The systems decrease impact force by up to 95% compared to a passive protector.
• 40+ hour battery life and quick/easy charging.
• Bluetooth connectivity for use with Tech-Air App to check system status, battery life, detailed ride analysis, algorithm changes*, and convenient wireless software updates.
• Maximum inflation time of 25-50ms based on the volume of the airbag
  size.
• Two versions, one featuring a main chassis constructed with premium canvas that has been softened for comfort, and one featuring a stretch
  nylon canvas main chassis. Both feature a waterproof ECU and electronics.

Leather Tech-Air 3 System

Tech-Air 3 Leather technology provides a slim, self-contained wearable airbag system designed to be worn over any motorcycling jacket or garment. Active electronic system that features six triaxial integrated sensors (3 gyroscopes and 3 accelerometers) and a crash algorithm leveraging AI to accurately monitor when to deploy the airbag in the event of an accident.

• The systems decrease impact force by up to 95% compared to a passive protector.
• 40+ hour battery life and quick/easy charging.
• Bluetooth connectivity for use with Tech-Air App to check system status, battery life, detailed ride analysis, algorithm changes*, and convenient wireless software updates.
• Maximum inflation time of 25-50ms based on the volume of the airbag
  size.
• Two versions, one featuring a main chassis constructed with premium leather that has been softened for comfort, and one featuring a stretch
  nylon canvas main chassis. Both feature a waterproof ECU and electronics.

Moto II 12v Powered Mount Insert

Never worry about your Moto II running out of juice again. This powered mount insert allows any compatible mount* to be converted to effortlessly charge a Moto II whilst riding.

• Easy installation
• Connects directly to 12V bike battery terminals
• Adjustable orientation with top or bottom cable exit
• Weatherproof, sealed design with replaceable contact pins
• Auto power switching to prevent flat batteries

*Not compatible with Universal Mount

What’s included:

• Powered mount insert
• Extended mount insert bolts
• 2 meter 12V battery terminal cable
• 2 x zip ties
  

Notes:

This powered mount insert is designed to allow the Moto II device to be charged whilst riding. It is designed to be connected up to a motorcycle battery using ring terminals, which is typically how other accessories are connected to motorcycles, such as heated grips.

The design allows all the mounts (except the Universal mount) to be adapted to power the device. To install, the original mount insert must be removed from the mount, then the powered insert is put in its place. The Powered Mount Insert will come with three different screws to allow it to be attached to all the different mount options.

It uses pogo pins to charge the device via contacts which are on the bottom of the device. There are a number of design features to avoid issues with corrosion that can typically effect this sort of charging mount for other navigation products. Corrosion can occur as the mount is likely to be left outside in bad weather for long periods of time.

The powered mount insert can be installed with the cable exiting either at the top or bottom side. A rectifier chip in the device enables this by allowing either contact to receive positive or negative charge.

G-Voyager CDG Boots

The Gaerne Voyager is suitable for those who use their bikes every day, especially in cities, and that requires a product that can combine style and safety. For the design, Gaerne was inspired by the world of fashion while as regards the technical aspect, the Gaerne Voyager is equipped with protection in the ankles area, reinforcements in the heel, and protection for the change. The rubber sole is non-slip and the locking system makes use of laces and external zip. These elements allow the collection Gaerne Voyager to pass tests. There is a wide choice of colours and internal membranes, there is something for everyone and all the seasons!

Please note, Gaerne designs its shoes and boots to fit a half-size bigger. They recommend sizing down if you are in between sizes.

Features

• High-quality, hard-wearing velour leather
• Waterproof and breathable Gore-Tex® membrane
• Double-sewn Olli-Area
• Ankle gel protector
• Reinforcement in the heel area
• Closure with Gaerne Aqua-Zipper
• Lace-up shoe look
• Metal lace eyelets
• Breathable lining
• Exchangeable, anatomically shaped footbed
• Non-slip, abrasion-resistant Gaerne sole
• Sole is resistant to oil and petrol

Level 1 LP1 Shoulder Protectors

The D3O LP1 utilizes the latest material innovation from D3O which offers increased durability while offering great impact protection whilst remaining low profile and lightweight. The new highly vented geometry offers a 45% improvement in breathability.

Features:

• Highly vented geometry offers 45% improvement in breathability
• Advanced, breathable protection for motorcycle and mountain bike
• Soft and flexible with lightweight, low profile design
• Sold in pairs
• CE certified to EN1621-1:2012 Level 1 protection in ambient, wet, hot  and cold conditions
• Dimensions in mm: 222mm x 128mm
• Thickness mm: 11mm
• Weight in g: 91g

Bandana - MotoBull

Our MotoBull bandana has multiple different uses both on and off the bike! Use as a facemask, neck warmer, headband and much more!

• Breathable
• Wind Resistant
• Moisture Wicking & Quick Drying
• UV Protection

Sector S22 Jersey - Minimal Black

Torsten Hallman was a Swedish motocross racer from 1959 to 1971. He is considered one of the greatest racers of all time and was an integral part of bringing motocross racing to the United States. He founded an off-road racing apparel company which is still seen on motocross tracks all over the world today

Product Features

• Hybrid style sleeves for optimal mobility
• Moisture wicking material keeps you dry
• No-fade sublimated graphics
• Heat transfer neck label
• Drop tail design helps keep jersey tucked in

External Weld-On Cable/Wire Guide

Looking for a way to clean up your cables and/ or wiring? The folks at Prism Supply Co. have you covered! These weld-on cable guides are perfect for cable and wire route planning during your build. With both an internal and external wiring option, your wiring will look cleaner than anyone else's! 

• Work perfectly for electrical wires, throttle cables, clutch cables, and brake cables
• These come in raw steel.
• Can be welded/ brazed on.
• Can work with either throttle cable or electrical wires.
• Each guide is sold individually.

Deluxe Wire Operated Master Cylinder - Polished Aluminum

Built-in billet aluminum, with a small external size, for easy mounting in many places on the bike

Hide this away or leave it visible. The 2 mounting holes allow the master cylinder to fit with spacing from 33mm to 38mm.

Come with a 14mm (9/16”) bore inside piston, and can be used for many custom applications, brake or clutch systems.

Gen 2 Baseplate Kit

This kit includes a pair of replacement baseplates for your Gen 2 Gringo S and Lanesplitter helmets. 

• Replacement baseplate kit for Biltwell Gringo S and Lane Splitter helmets
• Allows you to repair ore replace one of the baseplates that mount your helmet's shield

Please note that this does not include the outside hardware plate.

Lane Splitter ECE R22.06 - Gloss Black

Insta360 Ace Pro + 128 GB MicroSD Card

Co-engineered with Leica, the Insta360 Ace Pro boasts truly superior imaging performance courtesy of an elite 1/1.3" sensor, 5nm AI chip, and Leica SUMMARIT lens. Creators can enjoy stunning 4K120fps video, 48MP photos, PureVideo for low light shooting, PD fast charging to 80% in just 22 minutes, and more.

The Insta360 Ace Pro is packed full of unique, smart shooting features that utilize the latest in AI developments. Practical elements like a vlogging-friendly 2.4" flip touchscreen provides excellent creative flexibility. Meanwhile, innovative functions such as the option to pause or cancel a recording, gesture and voice control, plus the brand new AI Highlights Assistant and custom-keyword based AI Warp feature transform the shooting and editing experience.

As a major determinant of a camera's image quality, Ace Pro's premium 1/1.3" sensor immediately sets it apart from many of its competitors. It captures more light and offers far better dynamic range, making it capable of high-level performance even in fast-moving action scenarios or with challenging lighting. Not only that, but Ace Pro was co-engineered with Leica, bringing all their expertise in optical design and imaging to the camera.

Ace Pro also has a unique, dedicated shooting mode for low light: PureVideo. Powered by a 5nm AI chip, the camera uses a custom-trained AI neural network to denoise the footage for a clearer image in real time. Meanwhile, that big, beautiful sensor on Ace Pro captures huge levels of detail with impressive stabilization, even at night! This expands the use you'll get out of the camera, from twilight strolls to late-night urban shooting.

During the day, again Ace Pro comes packing heat with built-in Active HDR (High Dynamic Range). This is especially helpful for shooting scenes with both bright and dark areas, with more details in the highlights and shadows and more vibrant footage. A serious amount of work has also gone into colour accuracy. Ace Pro delivers accurate and rich colours, excelling even when underwater.

AI is a key element in the overall image quality too. Insta360’s dedicated R&D teams have specifically trained computational photography models, based on the camera's unique lens and sensor data. This model underpins the 48MP Photo Mode and 4K30fps PureVideo, enhancing both the signal-to-noise ratio and dynamic range in low light, surpassing all other action cameras on the market in the process.

A Smarter Way to Shoot | Inside and Out

Ace Pro's robust 2.4" flip touchscreen lets you see exactly what you're shooting at all times, making framing your shots a breeze. This flexibility makes the camera incredibly useful for vlogging, selfies, hard-to-capture angles, and various action scenarios for optimal preview. What's more, a magnetic mounting system lets you quickly mount your camera and seamlessly switch between accessories. Less fussing with screws and knobs, more filming the action.

Internally, a series of new features solve problems that have plagued action enthusiasts for years:

Clarity Zoom
Want a close-up but the image quality becomes too poor? Ace Pro can zoom in and out 2x without any loss in quality.
 

Gesture Control
Use hand signals to start/stop recording or take a photo! Perfect for group selfies, noisy environments, or if using voice control doesn't feel right (though it has this function too).
 

Cancel Recording
Failed the trick? Messed up a line? Instantly cancel the recording and go again, saving space on the SD card and fewer files to sort through.
 

Pause/Resume Recording
Time between shots? Hit pause and record to keep everything you want to film in one continuous file for easier file management and editing.
 

Photo Grab
You're filming a video when an ideal photo op presents itself. Keep filming and take a photo at the same time, but in far higher resolution than a screen grab from the video.

Unlock Your Creativity

The Ace Pro comes equipped with a unique Stats Dashboard and is the first action camera to integrate seamlessly with your Garmin device or Apple Watch, allowing you to overlay your videos with GPS, speed, and other data. Share your adventures with a new level of detail, whether you're cycling, running, or enjoying the great outdoors.

AI Warp is another new creative tool, the latest addition to Insta360’s expanding Shot Lab lineup. Through preset or custom keywords, you can add dynamic effects to your videos. This premium AI feature is highly customizable, giving your footage an incredibly unique twist based off of any prompt you can think of. As Insta360 continues to embrace the game-changing capabilities of AI, you can expect more features added to Shot Lab on the Insta360 app heading into 2024.

The Ace Pro also features Insta360's signature eye-popping shooting modes, including the ability to shoot timelapses, hyperlapses (in TimeShift mode) and so much more. The infamous Invisible Selfie Stick effect is also possible with the Ace Pro via the new AI Selfie Stick Eraser, rendering your selfie stick invisible in shots for an immersive third-person experience.

AI Highlights Assistant

Insta360 likes to make shooting as easy as possible, but every creator knows that feeling of looking at an intimidating number of files and not knowing where to start. Enter the revolutionary new tool, AI Highlights Assistant.

First, it automatically detects the peak moments in a video, and delivers 'clip highlights' for in-camera review. Creators can merge every thrilling moment into one incredible recap, or choose the ones they like, and quickly delete any unwanted clips to save storage.

And like magic, the Assistant will also edit your latest adventures into one epic video and push it directly to your phone or mobile device via the Insta360 app. Look back on all your Moments and relive unforgettable memories, just like the first time.

The Insta360 app is also packed full of advanced AI editing tools. Take advantage of slick auto-editing tools to have your clips ready in moments, or go manual with our full editing suite. There's really no limit to what you can do.

• Bundle includes 1x Ace Pro, 1x 1650mAh Battery, 1x Standard Mount, 1x Flexible Adhesive Mount, 1x Type-C to C Cable, and 128 MB MicroSD card
• A 3-Prong to 1/4" Adapter (sold separately) must be attached to the Standard Mount to mount the camera on a selfie stick or other accessory.
• Selfie stick sold separately
• Note: Pre-installed Lens Guard cannot be removed/replaced. Free repair within 1 year of purchase, excludes shipping.

Ghost/Speed Bandit Exterior Shield - Hi-Def Blue

Simpson helmet shields are offered in clear as well as stylish and functional tints. When ordering a shield for your motorcycle helmet, keep these considerations in mind:

• Clear shields are generally used for night or very low light conditions
• Amber shields provide a minimal amount of tinting that's ideally suited to overcast weather
• High definition blue was first used by desert racers in dusty condition, but similarly to the amber shields it helps enhance contrast in cloudy conditions
• Tinted shields can help to eliminate glare during daytime riding

Some people find that mirrored shields block even more sunlight than tinted shields and Iridium shields provide the most protection from both sunlight and glare

Dry Shower

Muc-Off Dry Shower is an innovative antibacterial body wash designed for people on the move. Whether you’re a cyclist, commuter, lunch time trainer, festival goer, camper, backpacker, trail runner, motorcyclist or just an all around active person. Dry Shower is the perfect way to freshen up without water!

Specifically formulated to kill odour causing bacteria and germs with its gentle yet effective, coconut derived cleaning ingredients, Dry Shower leaves you feeling (and smelling) fresh and clean. We’ve even made sure Dry Shower is safe to use by creating a formula that’s free from parabens and formaldehyde.

With Dry Shower’s foaming action simply apply and rub in with your hands, then leave to dry or wipe off with a towel.

Dry Shower is suitable for vegans and is cruelty free.

• Formulated with coconut
• Kills odour causing germs and bacteria
• No water or towel needed
• Paraben and Formaldehyde free
• Kills 99.9% Germs

Ghost and MOD Bandit Interior Shield - Dark Smoke

Interior shield for Ghost Bandit, Venom, and Mod Bandit helmets.

Simpson helmet shields are offered in clear as well as stylish and functional tints. 

Moto 3 - Matte Black

• 3 Shell and EPS Sizes for a Personalized Fit 

• Bell Moto-3 original styling

• EPS-lined chin bar

• Lightweight Fiberglass composite shell

• Removable/Washable anti-microbial terrycloth liner

• Removable/Washable micro-suede liner on specific graphics

• Secure 5 Snap Visor 

Pro Series MX Style Shifter Peg - Black

TC Bros. Pro Series MX Shifter Peg (sold each) is designed with the high-performance Harley Davidson rider in mind. Inspired by the off-road racing world and refined for the ultimate on-road experience, this peg provides high traction and stability. Precision machined right here in the USA from the highest quality materials, this shift peg is extremely strong and lightweight. Providing 360-degree adjustability and a design that perfectly complements a set of our Pro Series MX or MX Lite foot pegs, these pegs also work very well as both a shifter peg and a brake pedal on our Pro Series mid controls kits.

Features:

• 360-degree adjustable to provide a perfect angle to fit your bike and foot. 
• CNC machined from strong and lightweight 6061-T6 aircraft-grade aluminum. 
• Replaceable stainless steel cleats will not rust and are specifically machined to provide the proper amount of traction for motorcycle footwear.
• 2" long x 1" wide surface provides excellent engagement, while the large radius profile on the underside prevents tearing up the toe surface of your footwear while upshifting.
• Black anodized finish for great looks and corrosion resistance (other finishes available). 
  
• Proudly made in the USA.
• Peg installs using basic hand tools.
• Replacement parts and tech support after the sale.

Fitment:

• Peg includes 5/16-24 socket head mounting hardware that fits OEM shifters on most Harley Davidson models including Dyna, FXR, Softail, Touring, and Sportster models (excluding water cooled "Revolution Max" engine models). 
• Compatible with TC Bros. brand mid controls and forward controls kits. Note that these are sold each, and 2 would be required for any TC Bros. brand foot controls kits.