Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.
Technical Details
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle
Install Tips
Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell moulded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1- or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation, you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.
Customize and upgrade the look and feel of your Harley Sportster with a high quality USA Made bolt on mid controls kit from TC Bros. Designed to fit all 883 and 1200 Sportster 5-speed models produced from 1991-2003. These controls feature classic lines and timeless good looks. Detailed mounting instructions & quality hardware included to ensure trouble-free installation.
TIG welded mounting brackets with durable black powdercoat finish.
Proudly made in the USA.
Detailed mounting instructions and hardware included.
Foot position is the same as a set of OEM Harley mid controls for an all around, comfortable ride.
Replacement parts and tech support after the sale.
TC Bros. - 7/8" Single Cable Motorcycle Throttle - Black
Regular price
$147.00
7/8" Single Cable Motorcycle Throttle (Black)
7/8"" throttles are the perfect solution for eliminating the bulky throttle/switch housings on your vintage Honda or Yamaha motorcycle. The minimalist design features an investment cast aluminum housing with classic good looks. The billet aluminum grip tube is CNC machined with a knurled finish to accept a huge variety of aftermarket rubber grips.
The unique design of these throttles fit many models including:
Honda single throttle cable models such as: CB350, CL350, CB450 & CL450
Also can be used as a universal application with custom cables to allow fitment of many years, makes, and models.
These throttles are available in either a black anodized or hand-polished finish. You are currently viewing the 7/8" Single Cable throttle in black finish.
This CNC machined chrome handlebar mounted dual microswitch can be used to operate horns, kill switch, turn signals, starter relay, or just about anything you can think of! Compact design keeps your bars tidy. This switch is set up to run wiring through your handlebars. This switch housing requires drilling your handlebars. (Note: use relays for high current loads such as starter)
TC Bros - Sportster Mid Controls Kit (No Pegs) for 91-03 5 Speed
Regular price
$335.00
Sportster Mid Controls Kit for 91-03 5 Speed
Customize and upgrade the look and feel of your Harley Sportster with a high-quality USA Made bolt-on mid controls kit from TC Bros. Designed to fit all 883 and 1200 Sportster 5-speed models produced from 1991-2003. These controls feature classic lines and timeless good looks. Detailed mounting instructions & quality hardware are included to ensure trouble-free installation.
This is the same kit as thismid controls kit, except without footpegs or toe pegs.
You can re-use your stock pegs if on a budget, or choose from the vast array of aftermarket Harley pegs available today and get the exact look you desire.
Features:
Precision fit bronze bushing pivots.
TIG welded mounting brackets with durable black powder coat finish.
Proudly made in the USA.
Detailed mounting instructions and hardware are included.
Foot position is the same as a set of OEM Harley mid controls for an all-around, comfortable ride.
Replacement parts and tech support after the sale.
MID-USA Throttle Cable Repair Kit
Regular price
$31.95
Throttle Cable Repair Kit
Everything needed to replace a broken inner wire throttle cable
No need to remove the outer sleeve to make the repair
Supplied in a convenient to store tin that is 21/2" round x3/4" thick
A must for roadtrips, your tool pouch or saddlebag
MID-USA Repair Kit includes: 60" cable, one extra throttle locking barrel & one carburetor set screw locking barrel with an allen wrench
Prism Supply Co. "Super Prism" Throttle
Regular price
$328.95
"Super Prism" Throttle
"Super Prism" Throttle Assembly contains the following:
Polished aluminum throttle housing
1/4 turn action with built-in internal stops
1" aluminum throttle sleeve
Includes all necessary mounting hardware
Designed to be used with all stock HD throttle cables with snap ring
Includes a barrel end to cut the cable to the desired length
TC Bros. 7/8" Tracker Handlebars are made in the USA from 7/8 inch OD x 0.095" wall premium American steel tubing.
The bends are created on a CNC mandrel bender for high quality and flawless symmetry. These bars feature a satin black powdercoat finish for durability and great looks.
The flat-track inspired design is comfortable, and looks great on just about any bike. These bars fit stock cables, brake lines, and wiring on most motorcycles.
Please see photos for dimensions and specifications to confirm fitment.
TC Bros. 7/8" Drag Bars - Black Powdercoat Finish
Regular price
$97.00
Choppers 7/8" Drag Handlebars
TC Bros. Choppers 7/8" Drag Handlebars are made in the USA from 7/8 inch OD x 0.095" wall premium American steel tubing. The bends are created on a CNC mandrel bender for high quality and flawless symmetry. These bars feature a black powdercoat finish for durability and great looks. They are much higher quality than any imported drag bar you will find. 28" overall width and 2" pullback make for a great looking bar on just about any bike. These bars fit stock cables, brake lines, and wiring on most motorcycles. Please see photos for dimensions and specifications to confirm fitment.
TC Bros. 1" Slant Z Handlebars
Regular price
$225.00
1" Slant Z Handlebars
Our 1" Slant Z Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. All joints are precision fit and hand TIG welded to a finish you will be proud to display. The uprights angle inward resulting in an aggressive looking bar that looks great on a variety of bikes. With 6" of rise and a 24" overall width, these bars are narrow while remaining comfortable. These bars fit stock cables, brake lines, and wiring on most Harley models.
Available in two configurations:"Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls.
Available in two finishes:Triple chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
Smooth configuration bars may also be used on many Triumph models or Metric Cruisers with 1" diameter stock handlebars.
TC Bros. 8" Springer Apes Handlebars - 1"
Regular price
$210.00
1" Springer Apes Handlebars
Our 8" Rise Springer Apes Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. They are CNC mandrel bent for ultra-smooth bends and flawless symmetry. Knurled riser clamp locations are 4.75" on centers to fit most aftermarket (Moto Iron,Paughco, DNA, Hardbody, etc) and stock Harley springer front ends. With 8" of rise and sufficient pullback, these bars are very comfortable and fit stock cables, brake lines, and wiring on most Harley models.
Available in two configurations:"Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls. Dimpled bars are drilled for internal wiring.
Available in two finishes:Triple chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
motogadget motoscope tiny
Regular price
$400.00
Motoscope Tiny
The motoscope tiny is a very small, analogue speedometer in 49mm format.It measures the speed digitally and displays it precisely using a stepper motor and pointer.The installation diameter of 49 mm and the installation depth of only 24 mm open up a wide range of installation options.Refined technology makes the classic look possible without compromise.The dial has no display cut-out or LCD and looks convincing in the classic style.The perfect solution for purists and minimalists.
This is a special order item. Please allow for three to four weeks for delivery. Feel free to contact us first for availability
casing
The high-quality aluminum housing is turned from solid and its surface is black anodized.The screw ring is also available black anodized or high-gloss polished.
The housing is 100% waterproof and insensitive to vibrations.
Display
The analogue dial in black and white contrast is indirectly illuminated by white LEDs.An innovative LED display is hidden behind the black part of the dial, which only lights up through the dial when it is in operation and is not visible when switched off.
In order to achieve optimal readability in darkness, sun and twilight, the luminosity of the LEDs is automatically adjusted.
If the 200 km / h on the analog scale is exceeded, the speed is automatically shown in the LED display.The maximum speed is also saved.
The 4 indicator lights (blue, red, 2 x green) are also integrated into the dial.These also only become visible during operation.
service
You can switch between the LED displays using the menu button supplied or, for example, the flasher button on the handlebar.
The standard indication on the display is the time.If necessary, the values for total kilometres, daily kilometres, onboard voltage, etc. are displayed by briefly pressing the button.
All functions, such as resetting the daily kilometres or the like, are easy to operate using the button.Presetting or saved values are of course saved even without power supply.
Cultivation
The motoscope tiny is easy to attach using the two M3 threaded sockets on the back.We offer various brackets for assembly.See under assembly.
Connection and sensors
The detailed installation and operating instructions (see under Downloads) make the connection of the instrument possible even for users who have previously stayed away from the vehicle electrics.
The supplied stainless steel speedometer sensor is very small (M5 / 23 mm) and easy to hide.With the 1.5 m long connection cable, it can be easily attached to the front or rear wheel.This means that vehicles with an original mechanical speedometer drive can also be easily converted.
The motoscope tiny is compatible with many original speed sensors (reed contact and proximity sensors) from the vehicle manufacturer.In this case, only connections are connected and the mechanical installation of a sensor is completely unnecessary.
An intelligent 'Teach function' enables the speedometer to be calibrated easily - even for vehicles with sensors on the gearbox such as Harley-Davidson (TM).
scope of delivery
The instrument with approx. 75 cm connection cable
Mini push-button
2 flying fuses
9 cable end connectors
Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connection cable
2 strong neodymium mini magnets
2 mounting screws M3 with washers
2 diodes for merging the indicators
Detailed installation and operating instructions
Specifications and features
Technical specifications
Mounting diameter
49 mm
Weight
approx. 96 g
Attachment
2 x M3 threaded bushes
Current consumption in operation
approx. 200 mA (depending on load)
Power consumption in idle state
0 mA
Operating voltage
9V - 15V
operating temperature
-20 ° ... + 80 ° C
function
Measuring range
Analog speedometer (pointer)
0 - 200 km / h or mph
Numerical speedometer (LED display)
200 - 999 km / h or mph
maximum speed
0 - 999 km / h or mph
Board voltage
9-15V
Time
00:00 - 23:59
Trip odometer
0 - 999.9 km or mi
Total kilometres (adjustable)
up to 99,999 km or mi
Indicator lights
Indicator, high beam, neutral, warning lamp
Biltwell Tracker Mid Handlebars 1"
Regular price
$179.95
Tracker Mid Handlebars 1"
The top-selling handlebar in our range, and for good reason. Our Tracker bars come in two O.D.'s and three heights and look great in any stock or aftermarket riser you can imagine. These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 Chromoly tubes. Available smooth for a custom application or TBW to accept Harley's throttle-by-wire control module. TBW is also slotted and fitted with a reinforced nylon plug in the end on the throttle side. Lets the handlebar work with select stock and aftermarket single - and dual - cable throttles. Simply remove the plug for TBW compatibility.
Technical Details
Seamless 0.120" (3mm) wall 4130 Chromoly construction
Precision mandrel-bent tubing for comfortable, precise ergonomics
Black electroplate and mirror chrome-plated finishes are available
Two sizes available: 7/8- and 1-inch O.D.
1" O.D. model available in smooth for a custom application, slotted to accept OEM Harley-Davidson hand controls, or TBW to accept Harley's throttle-by-wire control module
Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.
Form and Function
With a back sweep less severe than most stock handlebars, any Tracker in our range is a great replacement for riders who want to ditch the wheelbarrow feel of OE bars. When people ask for our advice on which Tracker to mate with any given Murdock riser, we recommend building a combo that puts your hands slightly below or even with the height of your shoulders when you're sitting comfortably on your motorcycle. Hands higher than shoulder height is popular, but it's a position better suited for experienced riders. If the cables and control wires on your bike prohibit going too tall or wide with your bars, combine our low or mid Tracker with some Slimline or Thunder risers for a clean, race-inspired, comfortable cockpit.
TC Bros 6" Chrome Springer Risers
Regular price
$205.00
6" Springer Risers Chrome
Features:
CNC Machined from 6061-T6 Billet Aluminum
Chrome Finish.
1/2-20 socket head mounting bolts included for a perfect fit to AFTERMARKET springer front ends.
Subtle branding on the underside of the riser is hidden once installed.
Fitment notes:
Please note that these risers only fit AFTERMARKET springer front ends with 1/2-20 internal threads (brands such as Moto Iron, Paughco, DNA, Hardbody, etc.). These do not fit OEM Harley springer front ends as they have larger diameter riser threads.
motogadget MST Vintage Gauge
Regular price
$470.00
MST Vintage Gauge
The mst vintage is a small, analogue speedometer with a brass bezel in an appealing 'old school' look.
The design is different, but technically it is identical to the motoscope tiny. The dial is based on the streamlined design of the '40s and '50s. Additionally, it features a yellowed and cracky surface giving the dial its extremely aged look.
The bezel and indicator are made from solid brass and have been manually coated with patina. The created patterns and signs of ageing vary with each instrument and give it an individual and unique look.
There is a special matching Streamline Cup available for the mst Vintage - made from solid brass with a patina. Refer to 'Mounting'.
Apart from weight, all further properties and specifications of this instrument are identical with the motoscope tiny.
Parts delivered
Instrument with approx. 75 cm connector cable
Mini push-button
2 removable fuses
9 cable end connectors
Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
2 powerful neodymium mini magnets
2 mounting screws M3 with washer
2 diodes for pairing of turn signals
Detailed installation and operating instructions
Specifications and features
Mounting diameter
49 mm
Weight
approx. 110 g
Mount
2 x M3 threaded hole
Power consumption, operating
approx. 200 mA (load dependent)
Operating voltage
9 V - 15 V
Operating temperature
-20°... +80°C
Speedometer, analogue (indicator)
0 – 200 km/h or mi/h
Speedometer, numeric (LED display)
200 – 999 km/h or mi/h
Max. speed
0 – 999 km/h or mi/h
On-board voltage
9 – 15 V
Clock
00:00 – 23:59
Trip meter
0 – 999.9 km or mi
Total distance (adjustable)
99999 km or mi max.
Indicator lights
turn signal, high beam, neutral, hazard light
motogadget MST Vintage Cup Brass
Regular price
$195.00
MST Vintage Cup Brass
The mst Vintage Cup is used for mounting of the mst vintage on 22 mm and 1 in. handlebars. Brass cup for the tiny series, especially the mst vintage - lavishly turned/machined from solid metal. 'Used look' to match with the Vintage instrument. Each cup is unique due to the manually coated patina.
Secure mounting on 22 mm handlebars with polished handlebar clamp. The real 'eye-catcher' for every custom bike. Diameter 56 mm, Length 60 mm.